Presbia PLC
Presbia PLC (Form: 10-K, Received: 03/28/2016 06:03:06)

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

Form 10-K

 

(Mark One)

x

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2015

or

o

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                      to                      .

Commission File Number 001-36824

 

PRESBIA PLC

(Exact name of registrant as specified in its charter)

 

 

Ireland

98-1162329

(State or other jurisdiction of

incorporation or organization)

(IRS Employer

Identification No.)

120/121 Baggot Street Lower

Dublin 2 Ireland

(Address of principal executive offices, including zip code)

Registrant’s Telephone Number, Including Area Code:

+353 (1) 659 9446

Securities registered pursuant to Section 12(b) of the Act:

 

Ordinary Shares, $0.001 Par Value

The NASDAQ Global Market

(Title of each class)

(Name of each exchange on which registered)

 

Securities registered pursuant to Section 12(g) of the Act: NONE

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes   o     No   x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes   o     No   x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes   x     No   o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     x   Yes     o   No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.   x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in 12b-2 of the Exchange Act.

 

Large accelerated filer

o

Accelerated filer

¨

Non-accelerated filer

o

Smaller reporting company

x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes   o     No   x

The aggregate market value of the Registrant’s ordinary shares (the only common equity of the Registrant) held by non-affiliates for the last business day of the Registrant’s most recently completed second fiscal quarter: $30,140,000.

As of March 21, 2016, there were 13,371,445 ordinary shares outstanding.

 

 

 

 

 


 

PRESBIA PLC

2015 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

 

 

 

Page

 

PART I

 

Item 1.

Business

2

Item 1A.

Risk Factors

26

Item 1B.

Unresolved Staff Comments

55

Item 2.

Properties

55

Item 3.

Legal Proceedings

55

Item 4.

Mine Safety Disclosures

55

 

 

 

 

PART II

 

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

55

Item 6.

Selected Financial Data

57

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

57

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

65

Item 8.

Financial Statements and Supplementary Data

66

Item 9.

Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

90

Item 9A.

Controls and Procedures

90

Item 9B.

Other Information

91

 

 

 

 

PART III

 

Item 10.

Directors, Executive Officers and Corporate Governance

92

Item 11.

Executive Compensation

96

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

103

Item 13.

Certain Relationships and Related Transactions, and Director Independence

104

Item 14.

Principal Accountant Fees and Services

107

 

 

 

 

PART IV

 

Item 15.

Exhibits and Financial Statement Schedules

108

Signatures

110

 

 

 

 


 

Cautionary Note Regarding Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements, within the meaning of the Private Securities Litigation Reform Act of 1995, that involve substantial risks and uncertainties. The forward-looking statements are contained principally in the sections of this Annual Report on Form 10-K titled “Business,” “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” but are also contained elsewhere in this Annual Report on Form 10-K. In some cases, you can identify forward-looking statements by the words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “might,” “objective,” “ongoing,” “plan,” “predict,” “project,” “potential,” “should,” “will,” or “would,” and or the negative of these terms, or other comparable terminology intended to identify statements about the future. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to be materially different from the information expressed or implied by these forward-looking statements. Although we believe that we have a reasonable basis for each forward-looking statement contained in this Annual Report on Form 10-K, we caution you that these statements are based on a combination of facts and factors currently known by us and our expectations of the future, about which we cannot be certain.

The forward-looking statements in this Annual Report on Form 10-K include, among other things, statements about:

 

·

the timing, progress and results of our clinical trials, our regulatory submissions and our research and development programs;

 

·

our ability to advance our products into, and successfully complete, clinical trials;

 

·

our ability to obtain pre-market approvals;

 

·

the commercialization of our products;

 

·

our anticipated cash needs and our needs for additional financing;

 

·

the implementation of our business model, strategic plans for our business, products and technology;

 

·

the scope of protection we are able to establish and maintain for intellectual property rights covering our products
and technology;

 

·

estimates of our expenses, future revenues, capital requirements and our needs for additional financing;

 

·

the timing or likelihood of regulatory filings and approvals;

 

·

our financial performance; and

 

·

developments relating to our competitors and our industry.

You should refer to “Part I, Item 1A. Risk Factors” of this Annual Report on Form 10-K for a discussion of important factors that may cause our actual results to differ materially from those expressed or implied by our forward-looking statements. As a result of these factors, we cannot assure you that the forward-looking statements in this Annual Report on Form 10-K will prove to be accurate. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans in any specified time frame or at all. We undertake no obligation to publicly update any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

You should read this Annual Report on Form 10-K and the documents that we reference in this Annual Report on Form 10-K and have filed as exhibits to this Annual Report on Form 10-K completely and with the understanding that our actual future results may be materially different from what we expect. We qualify all of our forward-looking statements by these cautionary statements.

Industry and Market Data

We obtained the industry and market data in this Annual Report on Form 10-K from our own research as well as from industry and general publications and surveys and studies conducted by third parties. Industry and general publications, studies and surveys generally state that the information contained therein has been obtained from sources believed to be reliable. These third parties may, in the future, alter the manner in which they conduct surveys and studies regarding the markets in which we operate our business. As a result, you should carefully consider the inherent risks and uncertainties associated with the industry and market data contained in this Annual Report on Form 10-K, including those discussed in “Part I, Item 1A. Risk Factors.”

1


 

Trademarks

This Annual Report on Form 10-K includes trademarks, service marks and trade names owned by us or other companies. All trademarks, service marks and trade names included in this Annual Report on Form 10-K are the property of their respective owners. Our principal trademark or trade name that we use is Presbia TM .

Part I

In January 2015, we completed a series of corporate reorganization transactions described in “Item 1. Business—Corporate History and Information,” which we refer to herein as the Reorganization Transactions. Unless we state otherwise, the terms “we,” “us,” “our,” “Presbia” and the “company” refer to Presbia PLC and its consolidated subsidiaries after giving effect to the Reorganization Transactions. Prior to the completion of the Reorganization Transactions, the foregoing terms refer to the entities that became the consolidated subsidiaries of Presbia PLC upon consummation of the Reorganization Transactions.

 

 

Item 1. Business

Overview

We are an ophthalmic device company which has developed and is currently marketing a proprietary optical lens implant for treating presbyopia, the age-related loss of the ability to focus on near objects. Our lens, which we refer to as our microlens, is a miniature lens designed to be surgically implanted in a patient’s eye to improve that patient’s ability to see objects at close distances. Our current strategy is to continue to commercialize our microlens in certain strategic countries where we currently have marketing approval and to continue to seek to obtain marketing approval in other key markets, including the United States. Our goal is to become a leading provider of corneal inlay presbyopia-correcting treatment worldwide.

According to Market Scope, an ophthalmic market research organization, presbyopia is a common vision disorder that affects approximately 1.8 billion people worldwide. Presbyopia is associated with the inability of the eye’s natural lens to change shape, or accommodate, in order to see clearly objects in the near and middle distance ranges. According to Market Scope, the worldwide presbyopic population is expected to grow to approximately 2.1 billion by 2020. According to Market Scope, spending on devices, equipment and procedure fees for presbyopia-correcting surgery is expected to increase from approximately $408 million in 2014 to approximately $750 million in 2019 at the manufacturer level. We do not currently have marketing approval in many jurisdictions included in the foregoing global data, which jurisdictions collectively represent a majority of the worldwide presbyopic population. We have marketing approval in a number of strategic countries that we are targeting for commercialization and we are actively seeking marketing approval in certain other strategic countries that we are targeting for commercialization, including the United States.

We believe that our solution offers each of the following benefits:

 

·

our solution is effective as a standalone solution for plano presbyopes, or those individuals who suffer from presbyopia but do not have any other visual disorder, and may also be used in conjunction with laser procedures or lens replacement procedures for those individuals who in addition to being presbyopic suffer from other visual disorders.

 

·

our solution is minimally invasive; our microlens can be implanted and removed in simple, surgical procedures.

 

·

our solution offers significant near vision improvement with little or no loss of binocular distance visual acuity (the ability to see distant objects with both eyes without prescription enhancement) and minimal risk of adverse side effects.

 

·

our solution offers a wide range of corrective power, from +1.5 diopters to +3.5 diopters, in 0.25 diopter increments (a diopter is a unit of measurement of the optical power of a lens).

 

·

once implanted, our microlens is invisible to the naked eye.

In addition, our microlens and the procedure to implant our microlens are not currently reimbursed through private or governmental third-party payors in any country, nor do we anticipate that they will be reimbursable in the foreseeable future. Although the commercialization of our microlens depends on a prospective patient’s ability to cover the costs of our microlens and the implantation procedure and we believe that a substantial portion of presbyopes worldwide do not have the financial means to cover the costs of our microlens, we believe that a direct patient pay model enables medical providers to avoid pricing pressure from private or governmental third-party payors.

In 2012, we completed a 12-month, multicenter, post-marketing evaluation of our microlens in Italy and Greece in presbyopic patients between the ages of 45 and 60. We designed, and oversaw the implementation of, the protocol for this evaluation, which was conducted at our request by a surgeon at the Vardinoyannion Eye Institute at the University of Crete in Crete, Greece and by a surgeon

2


 

at Prato Hospital in Prato, Italy. The average uncorrected near visual acuity (the ability to see close objects without prescription enhancement), or UCVA-near, in the operated eye of the 70 patients who completed the study was 20/110 (Snellen). Following implantation with our microlens, such patients had an average UCVA-near of 20/27 12 months post-su rgery. Although there was a small loss in uncorrected distance vision in the operated eye, there was no significant change in binocular distance visual acuity after 12 months post-surgery. Our microlens has also been the subject of certain third party stud ies. We did not commission these studies or design, review or oversee the implementation of their protocols, and we have limited information with respect to these studies.

In addition to being an effective standalone treatment for presbyopia, we believe that our solution can also be used in conjunction with other surgical approaches that are used to treat vision disorders other than presbyopia. For example, we believe that our microlens procedure can be combined with laser in-situ keratomileusis, or LASIK, procedures, which are used to treat certain near distance and far distance visual disorders, as well as lens replacement procedures used to treat cataracts (whereby the natural lens is replaced with an intraocular lens, or IOL implant). We also believe that our microlens can be used to treat presbyopia in certain post-LASIK and post-cataract surgery patients. We believe that, having undergone eye surgery in the past, certain patients are more likely than the general population to consider eye surgery to treat presbyopia. Moreover, as we believe that our solution can be performed at the same time that certain other forms of vision-correction treatments are being administered, we believe that our solution provides an integrated treatment option for patients and an additional source of revenue for the patient’s ophthalmic surgeon. In this way, we believe that our solution complements existing surgical treatments for vision problems.

Our microlens procedure is performed using a 150 kilohertz or greater frequency femtosecond laser, which is a laser that is currently used in certain LASIK surgeries, cataract surgeries and cornea replacement surgeries. In commercializing our solution, we intend to target those markets with a well-established presence of refractive laser centers equipped with femtosecond lasers. We believe that the existing infrastructure in most such laser centers is sufficient to make our solution an attractive opportunity for such laser centers and our commercialization strategy includes working closely with such laser centers to train and qualify ophthalmic surgeons on the use of our solution.

Through our European Union CE Mark, we are generally authorized to market our microlens throughout the European Economic Area (all European Union member states plus Iceland, Liechtenstein and Norway), or EEA, and Switzerland. We currently market our microlens in certain strategic EEA countries as well as certain strategic countries outside of the EEA in which we possess marketing approval, such as South Korea and Australia. Through February 15, 2016, ophthalmic surgeons have implanted over 750 of our microlenses outside of the United States. For geographic information regarding our revenues and long-lived assets, please see Note 11 to our audited financial statements included elsewhere in this Annual Report on Form 10-K.  

We are presently seeking marketing approval in other strategic countries, including the United States. In order to commercialize our microlens and our proprietary insertion tool, which we refer to as our microlens inserter, in the United States, we must first obtain a pre-market approval, or PMA, from the U.S. Food and Drug Administration, or the FDA. In December 2013, we received approval of our investigational device exemption, or IDE, to commence a staged pivotal clinical trial in order to obtain clinical data necessary to obtain FDA approval to market our microlens and microlens inserter in the United States. We began enrollment for this study in May 2014 and began treating patients in June 2014. Initially, 75 subjects underwent insertion of our microlens at six investigational sites in the first stage of this study. Based on six-month data on 52 of these subjects, in January 2015, we submitted an interim safety report to the FDA along with a supplement to our IDE with the request for approval to begin second stage enrollment. In February 2015, we received approval from the FDA to commence second stage enrollment in this trial. Through February 15, 2016, 346 subjects underwent insertion of our microlens in the second stage of this study. We do not expect to receive approval from the FDA and commence commercial activity in the United States before the fourth quarter of 2018.

3


 

The Eye and Vision Problems

The human eye is a specialized sensory organ capable of receiving visual images and transmitting them to the visual center in the brain. Among the main parts of the eye are the cornea, the iris, the lens and the retina. The cornea is the clear window in the front of the eye through which light first passes. The interior surface of the cornea is lined with a single layer of flat, tile-like endothelial cells, whose function is to maintain the transparency of the cornea. The iris is a pigmented muscular curtain located behind the cornea that opens and closes to regulate the amount of light entering the eye through the pupil, an opening at the center of the iris. The lens, known in medical terminology as the “crystalline lens,” is a clear structure located behind the cornea that changes shape, or accommodates, to focus light on the back of the eye. The retina is a layer of nerve tissue in the back of the eye that senses the light image and transmits it to the brain via the optic nerve. The figure below illustrates certain elements of the basic anatomy of the human eye.

The eye may be affected by common visual disorders, disease or trauma. A normal, well-functioning eye receives images of objects at varying distances and focuses the images on the retina. Refractive errors (including myopia, hyperopia, presbyopia and astigmatism, each described below) occur when the eye cannot properly focus an image on the retina. In addition to presbyopia, common vision problems include:

 

·

myopia, or nearsightedness, which occurs when the eye’s lens focuses images in front of the retina;

 

·

hyperopia, or farsightedness, which occurs when the eye’s lens focuses images behind the plane of the retina;

 

·

astigmatism, an optical defect in which vision is blurred due to an oval-shaped cornea or, in some cases, an oval-shaped natural lens, producing a distorted image on the retina. Astigmatism may accompany myopia or hyperopia; and

 

·

cataracts, a clouding of the lens, which worsens with time and gradually occludes incoming light images.

Cataracts are age-related, while myopia, hyperopia and astigmatism are not. The most common surgical treatment for myopia, hyperopia and astigmatism is LASIK surgery, in which the surface of the cornea is carefully mapped and then a computerized optical laser uses this mapping to reshape the surface of the cornea by ablation to permit proper focusing. Cataracts are most often treated by surgically removing the affected lens and replacing it with a monofocal (that is, a single focus) IOL.

Presbyopia is an age-related refractive disorder that generally begins to develop when a person reaches the age of 35. The disorder may go unnoticed for several years after its initial onset and can worsen with age. The first symptoms of presbyopia are typically experienced when a person begins to have difficulty reading fine print. Presbyopia is associated with a loss of lens “elasticity,” the ability of the lens to change shape in order to focus incoming light on the retina from objects in near and middle distance ranges. Elasticity is slowly lost as people age, resulting in a slow decrease in the ability of the eye to focus on nearby objects. Presbyopia is a natural part of aging and affects substantially all people at some point in their adult lives.

4


 

Presbyopia Market

According to Market Scope, presbyopia currently affects approximately 1.8 billion people worldwide, or approximately 25% of the global population. According to Market Scope, the worldwide presbyopic population is expected to grow to approximately 2.1 billion people by the end of 2020. The global market opportunity for surgical treatment of presbyopia is large and growing due to the aging of the population. Globally, the median age is projected to increase from 29 years in 2011 to 38 years by 2050. Consistent with the expected growth in the worldwide presbyopic population, according to Market Scope, the annual number of presbyopia-correcting surgeries performed globally is expected to increase from approximately 625,000 procedures in 2014 to approximately 1.2 million procedures by 2019. According to Market Scope, corneal inlays are projected to be the fastest growing segment of this market and are expected to grow from approximately 18,000 procedures in 2014 to approximately 204,000 procedures in 2019. In addition, according to Market Scope, spending on devices, equipment and procedure fees for presbyopia-correcting surgery is expected to increase from approximately $408 million in 2014 to approximately $750 million in 2019 at the manufacturer level. We do not have marketing approval in many jurisdictions included in the foregoing global data, which jurisdictions collectively represent a majority of the worldwide presbyopic population. We have marketing approval in a number of strategic countries that we are targeting for commercialization and we are actively seeking marketing approval in certain other strategic countries that we are targeting for commercialization, including the United States.

Approaches for Treating Presbyopia

Although reading glasses and contact lenses have historically been, and remain, the most common solution for presbyopia, there are significant drawbacks associated with these non-surgical approaches. Eyeglasses can easily be lost, misplaced, broken or scratched and require frequent cleaning. Also, many people wish to avoid the inconvenience of keeping reading glasses close at hand. Contact lenses require daily insertion, removal and maintenance, which can be problematic for an increasingly mobile population and for people living and working in dusty environments or in unsanitary conditions.

There are presently four surgical correction categories for treating presbyopia:

Monovision . Monovision treatments correct one eye, typically the dominant eye, for distance vision and correct the other, non-dominant eye for near vision. While monovision may be accomplished through the use of glasses with two different lenses with varying thickness, that approach can cause bothersome symptoms when a person looks through the edges of the glasses. A more typical approach to monovision is the use of two different contact lenses. A more permanent monovision approach is to undergo laser or IOL-based refractive surgeries adapted for presbyopia correction. A significant drawback of monovision surgical treatments is the complexity of achieving additional correction, if vision further deteriorates. Additional drawbacks include occasional patient adaptation issues, whereby patients have difficulty adjusting to the monovision arrangement and suffer from blurring of vision, difficulty driving at night and loss of stereopsis, or the ability to focus upon an object with both eyes and create a single stereoscopic image.

Multifocal . Multifocal approaches are designed to provide both distance and near focus at the same time in each eye. Generally, both depth perception, or the ability to judge the distance of an object, and contrast sensitivity, or the ability to detect detail having subtle color gradations, are generally improved when two eyes can focus on an object. In addition, these approaches are intended to be improvements over constantly taking glasses off and putting them back on (possibly by wearing glasses around the neck) or by using bifocal or varifocal glasses or contact lenses, in which the eye is trained to look through the top part for distance vision and the bottom part for near vision. Multifocal effects can be achieved by lens replacement, including multifocal IOLs (IOLs with different zones of varying power), or through the creation of a multifocal cornea using laser refractive surgery (to create two or more refractive zones on the central cornea) or intrastromal ablation (laser used to make small changes in the thickness of the cornea). As with monovision, a significant drawback of these multifocal approaches is the complexity of achieving additional correction, if vision further deteriorates. In addition, some patients may experience halos, or rings around lights, at night, and it may also take time for multifocal patients to adapt to the different focal areas.

Restoring Accommodation . Accommodating approaches generally attempt to replace the natural lens with an accommodating IOL, which is an artificial lens that is designed to mimic the movement of the natural crystalline lens of the eye. All IOL-based surgeries are susceptible to opacification, or clouding, of the lens capsule, which is the part of the natural lens covering that remains after surgery, decreasing vision and requiring a laser procedure to cut a hole in the clouded back lining of the lens capsule to allow light to pass through the membrane to the retina. Accommodating IOLs are also subject to certain other complications pertaining to the shrinkage, closure or clouding of the capsule that can reduce the mode of action of the accommodating IOLs, rendering them less effective. Other less common accommodating techniques include lens softening and scleral relaxation techniques, which are designed to improve near vision by restoring the function of the eye’s own accommodative system. Lens-softening techniques use pharmaceuticals or lasers to soften or change the structure of the natural crystalline lens, allowing it to flex better to increase accommodation. Scleral relaxation techniques use implants in the sclera of the eye to increase the eye’s ability to focus at near distances. To date, these procedures have had little documented success.

5


 

Corneal Inlays . Corneal inlays include miniature surgically implanted lenses (such as our microlens), optical devices inserted into the cornea to reshape the front surf ace of the eye, and small implants to reduce the size of the opening into the eye to reset the angle of the light rays entering the eye and reduce both the number of rays and the light scatter, each of which is designed to improve near vision.

Our Solution

We have designed our microlens to address certain limitations of other surgical approaches to treat presbyopia. The critical aspects of our solution include:

 

·

Effective Treatment Option for Plano Presbyopes . The largest sub-group of the presbyopic population is plano presbyopes, or those individuals without significant refractive error who suffer from presbyopia. Plano presbyopes account for approximately 38% of the total presbyopic population. We believe that ophthalmologists are generally reluctant to recommend a LASIK or IOL procedure as a solution for a plano presbyope given the inherent risks and visual compromises of such procedures. Because our procedure does not involve the removal of the natural lens, the reshaping of the cornea or the removal of corneal tissue, we believe that ophthalmologists will be more likely to recommend our microlens as a solution for plano presbyopes than a LASIK or IOL procedure.

 

·

Complementary Solution . In addition to being a treatment option for plano presbyopes, we believe that our solution can be used in conjunction with other surgical procedures that treat vision disorders other than presbyopia, including LASIK procedures for near and/or distance vision correction and the implantation of traditional monofocal IOLs used to treat cataracts. In addition, we believe that our microlens can be used to treat presbyopia in certain post-LASIK and post-cataract surgery patients.

 

·

Minimally Invasive . Our microlens is implanted in a pocket in the cornea created with a femtosecond laser. The pocket seals itself within a few days, holding the lens in place. The procedure does not require the reshaping of the cornea and no corneal tissue is removed. Moreover, the nature of our solution permits normal nutrient flow to the cornea, enabling corneal metabolism. As a result, there is less potential for dry-eye symptoms and less damage to the collagen fibers that support corneal shape and structure.

 

·

Removable . We have designed our microlens and procedure to be easily removable. We believe that designing a lens that is removable gives patients the ease of mind of knowing that if they are uncomfortable with the results, or if technological advances produce different solutions in the future, they have not taken a step that prevents them from being able to undergo future procedures. The design of our microlens will also permit removal in the event that a patient’s presbyopia significantly progresses with age and the patient wishes to have a lens with additional diopter power implanted. We believe that by designing our microlens and procedure in a manner that allows our microlens to easily be replaced, ophthalmic surgeons will be able to choose the lens most appropriate for a given patient as the patient ages and the patient’s presbyopia progresses. In the United States, our IDE does not permit replacement of a microlens in the event that a patient’s microlens is removed after implantation. Also, in the United States, our IDE requires any removal of the microlens to be reported as an adverse event.

 

·

Correction Options . The range of optical power corrections available in our microlens allows the ophthalmic surgeon to choose the correction most appropriate for the patient’s specific near vision requirements, as opposed to a unilateral “one size fits all” approach.

 

·

Invisible . The clear nature of our microlens renders it invisible to the naked eye which we believe will make it appealing to patients.

 

·

Does Not Hinder Certain Other Procedures . Our microlens does not hinder examination of the retina and other structures in the eye necessary to diagnose other ocular health disorders.

 

·

Minimal Side Effects . In the limited number of procedures performed to date outside of the United States and the limited number of procedures performed as part of our U.S. staged pivotal clinical trial, healing and adaptation to the microlens generally begin immediately after the surgery, with the immediate common side effects of such a procedure generally being mild eye dryness and irritation, transient elevated intraocular pressure due to standard post-surgery medication regimen, corneal haze (the activation of inflammatory cells in connection with surgery), transient light sensitivity (an abnormal occurrence of photosensitivity associated with the femtosecond laser) and certain visual symptoms, such as halos or glare.

We believe that surgical treatment for presbyopia represents a large new market opportunity for ophthalmic surgeons. The market for traditional surgical ophthalmic treatments, such as LASIK for myopia, hyperopia and astigmatism, and traditional monofocal IOLs for cataracts, is highly mature. Our procedure utilizes the femtosecond laser currently used for certain LASIK surgeries, cataract surgeries

6


 

and cornea replacement surgeries. We believe that many refractive laser centers equipped with such lasers are not operating at full capacity, and we hope to utilize suc h untapped capacity. Our procedure would allow these laser centers and ophthalmic surgeons to introduce a new treatment modality using their existing laser equipment, adding incremental revenue without the need for significant new capital commitments.

We believe that patient demand for our microlens may be driven in part by the large and growing number of individuals who have become comfortable with and undergone LASIK procedures, which we believe have lost their “experimental” reputation. We expect that these individuals are more likely to be early adopters of our microlens solution to the extent they require additional vision correction in connection with the onset of presbyopia. We believe demand is likely to be fueled further by the ever-evolving, near-vision needs resulting from the increasing reliance on smart phones, tablets and other technological advances requiring good near vision.

Our Technology

Our microlens is a disc shaped lens that has a refractive zone in the periphery designed to improve near vision problems associated with presbyopia and a central zone that is designed to improve distance vision. The two figures below illustrate the design of our microlens.

Our microlens is 3.2 millimeters (mm) in diameter, has an edge thickness of 0.015 mm and has a center thickness that ranges from approximately 0.03 mm to 0.05 mm (depending on the lens power). Once implanted, it is invisible to the naked eye. Our microlens is made of a hydrophilic acrylic material, similar to the kind that has been used to make IOLs for over 20 years. Our microlens is designed to be removable. In addition, our microlens is designed to reduce the risk of permanent corneal tissue loss and is designed to be biocompatible with the cornea, allowing for corneal metabolism, which is essential to the health and normal functioning of the cornea.

Ocular dominance is the tendency to prefer visual input from one eye to the other. Our microlens is implanted in a patient’s non-dominant eye to minimize impact to binocular uncorrected distance vision. Through implantation in the patient’s non-dominant eye, our solution seeks to exploit the brain’s ability to perceptually suppress central vision in one eye when the two eyes are receiving disparate stimuli and focus on the clearer images while ignoring the blurrier images. Prior to implantation, we require patients to wear

7


 

a contact lens for near vision correction in their non-dominant eye for a minimum of three to five days before insertion of our microlens in order to assess whether or not the patient is able to adapt to the change in the visual system. Not all prospective patients are able to adapt to the change in the visual system. Based on feedback that we have received from surgeons to date, we believe that approximately 40% of prospec tive patients who underwent monofocal contact lens correction in their non-dominant eye were unable to adapt to the change in the visual system and approximately 25% of prospective patients who underwent multifocal contact lens correction in their non-domi nant eye were unable to adapt to the change in the visual system.

To improve near vision, as shown below, the refractive peripheral portion of our microlens is designed to help focus light from near objects (darker shaded light) onto the retina.

Near Vision with Microlens

To improve maximum distance vision, the central refractive portion of our microlens is designed to permit light from distant objects to pass through the cornea and lens and focus on the retina (lighter shaded light shown below). The refractive peripheral portion of the lens causes some distant light rays to focus in front of the retina, instead of on it (darker shaded light shown below). However, when the brain receives dual visual stimulus from the corrected non-dominant eye, as well as the uncorrected dominant eye, it is able to correctly combine the information into an image for the patient.

Distance Vision with Microlens

Insertion of our Microlens

Our microlens is surgically implanted, using our proprietary microlens inserter, in an outpatient setting. The procedure, requiring only topical anesthesia, typically takes a trained ophthalmic surgeon approximately 10 minutes. The procedure and equipment needed to create a corneal pocket to insert the microlens are similar to those currently used in LASIK procedures. We believe that the existing infrastructure in most refractive laser centers equipped with femtosecond lasers is sufficient for our procedure.

8


 

The figures below illustrate our microlens inserter and the insertion of our microlen s.

 

Illustration of our

Proprietary Insertion Tool

 

Illustration of Insertion of

Our Microlens

 

The ophthalmic surgeon starts the procedure by making a mark on the cornea at the center of the visual axes in order to determine the most appropriate location of the corneal pocket as well as the microlens placement and alignment once in place. Then, using a 150 kilohertz or greater frequency femtosecond laser, the ophthalmic surgeon creates a pocket, approximately four to 5.5 mm in diameter, in the cornea of the patient’s non-dominant eye. Using our microlens inserter, the ophthalmic surgeon then inserts our microlens into the corneal pocket. Finally, the ophthalmic surgeon centers and checks the position of the implanted microlens before completing the surgery. The corneal pocket automatically seals itself within a few days, holding the microlens in place at the center of the eye’s visual axis.

We have designed our microlens and procedure to be removable in a minimally invasive manner in the event that a patient wishes to have a stronger prescription microlens implanted. This may occur if a patient’s presbyopia significantly progresses over time or in the event that a patient wishes to have the microlens removed for any other reason, including if the patient is uncomfortable with the results, if neural adaptation is not achieved, or if technological advances produce alternative solutions in the future. In the United States, our IDE does not permit replacement of a microlens in the event that a patient’s microlens is removed after implantation. Also, in the United States, our IDE requires any removal of the microlens to be reported as an adverse event.

The procedure to remove our microlens may take place in an outpatient setting, using only topical anesthesia. The removal procedure consists of opening the corneal pocket entry point and, using a fluid to lubricate the pocket of the lens, sliding the lens from the corneal pocket. This procedure typically takes a trained ophthalmic surgeon approximately 10 minutes. A new microlens can be immediately inserted into a patient’s existing corneal pocket.

Through February 15, 2016, ophthalmic surgeons have implanted over 1,000 of our microlenses.

9


 

Clinical Studies

We have completed a multicenter clinical study outside the United States. In addition, several third parties have conducted limited studies of our microlens. These studies are summarized below.

Evaluation Conducted Outside of the United States

In early 2012, we completed a 12-month multicenter, post-market evaluation in Italy and Greece of our microlens in presbyopic patients between the ages of 45 and 60 to evaluate the safety and effectiveness of our microlens. We designed, and oversaw the implementation of, the protocol for this evaluation, which was conducted at our request by a surgeon at the Vardinoyannion Eye Institute at the University of Crete in Crete, Greece and by a surgeon at Prato Hospital in Prato, Italy. The 12-month data for the 70 patients who completed the study demonstrated successful patient outcomes and a low rate of post-operative adverse events. The average UCVA-near in the operated eye pre-surgery for those 70 patients was 20/110 and 99% of those patients started the study with UCVA-near in the operated eye of 20/50 or worse. Key effectiveness findings from this evaluation included the following:

 

·

the average UCVA-near in the operated eye for such patients post-surgery was 20/27, 99% of such patients completed the study with 20/40 or better UCVA-near in the operated eye and 70% of such patients completed the study with 20/25 or better UCVA-near in the operated eye (see Figure 1 below);

 

·

although there was a slight loss in uncorrected distance visual acuity (the ability to see distant objects without prescription enhancement), or UCVA-distance, in the operated eye (see Figure 4 below), there was no significant change in binocular UCVA-distance (UCVA-distance when using both eyes) from before treatment to after treatment in this study (see Figure 2 below); and

 

·

there was no significant change in best corrected distance visual acuity (distance vision using prescription enhancement), or BCVA-distance, in the operated eye after 12 months (see Figure 3 below).

A Snellen chart is an eye chart used by eye care professionals and others to measure visual acuity. It usually consists of letters printed in lines of decreasing size which a person is asked to read at a fixed distance. 20/20 is a term used to define normal visual acuity, which relates to the Snellen chart. The first number denotes a certain distance, and the second number denotes the distance at which a person with normal visual acuity could read clearly those letters that the subject of the assessment can read clearly at the distance denoted in the first number. The standard distance for testing distance visual acuity is 20 feet. Thus, with respect to distance vision, if an individual has 20/100 vision, it means that a person with normal distance vision can read at 100 feet what the patient can only read at 20 feet (poor distance vision). 20/10 vision, on the other hand, would mean the individual has better than normal distance vision, being able to read at 20 feet what a person with normal distance vision could only read at 10 feet. With respect to near vision, the 20/20 nomenclature is used with the distances in the first number and the second number scaled to the distance used in the study. Thus, an individual with 20/20 near vision means the patient can read clearly those letters at the distance tested (usually 40 centimeters (cm) in the United States and 33 cm outside of the United States) that a person with normal near visual acuity could read clearly at that distance. In our post-market evaluation, we tested visual acuity using an Early Treatment Diabetic Retinopathy Chart, or ETDRS, Snellen chart; the distance used to test distance visual acuity was 20 feet and the distance used to test near visual acuity was 33 cm.

10


 

An important measurement is the number of patients who reach better visual acuity levels, or visual correction, after treatment. Before surgery, the 70 patients who completed the study had an average UCVA-near in the eye to be operat ed on of 20/110 and 99% of such patients started the study with UCVA-near measurements of 20/50 or worse in that eye. After treatment with our microlens, such patients had an average UCVA-near in the operated eye of 20/27 and 99% of such patients achieved UCVA-near measurements of 20/40 or better in the operated eye and 70% of such patients achieved UCVA-near measurements of 20/25 or better in the operated eye. The following chart summarizes the positive UCVA-near results in this post-market evaluation:

Figure 1

Uncorrected Near Visual Acuity Operated Eye (33 cm chart)

(N=70 at Month 12)

 

Another important measurement is the number of patients who maintain binocular UCVA-distance levels post-treatment. There was no significant change in binocular UCVA-distance from before treatment to after treatment in this study. This stability in binocular vision is important because it indicates that patients in the study did not experience a significant compromise in binocular UCVA-distance as a result of the insertion of our microlens, meaning that their normal binocular far vision was not compromised. The following chart summarizes the binocular UCVA-distance findings in this post-market evaluation:

Figure 2

Uncorrected Binocular Distance Visual Acuity

(N=70 at Month 12)

 

11


 

In addition, patients in this study experienced no significant change in BCVA-distance in the operated eye at 12 months post-implantation, which indicates that there was no compromise in the operated eye’s optical system at 12 months. The following chart summarizes BCVA-distance findings with respect to the patient’s operated eye in this post-market evaluation:

Figure 3

Best Corrected Distance Vision Acuity Operated Eye

(N=70 at Month 12)

 

12


 

There was a slight loss of UCVA-distance in the operated eye in the study population. Before surgery, 83% of patients achieved UCVA-distance in the operated eye of 20/16 to 20/25 and 17% achieved UCVA-distance in the operated eye of 20/30 to 20/40. After t reatment with our microlens, 17% of patients achieved UCVA-distance in the operated eye of 20/16 to 20/25, 53% achieved UCVA-distance in the operated eye of 20/30 to 20/40, and 30% achieved UCVA-distance in the operated eye of 20/50 or worse. Although, as mentioned above, there was no significant change in binocular UCVA-distance from before treatment to after treatment in this study, far distance vision in the operated eye is also important, particularly as it relates to overall patient satisfaction. In th e study population, 78% of patients who responded reported that they perceived their UCVA-distance in the operated eye as “excellent” to “good.” This generally correlates to the data at month 12, where 70% of patients achieved 20/40 vision or better in the operated eye. The remaining 30% of patients achieved UCVA-distance in the operated eye of 20/50 or worse, and consistent with such results, 20% of patients who responded reported that they perceived their UCVA-distance in the operated eye as “fair.” One p atient who responded considered his outcome with respect to UCVA-distance in the operated eye as “poor.” The following chart summarizes UCVA-distance findings with respect to the patient’s operated eye in this post-market evaluation:

Figure 4

Uncorrected Distance Visual Acuity Operated Eye

(N=70 at Month 12)

 

There are several possible explanations for the loss of distance visual acuity in the operated eye, including, but not limited to the following:

 

·

the time required for neural adaptation, or the time it takes the brain to adapt to the change in the visual system;

 

·

improper patient selection, or the selection of patients who are intolerant of monovision, impatient or not willing to wait for the neural adaptation time period; and

 

·

improper lens power selection, meaning the patient is difficult to refract.

13


 

A subset of 39 patients enrolled in this evaluation underwent a monovision simulation, whereby pre-surgery UCVA-distance in the eye to be operated on with near vision contact lens correction in place was co mpared to UCVA-distance in the operated eye following implantation of our microlens. The purpose of this simulation was to evaluate whether UCVA-distance in the operated eye following implantation of our microlens is better than pre-surgery UCVA-distance i n such eye with the use of a near vision correction contact lens. These patients were found to have an average UCVA-distance in the operated eye of 20/43 12 months post-surgery, while the same patients pre-surgery had an average UCVA-distance in the eye wi th near vision contact lens correction of 20/139. We believe that this result is due to the nature of the design of our microlens which is intended to maintain distance vision in the operated eye to the greatest extent possible. The central portion of our microlens is designed to allow for light from distant objects to enter the eye and focus on the retina, and the retina ultimately transmits that image to the brain. Figure 5 below illustrates the findings in this evaluation with respect to post-surgery UCV A-distance in the operated eye compared to pre-surgery UCVA-distance in the eye to be operated upon with near vision contact lens correction in place:

Figure 5

 

Overall, patient satisfaction with the procedure was generally high. 97% of patients who responded reported “excellent” or “good” perception of UCVA-near, and 97% of patients who responded reported “excellent” or “good” perception of binocular UCVA-distance. 75% of patients who responded reported no use of glasses for near tasks while the remaining 25% reported use of glasses less than 50% of the time. 78% of patients who responded indicated that they used glasses for near tasks more than 50% of the time prior to implantation.

Key safety findings from the evaluation over a 12-month period included the following:

 

·

low rate of post-operative adverse events;

 

·

one patient complained one week after implantation of significant halos and glare when driving at night and requested removal of the microlens (the lens was removed one month post-surgery);

 

·

one case of transient light sensitivity syndrome was reported: this represents an abnormal occurrence of photosensitivity associated with the femtosecond laser, which resolved after application of a topical steroid regimen;

 

·

one case of epithelial ingrowth was reported: this represents an abnormal growth of corneal epithelium in an area where it does not belong, associated with the femtosecond laser, which resolved after the ingrowth was surgically cleared; and

 

·

four cases of transient stromal haze were reported: these cases involved the activation of inflammatory cells in connection with surgery, which resolved after application of a topical steroid regimen.

There was no significant change in:

 

·

intraocular pressure, or the fluid pressure in the eye;

 

·

endothelial cell density, or the tissue layer undersurface of the cornea and which regulates corneal water content;

14


 

 

·

pachymetry, or the measure of corneal thickness; or  

 

·

binocular contrast sensitivity.

We continue to evaluate our microlens through clinical studies and marketing and post-marketing evaluations in connection with regulatory requirements and our commercialization efforts. In addition, through February 15, 2016, ophthalmic surgeons have implanted over 1,000 of our microlenses.

Third Party Studies

Our microlens has been the subject of certain third party studies that have been conducted to assess the efficacy and safety of our microlens. We did not commission these studies or design, review or oversee the implementation of their protocols (although we paid the annual fees of the institutional review board, or IRB, reviewing one such study in Japan), and we have limited information with respect to these studies. These studies have reported certain adverse effects relating to the safety and efficacy of our microlens and microlens inserter. In connection with the findings in certain of such studies and observations of other surgeons regarding our procedure, we have undertaken certain investigative actions as part of our ongoing risk mitigation efforts. See “Risk Factors—Risks Related to Our Business—If concerns regarding side effects from presbyopia-correcting surgery generally, or our products specifically, develop, including as a result of third-party studies and publications, our business, results of operations and financial condition will be materially and adversely affected.”

U.S. Staged Pivotal Clinical Trial

In May 2014, we began a staged pivotal clinical trial to seek marketing approval for our microlens and microlens inserter in the United States. See “—Clinical Development and Commercialization Targets” below for a description of this study. For a description of adverse events to date in this study, see “Risk Factors—Risks Related to Our Business—If concerns regarding side effects from presbyopia-correcting surgery generally, or our products specifically, develop, including as a result of third-party studies and publications, our business, results of operations and financial condition will be materially and adversely affected.”

Upgraded Microlens Inserter

We completed development of a disposable non-sterile microlens inserter in the fourth quarter of 2015. This product is designed to be used only one time, making the insertion process easier and quicker for surgeons. This device is currently available and in compliance in the European Union and many other countries. We have completed and selected a lens delivery assembly. We designed a preloaded inserter and are conducting a preliminary testing and evaluation. Once evaluation is completed, the packaging system for the lens delivery assembly, including the lens, will be finalized. We expect that authorization to market these products in the United States will require submission of a 510(k).

Clinical Development and Commercialization Targets

In December 2013, we received approval from the FDA to commence a staged pivotal clinical trial of our microlens in the United States. This clinical trial is a prospective, non-randomized, unmasked, multicenter clinical investigation. Beginning in May 2014, we enrolled a total of 75 subjects at six investigational sites in the United States. Beginning in June 2014, each of these subjects underwent insertion of our microlens in the subject’s non-dominant eye. Based on six-month data on 52 of these subjects, in January 2015, we submitted to the FDA an interim safety report as a supplement to our IDE. In February 2015, we received approval from the FDA to commence second stage enrollment in this trial. Through February 15, 2016, 346 subjects underwent insertion of our microlens in the second stage of this study. We currently anticipate that in order to file our PMA we will need 24-month post-surgery data on each of at least 300 patients. All subjects will be followed for three years following implantation. Subjects from outside the United States will not be enrolled in this study. The primary endpoint will be UCVA-near at 24 months post- implantation, together with safety objectives such as a low rate of ocular adverse events, endothelial cell loss over time in the operated eye, and an assessment of BCVA-distance and contrast sensitivity in the operated eye (the visual ability, with distance vision correction in place, to see objects that may not be outlined clearly or that do not stand out from their background). Although our microlens is designed to be removable, our IDE requires any removal to be reported as an adverse event. We are pursuing a modular PMA submission strategy, which strategy was approved by the FDA in January 2016, whereby we intend to submit to the FDA information regarding biocompatibility, engineering, manufacturing and 2 years of clinical data in the second (biocompatibility module) and fourth quarter (engineering module) of 2016 . We are targeting submission of the third (manufacturing) PMA module in the first quarter of 2017 and our final PMA module, containing 24-month data on 300 subjects, to the FDA, in the fourth quarter of 2017.We are targeting PMA approval of our microlens in the fourth quarter of 2018. We are also targeting submission to the FDA of a final report with 36-month data on these 300 subjects in the fourth quarter of 2018. These milestones could be delayed by further interactions with the FDA or by a variety of other factors, including the final design of the study that is approved by the FDA, and are subject to risks and

15


 

uncertainties. There can be no assurance that the FDA will grant our PMA approval or, if granted, that it will be granted in accordance with our anticipated time schedule. In addition, the FDA may require us to conduct post-approval studies as a condition of approval.

We plan to continue to work closely with refractive laser centers and hospitals in order to secure commercialization commitments in those countries in which we currently have marketing approval that we are targeting for commercialization. In addition, we plan to continue to seek marketing approval in additional countries that we determine present appropriate opportunities to commercialize our microlens and microlens inserter.

Strategy

Our goal is to become the leading provider of corneal lens implants for patients with presbyopia. We are currently commercializing our microlens internationally in select countries. In December 2013, we gained approval to begin a staged pivotal clinical trial in order to seek marketing approval for our microlens in the United States. We completed the first stage of this study in July 2014, and submitted to the FDA an interim safety report on 52 subjects in January 2015. In February 2015, we received approval from the FDA to commence second stage enrollment in this trial. At that time we began enrollment of an additional 337 patients for our second stage enrollment. We completed second stage enrollment in September 2015.

We believe that most presbyopic individuals are not aware of procedures intended to decrease their dependence on reading glasses, the traditional solution for presbyopia, and therefore do not seek treatment from an ophthalmic professional.

We believe that refractive surgery center operators, impacted by sharp declines in LASIK procedure volumes, are searching for new technologies that can be used in elective (patient-pay) procedures to grow revenues. We believe that these centers have existing infrastructure (femtosecond lasers) and databases of patients who may be eligible for these presbyopia procedures. We believe that a significant opportunity rests in the population of presbyopic individuals who are unaware of these new treatment options. Our entry strategy is to identify refractive laser surgery centers and to certify the surgeons in these centers to enable them to commercially offer the Presbia microlens procedure.

Once a surgeon is certified, the Presbia commercial and clinical team will provide comprehensive training to all surgeons and staff, and assist with the identification of potential patients, which is intended to drive demand to the clinic for our microlens procedure. We intend to offer public relations activities and co-op marketing programs to assist the clinic in generating prospective patient leads to stimulate commercial demand for the procedure.

The surgeon goes through a comprehensive training and certification program, which includes didactic sessions, wet-lab training, and surgery performed with members of our surgical training team present during the certification process. Thereafter, patients are seen at regular intervals, and individual patient results are collected. These data are then analyzed by our clinical services team to ensure proper patient selection was achieved, that patient expectations were managed appropriately, and that patients achieve optimal visual outcomes. Once the surgeon is certified, our goal is for the practice to continue to grow its business, using the tools and methods provided by our commercialization team. We have utilized this model in certain jurisdictions, including Ireland, which resulted in adoption of our technology into the practice. Implementation of the process is designed to yield the best possible patient selection, which in turn is designed to lead to the highest possible patient satisfaction.

We currently have an arrangement with laser centers in Ireland, Australia, the Netherlands and South Korea (and Canada as permitted under Canada’s Special Access Program) whereby the laser clinic or a country-wide distributor has committed to help promote our microlens in the applicable jurisdiction.

We are deploying a targeted approach to commercial market expansion. We have selected key countries for expansion based upon several criteria including: large number of lasers, large number of laser centers, large number of refractive surgeons, high incidence of presbyopia and strong household income. We have selected South Korea to be our hub in the Asia Pacific region and Germany in the European region. We are currently focusing our strategies on South Korea. Over the course of the next year we intend to expand into Germany.

U.S. Staged Pivotal Clinical Trial

Gaining approval to market our products in the United States is a critical element in our strategy. In order to obtain such approval, we must obtain a PMA from the FDA. We cannot assure you when or whether we will obtain such an approval, or what expenditures we will incur whether or not we obtain such approval, given the many significant risks associated with seeking such an approval from the FDA.

16


 

International Commercialization

Through our European Union CE Mark, we are generally authorized to market our microlens throughout the EEA and Switzerland (certain EEA countries also require additional in-country registration). We currently market our microlens in certain strategic EEA countries, as well as certain strategic non-EEA countries in which we currently possess marketing approval. We will continue to seek marketing approval in other strategic countries that we believe are appropriate to further our commercialization strategy.

Sales & Marketing

Sales and marketing for our microlens is led by our vice president of sales and dedicated business development directors or managers, our clinical services director, clinical application specialists and surgical trainers. They are supported in the process by our corporate marketing team.

We believe the existing infrastructure in most refractive laser centers equipped with a 150 kilohertz or greater femtosecond laser is sufficient to support our commercialization efforts, minimizing the need to establish a significant sales representative structure at this juncture in our development. We intend to utilize a direct selling structure unless a country requires us to sell through a distributor, agent or we determine that a distributor/agent will offer us a more effective path to commercialization.

We also intend to sponsor ophthalmic surgeons to speak and present data at numerous conferences throughout Asia, Europe, Latin America and the United States. We believe this marketing strategy will help promote our microlens and increase demand from both clinicians and patients worldwide.

Our microlens and the procedure to implant our microlens are not currently reimbursed through private or governmental third-party payors in any country, nor do we anticipate that our microlens and the procedure to implant our microlens will be reimbursable through private or governmental third-party payors in the foreseeable future. Although the commercialization of our microlens depends on a prospective patient’s ability to cover the costs of our microlens and the implantation procedure and we believe that a substantial portion of presbyopes worldwide do not have the financial means to cover the costs of our microlens, we believe that a direct patient-pay model enables medical providers to avoid pricing pressure from private or governmental third-party payors. We do not have control over the prices that medical providers charge patients for our microlens and the implantation procedure.

Research and Development

We believe that it is essential for us to remain focused on advancing our technology and continuing to improve our microlens, as well as our microlens inserter and other auxiliary Presbia products. We maintain an active internal research and development process, which also includes clinical activities and regulatory affairs. In order to achieve our business objectives, we will continue our investment in research and development. Our research and development team, consisting of nine persons as of December 31, 2015, communicates with ophthalmic surgeons who are currently utilizing the Presbia system, enabling us to make design changes as we receive feedback. Over the last three years, we have made a number of modifications to our microlens inserter to enable ophthalmic surgeons to more quickly and efficiently remove our microlens from its sealed container and prepare it for insertion into the laser-cut corneal pocket.

Over the next 12 months, our goal is to continue our focus on research and development, particularly with respect to completing the development of a sterilized disposable microlens inserter and a pre-loaded disposable microlens inserter for our microlens. Additionally, as we regard our microlens to be an optical platform, we will continue to explore new approaches to correct vision problems, including evaluating the development of a corneal inlay for the treatment of hyperopia. We expended $7.9 million and $4.2 million for research and development during the years ended December 31, 2015 and December 31, 2014, respectively.

Intellectual Property

Our commercial success depends, in part, on our ability to obtain and maintain proprietary protection for our products, technologies and other know-how, to operate without infringing the proprietary rights of others and to prevent others from infringing our proprietary rights. We strive to protect our investment in the research, development, manufacturing and marketing of our products through the use of patents, trademarks, copyrights and trade secrets, as well as customary confidentiality and other contractual protections. We own, or have rights to, several patents, several patent applications, trademarks, copyrights, trade secrets and other intellectual property directly related and important to our business. However, the extent to which our intellectual property will provide us with protection and enable us to commercialize our proprietary technology without interference from others is subject to numerous risks. See “Risk Factors—Risk Relating to Our Intellectual Property.”

17


 

Patents

We currently own six issued US patents, and four pending U.S. patent applications, all of which we consider material to our business. Three of our existing patents relate to our microlens inserter and corresponding methods of use; these patents expire in 2030 or 2031.  Two additional patents relate to the method and apparatus to package and transport our microlens and making it readily accessible; these patents expire in 2030. The other patent relates to a method that can be used by a laser to cut a pocket in the cornea and insert the microlens; this patent expires in 2028. Our four pending applications relate to a method and apparatus to package and transport our microlens, to an extension of the method for laser cutting a corneal pocket to insert our microlens, to the apparatus and method to use a preloaded inserter to insert our microlens, and to our proprietary data collection software.  In addition, we have a PCT application relating to a lens inserter assembly for which we anticipate entering the U.S. National Stage Application and filing several foreign counterparts before May 2016.

Additionally, we have a total of thirty-three foreign patent applications, twenty-seven of which are still pending in Australia, Brazil, Canada, China, Europe, Israel, Hong Kong, India, Japan, Korea and Russia. The foreign applications correspond to the content of the six issued U.S. patents. We currently own a patent in Canada, which corresponds to the U.S. patent which covers the method and apparatus to insert our microlens, and we have granted applications in Israel and China which correspond to the same U.S. patent. We also own patents in Japan and Australia, which corresponds to the U.S. patent which covers the microlens inserter.

Our patents and patent applications may allow us to exclude others from practicing our proprietary inventions and may provide us with an opportunity to obtain royalties or cross-licenses of intellectual property from other manufacturers. Because we have limited knowledge of the research and development efforts and strategic plans of our competitors, we can only estimate the value of our patents and patent applications. Competitors may be able to design products and/or processes that avoid infringing our patent portfolio as it may exist from time to time.

Trademarks

Worldwide, we have several registered trademarks and pending trademark applications that we consider to be important to our business. The scope and duration of trademark protection varies widely throughout the world. In some countries, trademark protection continues only as long as the mark is used. Other countries require registration of trademarks and the payment of registration fees. Trademark registrations are generally for fixed but renewable terms.

Confidentiality Agreements

We protect our proprietary technology, in part, through confidentiality and nondisclosure agreements with employees, consultants and other parties. Our confidentiality agreements with employees and consultants generally contain standard provisions requiring those individuals to assign to Presbia, without additional consideration, inventions conceived or reduced to practice by them while employed or retained by Presbia, subject to customary exceptions.

Competition

The medical device industry in general, and the ophthalmic medical device market in particular, are highly competitive, subject to rapid technological change and significantly affected by new product introductions and market activities of other participants. Our currently marketed products are, and any future products we commercialize will be, subject to intense competition.

We expect to compete against companies that are developing corneal inlay surgical solutions for presbyopia, including AcuFocus, Inc., ReVision Optics, Inc., Neoptics AG and LensGen, Inc. AcuFocus, Inc.’s corneal inlay approach attempts to use small aperture optics to reduce distortion by eliminating peripheral light rays and limiting the width of diverging light rays. ReVision Optics, Inc.’s corneal inlay approach attempts to produce a smooth variation in focal power across the pupil by microscopically altering the surface shape of the cornea. Neoptics AG’s corneal inlay approach consists of a bifocal lens with a peripheral zone designed to improve near vision and a central zone for distance vision. LensGen, Inc. is a newer company with little publicly available information regarding its intraocular lens which is being designed to harness fluidics and displacement to manipulate curvature to better capture light. Both AcuFocus, Inc. and ReVision Optics, Inc. have been conducting clinical trials in the United States for years and have more experience than Presbia in conducting such trials. AcuFocus, Inc. has completed a pivotal clinical trial in the United States and received  FDA approval in April 2015.. Also, both AcuFocus, Inc. and ReVision Optics, Inc., like Presbia, have marketing approval in certain jurisdictions outside the United States, including the EEA, and can be expected to compete with Presbia in such jurisdictions. We believe that AcuFocus, Inc. may have more commercial activities to date than Presbia in certain jurisdictions, including Japan. We do not believe that Neoptics AG has approval in the U.S. to conduct clinical trials or marketing approval in any jurisdiction. In addition to being an effective treatment option for presbyopia, we believe that our microlens is less invasive than ReVision’s Optics, Inc.’s corneal inlay, offers a range of optical power corrections not offered by ReVision’s Optics, Inc.’s corneal inlay or AcuFocus, Inc.’s

18


 

co rneal inlay, is less conspicuous than AcuFocus, Inc.’s corneal inlay and is more easily removable than ReVision Optics, Inc.’s corneal inlay.

In June 2014, the FDA released data presented by AcuFocus to the FDA in its PMA submission with respect to its KAMRA device. The data related to a study conducted by AcuFocus with respect to 508 subjects (of which the FDA determined that there were 494 evaluable subjects). We reviewed that data against the data that we compiled from the post-market surveillance study that we conducted in Italy and Greece in 2012 with respect to 70 patients who underwent implantation of our microlens. For further information regarding this post-market evaluation, see “—Our Solution—Evaluation Conducted Outside of the United States.”

We note the following with respect to the AcuFocus study and our post-market surveillance study:

 

·

Approximately 80.8% of AcuFocus’ 494 evaluable subjects achieved UCVA-near of 20/40 or better in the operated eye 12 months postoperative, which was the primary efficacy endpoint of the AcuFocus study. As discussed in “—Our Solution—Clinical Studies—Evaluation Conducted Outside of the United States”, approximately 99% of the 70 patients in Presbia’s post-market surveillance study achieved UCVA-near of 20/40 or better in the operated eye 12 months postoperative.

 

·

Both the KAMRA, in AcuFocus’ study, and Presbia’s microlens, in Presbia’s post-market surveillance study, generally had minimal effect on a subject’s binocular distance vision.

 

·

Included among the adverse events in each study at 12 months postoperative, 3.0% of subjects experienced device explantations in AcuFocus’ study, and 1.4% of subjects experienced device explantations in Presbia’s post-market surveillance study.

We note that AcuFocus’ study includes a substantially larger sample size (number of patients that received the implant) than Presbia’s post-marketing evaluation and that comparability of the results of AcuFocus’ study and Presbia’s post-marketing evaluation could also be adversely affected by differences in patient demographics, such as gender and ethnicity, as well as differences in study protocols, site location and other conditions. We also note that we are currently conducting our U.S. staged pivotal clinical trial, and that trial might provide different results than those observed in our post-market evaluation described above and elsewhere in this Annual Report on Form 10-K.

We expect to compete against companies that offer alternative surgical treatment methodologies, including monovision, multifocal and accommodating approaches, and companies that promote reading glasses and/or contact lenses as approaches for responding to presbyopia. At any time, our known competitors and other potential market entrants may develop new devices or treatment alternatives that may compete directly with our products. In addition, they may gain a market advantage by developing and patenting competitive products or processes earlier than we can or by obtaining regulatory approvals/clearances or market registrations more rapidly than we can.

Certain of our current and potential competitors may have significantly greater financial, technical, marketing and other resources than we do and may be able to devote greater resources to the development, regulatory approval, promotion, sale and support of their products. Our competitors may also have more extensive customer bases and broader customer relationships than we do, including relationships with our potential customers. In addition, many of these companies have longer operating histories and greater brand recognition than we do. Because of the size of the presbyopia market and the high growth profile of that market, we anticipate that companies will dedicate significant resources to developing competing products. We believe that the principal competitive factors in our market include:

 

·

improved outcomes for patients and other product quality issues;

 

·

product innovation;

 

·

acceptance by ophthalmic surgeons;

 

·

ease of use and reliability;

 

·

regulatory status and speed to market;

 

·

product price and procedure price; and

 

·

reputation for technical leadership.

We cannot assure you that we will be able to compete effectively against our competitors in regard to any one or all of these factors.

19


 

Manufacturing

Our microlens is manufactured using hydrophilic acrylic material that has been utilized in the lens manufacturing market for the last 20 years. This material is well known and has an established safety profile. High precision lathing machines are used to generate sub-micro level accuracy of convex/concave radii. Like other traditional IOL manufacturing processes, the manufacturing of the microlens is divided into a dry and a wet process.

At present, our microlens is manufactured by a third-party original equipment manufacturer, or OEM, in Israel. This supplier has committed to a guaranteed minimum production level that we believe is adequate to meet our current needs. The agreement with this supplier is set to expire in January 2017. We expect that our Israeli OEM, or another supplier located overseas, will be utilized to satisfy all international demand for our microlens for the foreseeable future. We have also constructed a manufacturing facility in Irvine, California. We used our Irvine, California manufacturing plant to supply the microlens for our U.S. clinical study and believe that that facility is scalable to meet future U.S. demand once it has received all applicable regulatory registrations, approvals and certifications. Our U.S. facility has received regulatory approval from the State of California to manufacture our microlens for our U.S. staged pivotal trial. In addition, we have received the necessary regulatory approval to use such facility to provide backup manufacturing capacity for sales in the EEA, should such capacity be needed in the future. Our microlens inserter is manufactured by a third-party OEM in the United States, according to our specifications. Although we do not have a guaranteed supply commitment from this supplier, we believe that this supplier will be able to meet our foreseeable needs.

We believe that our current manufacturing arrangements are sufficient to support our foreseeable manufacturing needs. The manufacturing by the Israeli OEM includes in-house sterilization, packaging, and inventory. Inventory of our microlens is ultimately stored at our facilities in the Netherlands and Ireland.

Sources and Availability of Raw Materials

We use a wide range of raw materials in the production of our products. We purchase most of the raw materials and components from external suppliers. The hydrophilic acrylic material used to manufacture our microlens is supplied to us by a single supplier located in the United Kingdom . We would be required to obtain approval from the FDA in the event that we wished to use different material or similar material from a different supplier with respect to any products to be offered and sold in the United States. Although we do not have a guaranteed supply commitment from our sole supplier of such hydrophilic acrylic material, we believe that such supplier will be able to sufficiently meet our currently anticipated supply needs. Although we do not currently have any long-term agreements in place for the supply of any other raw materials that we use, such materials are currently readily available from a number of suppliers, both in the United States and abroad.

Government Regulation

Our medical device products are subject to extensive regulation by the FDA and various other federal, state and non-U.S. governmental authorities, such as the competent authorities of the countries of the EEA. Government regulation of medical devices is meant to assure their safety and effectiveness, and includes regulation of, among other things:

 

·

design, development and manufacturing;

 

·

testing, labeling, content and language of instructions for use and storage;

 

·

clinical trials;

 

·

product safety;

 

·

marketing, sales and distribution;

 

·

regulatory clearances and approvals, including premarket clearance and approval;

 

·

conformity assessment procedures;

 

·

product traceability and record keeping procedures;

 

·

advertising and promotion;

 

·

product complaints, complaint reporting, recalls and field safety corrective actions;

 

·

post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury;

20


 

 

·

post-market studies; and  

 

·

product import and export.

To market and sell our products in any country, we must first seek and obtain regulatory approvals, certifications or registrations and comply with the laws and regulations of that country. These laws and regulations, including the requirements for approvals, certifications or registrations and the time required for regulatory review, vary from country to country. Obtaining and maintaining regulatory approvals, certifications and/or registrations are expensive, and we cannot be certain that we will receive regulatory approvals, certifications and/or registrations in any country for which we have yet to receive such approvals, certifications and/ or registrations or that we will be able to maintain any regulatory approvals, certifications or registrations that we currently possess in any country. If we fail to obtain or maintain regulatory approvals, certifications or registrations in any country in which we currently market or plan to market our products or if we fail to comply with all applicable regulatory laws, rules and regulations, our ability to sell our products could be jeopardized and we could be subject to enforcement actions. See “Part I, Item 1a. Risk Factors—Risks Related to Regulatory Requirements” for a discussion of the risks and uncertainties that apply to Presbia in connection with government regulation of its products.

Regulatory Requirements in the United States

Under the U.S. Food, Drug and Cosmetic Act, or the FD&C Act, manufacturers of medical devices must comply with extensive regulation relating to the issues described above, including regulations governing the design, testing, manufacturing, packaging, quality, servicing and marketing of medical products. Our immediate focus is upon the steps that we must take before our products can be marketed and sold in the United States.

FDA’s Premarket Clearance and Approval Requirements

Unless an exemption applies, each medical device that is distributed commercially in the United States requires either prior 510(k) clearance or prior approval of a PMA application from the FDA. The FDA classifies medical devices into one of three classes. Devices deemed to pose low to moderate risk are placed in either Class I or II, which, absent an exemption, requires the manufacturer to submit to the FDA a premarket notification requesting permission for commercial distribution. This process is known as 510(k) clearance. Some low risk devices are exempt from this requirement. Devices deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices, or devices deemed not substantially equivalent to a previously cleared 510(k) device, are placed in Class III, requiring approval of a PMA application. Our Class III products/devices require prior approval of a PMA application from the FDA. Both premarket clearance and PMA applications are subject to the payment of user fees, paid at the time of submission for FDA review. The FDA can also impose restrictions on the sale, distribution or use of devices at the time of their clearance or approval, or subsequent to marketing.

Premarket Approval

A PMA application must be submitted if, as is the case with the microlens and our microlens inserter, the device cannot be cleared through the 510(k) process. The PMA application process is generally more costly and time consuming than the 510(k) process and requires proof of the safety and effectiveness of the device to the FDA’s satisfaction. Accordingly, a PMA application must be supported by extensive data including, but not limited to, technical information regarding device design and development, pre-clinical and clinical trials, data and labeling to support the FDA’s determination that the device is safe and effective for its intended use. After a PMA application is complete, the FDA will accept the application and begin an in-depth review of the submitted information. By statute, the FDA has 180 days to review the “accepted application,” although, generally, review of the application takes between one and three years, and may take significantly longer. During this review period, the FDA may request additional information and/or clarification of information already provided. Also, during the review period, an advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. In addition, the FDA will conduct a preapproval inspection of the manufacturing facility to ensure compliance with its Quality System Regulations, or QSRs, which impose elaborate design development, testing, control, documentation and other quality assurance procedures in the design and manufacturing process. The FDA may approve a PMA application with post-approval conditions intended to ensure the safety and effectiveness of the device, including, among other things, restrictions on labeling, promotion, sale and distribution and collection of long-term follow-up data from patients in the clinical study that supported approval. Failure to comply with the conditions of approval can result in materially adverse enforcement actions, including the loss or withdrawal of the approval. New PMA applications or PMA application supplements are required for significant modifications to the manufacturing process, as well as for modifications that affect the safety or effectiveness of the device, including, for example, certain types of modifications to the device’s indication for use, manufacturing process, labeling and design. PMA supplements often require submission of the same type of information as a PMA application, except that the supplement is limited to information needed to

21


 

support any changes from the de vice covered by the original PMA application, and may not require as extensive clinical data or the convening of an advisory panel.

Our microlens, as an implanted device, and our microlens inserter, as an instrument directly associated with the implantation process, cannot be marketed and sold in the United States without PMA approval. We anticipate that other products that we may develop in the future, as well as modifications to our existing products, will also be associated with the implantation process and thus in all likelihood will be subject to PMA approval rather than 510(k) clearance.

IDE Applications

A clinical trial is almost always required to support a PMA application. In the United States, absent certain limited exceptions, human clinical trials intended to support product clearance or approval require an IDE application. Some types of studies deemed to present “non-significant risk” are deemed to have an approved IDE once certain requirements are addressed and IRB approval is obtained. If the device presents a “significant risk” to human health, as defined by the FDA, the sponsor must submit an IDE application to the FDA and obtain IDE approval prior to commencing the human clinical trials. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to evaluate the device in humans and that the testing protocol is scientifically sound. The IDE application must be approved in advance by the FDA for a specified number of subjects, unless the product is deemed a non-significant risk device and eligible for more abbreviated IDE requirements.

In December 2013, we received approval of our IDE from the FDA to begin a staged pivotal clinical trial of our microlens in the United States.

Clinical Trials

Clinical trials for a Class III device may begin once the IDE application is approved by the FDA and the responsible IRBs at the clinical trial sites. There can be no assurance that submission of an IDE will result in the ability to commence clinical trials. Additionally, after a trial begins, the FDA may place it on hold or terminate it if, among other reasons, it concludes that the clinical subjects are exposed to unacceptable health risks that outweigh the benefits of participation in the study. During a study, sponsors are required to comply with the FDA’s IDE requirements for investigator selection, trial monitoring, reporting and record-keeping and with prohibitions on promoting investigational devices or making safety or efficacy claims for them. Sponsors are also responsible for the appropriate labeling and distribution of investigational devices.

We began enrollment for our U.S. staged pivotal clinical trial in May 2014 and began treating patients in June 2014. Initially, 75 subjects underwent insertion of our microlens at six investigational sites in the first stage of this study. Based on six-month data on 52 of these subjects, in January 2015, we submitted an interim safety report to the FDA along with a supplement to our IDE requesting approval to begin second stage enrollment. In February 2015, we received approval from the FDA to commence second stage enrollment in this trial. We were authorized to enroll up to an additional 337 subjects at up to nine additional investigational sites. Through February 15, 2016, 346 subjects underwent insertion of our microlens in the second stage of this study. The clinical trial that we have commenced for our microlens and our microlens inserter is expected to extend at least through 2018. Even if we do receive PMA approval, we do not anticipate receiving that approval for our microlens and our microlens inserter before the fourth quarter of 2018.

Our clinical trials must be conducted in accordance with FDA regulations and federal and state regulations concerning human subject protection, including informed consent and healthcare privacy. The investigators must also obtain patient informed consents, rigorously follow the investigational plan and study protocol, control the disposition of investigational devices and comply with all reporting and record-keeping requirements.

In addition, the FDA’s grant of permission to proceed with clinical testing does not constitute a binding commitment that the FDA will consider our study design adequate to support PMA approval. In addition, there can be no assurance that the data that we generate during a clinical study will meet chosen safety and effectiveness endpoints or otherwise produce results that will lead the FDA to grant marketing approval.

22


 

Pervasive and Continuing FDA Regulation

After a device is placed on the market, regardless of its classification or premarket pathway, numerous regulatory requirements apply. These include, but are not limited to:

 

·

establishment registration and device listings with the FDA, which helps facilitate FDA inspections and other regulatory action;

 

·

QSRs, which requires manufacturers, including third-party manufacturers, to follow stringent design, testing, process control, documentation and other quality assurance procedures during all aspects of the development and manufacturing process;

 

·

labeling control and advertising regulations, which prohibit the promotion of products for uncleared or unapproved, or off-label, uses or indications, and impose other restrictions on labeling;

 

·

approval or clearance of product modifications that could significantly affect safety or efficacy or that would constitute a major change in intended use;

 

·

medical device reporting regulations, which require that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if it were to recur;

 

·

corrections and removal reporting regulations, which require that manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health. In addition, the FDA may order a mandatory recall if there is a reasonable probability that the device would cause serious adverse health consequences or death; and

 

·

post-approval restrictions or conditions, including requirements to conduct post-market surveillance studies to establish continued safety data.

The FDA has broad post-market and regulatory enforcement powers. We will be required to register with the FDA as a medical device manufacturer. As such, our manufacturing facilities will be subject to FDA inspections for compliance with QSRs. These regulations will require that we manufacture our products and maintain our documents in a prescribed manner with respect to design, manufacturing, testing and quality control activities. As a medical device manufacturer, we will also be required to comply with FDA requirements regarding the reporting of adverse events associated with the use of our medical devices, as well as product malfunctions that would likely cause or contribute to death or serious injury if the malfunction were to recur. FDA regulations also govern product labeling and prohibit a manufacturer from marketing a medical device for unapproved applications. The FDA may conduct unannounced inspections to determine compliance with the QSR and other regulations, and these inspections may include the manufacturing facilities of subcontractors. Failure by us or our suppliers to comply with applicable regulatory requirements can result in enforcement actions by the FDA or other regulatory authorities, which may result in sanctions and related consequences including, but not limited to:

 

·

untitled letters or warning letters;

 

·

fines, injunctions, consent decrees and civil penalties;

 

·

recall, detention or seizure of our products;

 

·

operating restrictions, partial suspension or total shutdown of production;

 

·

refusal of or delay in granting our requests for premarket approval or clearances of new products or modified products;

 

·

once we have received premarket approvals or clearances, withdrawing those approvals or clearances that are already granted;

 

·

refusal to grant export approval for our products;

 

·

criminal prosecution; and

 

·

unanticipated expenditures to address or defend such actions.

Regulatory Requirements Outside of the United States

Sales of medical devices outside the United States are subject to non-U.S. regulatory requirements that vary widely from country to country. These laws and regulations range from simple product registration requirements in some countries to complex clearance and production controls in others. As a result, the processes and time periods required to obtain foreign marketing approval may be longer

23


 

or shorter than those necessary to obtain FDA market approval. These differences may affect the efficiency and tim eliness of international market introduction of our products.

In order to be placed on the market within the EEA, medical devices must meet the essential requirements set out in the relevant medical device legislation. The principal legislation regulating general medical devices in the EEA is Directive 93/42/EEC, referred to herein as the EU Medical Devices Directive. In the case of low risk (Class I) medical devices, such as our multi-use non-sterile microlens inserter, the manufacturer may self-certify conformity with the EU Medical Devices Directive by issuing a declaration of conformity. In the case of medium to high risk (Class Is, IIa, IIb and III) medical devices, including our single use sterile microlens inserter which is a Class Is medical device, and our microlens which is a Class IIb medical device, the certificate of conformity issues from a notified body. Where a medical device meets the essential requirements set out in the EU Medical Devices Directive and complies with the appropriate conformity assessment procedure, based on the classification of the medical device, a declaration or certificate of conformity will issue and a CE Mark may then be affixed to the product. Once a CE Mark has been affixed to the medical device, it may then be placed on the market in any country within the EEA and Switzerland (subject to certain localized registration and language requirements).

In February 2010, we received a certificate of conformity from our notified body for our microlens allowing the CE mark to be affixed to our microlens. In May 2013, we issued a declaration of conformity for our microlens inserter allowing the CE Mark to be affixed to our microlens inserter. We have also obtained an ISO 13485 quality system certification, which confirms that our medical device manufacturing quality management system is compliant with globally recognized standards set forth by the International Organization for Standardization. We are required to keep up-to-date and remain compliant with the most recently issued standards. In order to maintain our certificate of conformity and CE Mark, we must continue to comply with the EU Medical Devices Directive and pass annual facilities audit inspections by an inspection agency of the EEA to ISO 13485 standards. In addition, a notified body or other competent authority in an EEA country may perform post-marketing audits on our products and premises from time to time. Failure to comply with such requests in a timely manner, and any adverse findings in any such audit, could result in the withdrawal of our certificate of conformity and our CE Mark, and the recall or withdrawal of our products from the EEA market. Each certificate of conformity may be valid for a maximum of five years but would typically be valid for three years. Our existing certificate of conformity for our microlens is valid until November 2019. At the end of each period of validity, we are required to apply to the notified body for a renewal of our certificate of conformity. There may be delays in the renewal of our certificate of conformity and the notified body may require modifications to our products or to the related technical files before it agrees to issue a new certificate of conformity.

On September 26, 2012, the European Commission adopted a package of legislative proposals designed to replace the existing regulatory framework for medical devices in the EEA. The European Commission’s proposals may undergo significant amendments as they are reviewed by the European Council and European Parliament as part of the EEA legislative process. If and when adopted, the proposed new legislation may prevent or delay the EEA approval or clearance of any future products we may develop or impact our ability to modify currently EEA approved or cleared products on a timely basis.

In addition, we have obtained marketing authorization for our microlens and microlens inserter in certain countries outside of the EEA, including certain countries in which our microlens is currently commercially available. We are subject to the regulatory laws and regulations of each such country in order to maintain our marketing authorization. In addition, we will be subject to the regulatory laws and regulations of any additional country in which we obtain marketing approval to maintain such approval. These regulatory laws are complex and vary from country to country. Failure to comply with applicable laws and regulations could jeopardize our ability to sell our products and result in a variety of enforcement actions, all of which would negatively impact our business, results of operations and financial condition.

Corruption Laws

The U.S. Foreign Corrupt Practices Act and similar foreign anti-corruption laws generally prohibit companies and their intermediaries from making improper payments or providing anything of value to improperly influence foreign government officials for the purpose of obtaining or retaining business, or obtaining an unfair advantage. In recent years, there has been a substantial increase in the global enforcement of anti-corruption laws. Our ongoing non-U.S. operations and our expansion into additional countries outside the United States, including in developing countries, could increase the risk of such violations. Violations of these laws may result in severe criminal or civil sanctions, could disrupt our business, and could adversely affect our reputation, business and results of operations or financial condition.

Environmental Matters

Our activities currently require the controlled use of potentially harmful biological materials and hazardous materials and chemicals. We are subject to U.S. federal, state and local and non-U.S. environmental and pollution control laws and regulations governing the

24


 

use, storage, handling and disposal of these materials and specified waste pr oducts. We believe that our operations comply in all material respects with applicable environmental laws and regulations in each country where we conduct business or have operations. We do not expect compliance with these laws to affect materially our cap ital expenditures, earnings or competitive position. We have no plans to invest in material capital expenditures for environmental control facilities for the remainder of our current fiscal year or for the next fiscal year. We are not aware of any pending actions, litigation or significant financial obligations arising from current or past environmental practices that are likely to have a material adverse impact on our financial position. However, environmental problems relating to our properties could deve lop in the future, and such problems could require significant expenditures. In addition, we cannot predict changes in environmental legislation or regulations that may be adopted or enacted in the future and that may adversely affect us.

Employees

As of December 31, 2015, we had 40 employees, one of whom holds a Bachelor of Optometry degree, and nine of whom hold other advanced degrees. Of our total workforce, nine employees are engaged in research and development, and 31 employees are engaged in business development, manufacturing, finance, legal, human resources, facilities, information technology administration and general management. We have no collective bargaining agreements with our employees and we have not experienced any work stoppages. We believe that our relations with our employees are good.

Facilities

Our operations are currently conducted at three leased facilities. We lease or sublease an aggregate of approximately 14,500 square feet of office, laboratory and manufacturing space in Irvine, California, we lease approximately 538 square feet of office and storage space in Amsterdam, the Netherlands, and we lease approximately 610 square feet of office and warehouse space in Dublin, Ireland. Our corporate headquarters is currently located at our Dublin location.

We believe that our existing facilities are adequate for our current needs. When our leases expire, we may seek to renew our leases or look for additional or alternate space for our operations. We believe that suitable additional or alternative space will be available in the future on commercially reasonable terms.

Corporate History and Information

In February 2015, Presbia PLC consummated its initial public offering of ordinary shares. Prior to our initial public offering, we effected a series of reorganization transactions described below.

Presbia Holdings was organized in the Cayman Islands in 2007 as an exempted company with limited liability. In 2009, Presbia Holdings acquired Visitome, Inc., a California corporation and the developer of our corneal inlay technology.

In October 2013, we completed a restructuring which involved the establishment of our interim holding company, Presbia Ireland, Limited, that directly or indirectly owns 100% of our business, assets and subsidiaries. Presbia Ireland, Limited is organized under the laws of Ireland as a private limited company. At the time of the restructuring, Presbia Ireland, Limited was wholly-owned by Presbia Holdings and certain intercompany debt was owed to Presbia Holdings by certain of its other subsidiaries. As part of the restructuring, approximately $12.2 million of such outstanding intercompany debt owed to Presbia Holdings was converted to equity of such subsidiaries. We refer to this transaction as the 2013 Restructuring.

In November 2014, Presbia Holdings converted additional indebtedness owed to Presbia Holdings by certain subsidiaries of Presbia Ireland, Limited at that time to equity. In this transaction, approximately $23.5 million of outstanding intercompany debt owed to Presbia Holdings was converted to equity of such subsidiaries. We refer to this transaction as the 2014 Debt Conversion.

In January 2015, Presbia Holdings converted all the remaining indebtedness owed by a subsidiary of Presbia Ireland, Limited at that time to equity. In this transaction, approximately $1.6 million of outstanding intercompany debt owed to Presbia Holdings was converted to equity of such subsidiary. We refer to this transaction as the 2015 Debt Conversion. In addition, immediately following the 2015 Debt Conversion, Presbia Holdings contributed all the share capital in issue in Presbia Ireland, Limited to Presbia PLC, an Irish incorporated public limited company formed in February 2014 for the purpose of consummating our initial public offering, in exchange for 9,166,667 ordinary shares of Presbia PLC. We refer to this transaction as the 2015 Capital Contribution. Presbia PLC previously issued 40,000 ordinary shares to Presbia Holdings upon its formation, in order to satisfy statutory requirements for the incorporation of all Irish public limited companies, which were re-designated as deferred shares under our memorandum and articles of association prior to the consummation of our initial public offering. We refer to the 2014 Debt Conversion, the 2015 Debt Conversion and the 2015 Capital Contribution, collectively, as the 2014-2015 Restructuring.

25


 

We refer to the 2013 Restructuring, t he formation and initial capitalization of Presbia PLC, and the 2014-2015 Restructuring, collectively, as the Reorganization Transactions.

In August 2015, Presbia Holdings distributed the 9,166,667 ordinary shares of Presbia PLC, referred to herein as the 2015 Capital Contribution and an additional 500,000 ordinary shares acquired from the initial public offering for an aggregate of 9,666,667 ordinary shares, to its ordinary shareholders and liquidated the entity in November 2015.

Our corporate structure is set forth below.

 

Our principal executive offices are located at 120/121 Baggot Street Lower, Dublin 2 Ireland, and our telephone number is +353 (1) 659 9446.

Our website address is http://www.presbia.com. The information in, or that can be accessed through, our website is not part of this Annual Report on Form 10-K. Our annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K and amendments to those reports are available, free of charge, on or through our website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities Exchange Commission, or the SEC. The public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. Information on the operation of the Public Reference Room can be obtained by calling 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements and other information regarding our filings at www.sec.gov.

 

 

Item 1A. Risk Factors

We are providing the following cautionary discussion of risk factors, uncertainties and assumptions that we believe are relevant to our business. These are factors that, individually or in the aggregate, we think could cause our actual results to differ materially from expected and historical results and our forward-looking statements. We note these factors for investors as permitted by Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act, and Section 27A of the Securities Act of 1933, as amended, or the Securities Act. You should understand that it is not possible to predict or identify all such factors. Consequently, you should not consider this section to be a complete discussion of all potential risks or uncertainties that may substantially impact our business. Moreover, we operate in a competitive and rapidly changing environment. New factors emerge from time to time and it is not possible to predict the impact of all of these factors on our business, financial condition or results of operations.

26


 

Risks Related to Our Business

We anticipate that we will continue to incur significant losses for the foreseeable future and, if we are unable to achieve and sustain profitability, the market value of our ordinary shares will likely decline.

We are an ophthalmic device company with a limited operating history. We do not possess the regulatory approvals necessary to market our products in the United States, and we continue to incur significant research and development, sales and marketing and general and administrative expenses related to our operations. We are not profitable and have incurred losses in each year since our formation. Our net losses for the years ended December 31, 2015 and 2014 were $18.2 million and $15.7 million, respectively. As of December 31, 2015, we had an accumulated deficit of $55.5 million.

We expect to continue to incur significant losses for the foreseeable future. We expect that these losses and our cash needs will increase in the near term as we continue to conduct our staged pivotal clinical trial in the United States, seek marketing approval in other countries, and commercialize our products in those non-U.S. markets where we are permitted to sell our microlens and microlens inserter. We may never achieve profitability, and unless and until we do, we will need to continue to raise capital. We expect to finance future cash needs through public or private equity offerings, debt financings or corporate collaborations and licensing arrangements. Additional funds may not be available when we need them on terms that are acceptable to us, or at all. If adequate funds are not available, we may be required to delay, reduce the scope of, or curtail, our operations. To the extent that we raise additional funds by issuing equity securities, our shareholders will experience dilution, and debt financing, if available, may involve restrictive covenants. We may not be able to enter into collaborations that we seek to establish. To the extent that we raise additional funds through collaborations and licensing arrangements, it may be necessary to relinquish some rights to our technologies or our product candidates or grant licenses on terms that may not be favorable to us. We may seek to access the public or private capital markets whenever conditions are favorable, even if we do not have an immediate need for additional capital at that time.

We expect to incur substantial expenses in our pursuit of regulatory approval in the United States and can provide no assurances that we will obtain the necessary approvals from the FDA to market our products in the United States.

The United States is a key market for commercialization of our microlens. Before we can market our products in the United States, we must conduct and successfully complete extensive clinical trials and then receive premarketing approval, or PMA, from the FDA. The earliest that we can reasonably expect to receive a PMA for our microlens and microlens inserter is in the fourth quarter of 2018, and it is possible that none of our existing products or any products we may seek to develop in the future will ever obtain a PMA. Furthermore, even if we were to obtain a PMA, neither approval by the FDA nor our existing CE Mark ensures approval by regulatory authorities in other countries or jurisdictions that we are targeting for commercialization of our microlens and microlens inserter, and approval by one regulatory authority does not ensure approval by regulatory authorities in other countries or by the FDA.

The time required to obtain approval by the FDA and comparable non-U.S. regulatory authorities is unpredictable and depends upon numerous factors, including the substantial discretion of such regulatory authorities. In addition, approval policies, regulations or the type and amount of preclinical and clinical data necessary to gain approval may change during the course of a product’s development and may vary among jurisdictions. We will be required to undertake and complete certain studies to generate data required to support submissions to the FDA and certain other regulatory authorities, which studies may require additional capital and time. If we do not receive or maintain regulatory approvals for our products in the United States and other jurisdictions that we target for commercialization of our products, we will not be able to successfully commercialize our products, which would substantially impair our ability to generate revenues and materially harm our business, results of operations and financial condition.

 

Based on our current plan, we believe we will likely need additional capital to support our operations.

 

Based on our current business plan, we believe that our cash and cash equivalents at December 31, 2015, coupled with anticipated revenues outside of the United States will be sufficient to meet our anticipated cash requirements through the first quarter of 2017.  Our current commercialization strategy is targeted to countries where we believe we can both establish the market for our technology and achieve positive cash flow from such geographic market as soon as possible.  This commercialization strategy will undergo continual prioritization and in the future we may adjust our commercialization efforts to preserve our existing cash or realize better results than anticipated which could have a positive impact on cash.  Our U.S. pivotal clinical trial and planned FDA approval is our highest priority.  That priority, coupled with our current commercialization efforts outside the U.S., will likely result in our need to raise additional capital to fund our operations.  We may raise additional capital through equity offerings, debt financings, collaborations and/or licensing arrangements. Additional funds may not be available when we need them on terms that are acceptable to us, or at all. If adequate funds are not available on acceptable terms, we may be required to delay, reduce the scope of, or curtail, our operations. To the extent that we raise additional funds by issuing equity securities, our shareholders will experience dilution, and debt financing, if available, may involve restrictive covenants.

27


 

Our microlens and microlens inserter are currently our sole products and we are highly dependent on the successful marketing and sales of these products. There is no assurance that we will be able to develop any additional products.

Our microlens and microlens inserter are currently our sole products. We may fail to successfully commercialize our products. Successfully commercializing medical devices such as our microlens is a complex and uncertain process, dependent on the efforts of management, distributors, outside consultants and general economic conditions, among other factors. Any factors that adversely impact the commercialization of our microlens including, but not limited to, the delay or denial of regulatory approvals that we seek, competition or acceptance in the marketplace, will have a negative impact on our business, results of operations and financial condition. We cannot assure you that we will be successful in developing or commercializing any potential enhancements to our microlens or any other products. Our inability to successfully commercialize our current products and/or successfully develop and commercialize additional products or any enhancements to our products which we may develop would have a material adverse effect on our business, results of operations and financial condition.

Our planned clinical trials may be delayed, suspended or terminated, which could delay or prohibit us from obtaining regulatory approvals or make obtaining such regulatory approvals more costly

In February 2015, we received approval from the FDA to commence second stage enrollment in our U.S. staged pivotal clinical trial. By September 2015 we had completed the second stage enrollment in our U.S. staged pivotal clinical trial. However, delays in the completion of clinical testing could significantly affect our product development costs. The completion of clinical trials can be delayed for a number of reasons, including delays related to:

 

·

unexpected adverse effects experienced by patients in a clinical trial; and

 

·

retaining patients who have initiated a clinical trial, but may withdraw due to treatment protocol, adverse effects from the therapy, lack of efficacy from the treatment or personal issues or who may not return for a sufficient number of post-operatic visits to allow us to obtain the data required to support our PMA submission.

Clinical trials may also be delayed, suspended or terminated as a result of ambiguous or negative interim results, or results that are inconsistent with earlier results. In addition, a clinical trial may be suspended or terminated by us, the FDA or other regulatory authorities due to a number of factors, including:

 

·

failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols;

 

·

inspection of the clinical trial operations, trial sites or manufacturing sites by the FDA or other regulatory authorities, resulting in the imposition of a clinical hold;

 

·

unforeseen safety issues or any determination that a clinical trial presents unacceptable health risks; and

 

·

lack of adequate funding to continue the clinical trial, including the incurrence of unforeseen costs due to enrollment delays, requirements to conduct additional clinical trials or increased expenses associated with the services of our CROs and other third parties.

Our product development costs will increase if we experience delays in testing or if we need to perform more or larger clinical trials than planned. Additionally, changes in regulatory requirements and policies may occur in any jurisdiction and we may need to amend clinical trial protocols to reflect these changes. Amendments may require us to resubmit our clinical trial protocols to independent ethical committees, known as institutional review boards, or IRBs, for reexamination, which may impact the costs, timing or successful completion of a clinical trial. In addition, IRBs or other regulatory authorities may order the temporary discontinuation or termination of our clinical trials at any time if they believe that the clinical trials are not being conducted in accordance with applicable regulatory requirements, including if they present an unacceptable safety risk to patients. If we experience delays in completion of, or if we, the FDA or other regulatory authorities, an IRB or other reviewing entities, or any of our clinical trial sites suspend or terminate any of, our clinical trials, the commercial prospects for our products may be harmed and our ability to generate revenues will be delayed. In addition, many of the factors that cause, or lead to, termination or suspension of, or a delay in the commencement or completion of, clinical trials may also ultimately lead to the denial of regulatory approval of a product. Also, if one or more clinical trials are delayed, our competitors may be able to bring products to market before we do or further entrench their products in the market, and the commercial viability of our product candidates could be significantly reduced.

If concerns regarding side effects from presbyopia correction surgery generally, or our products specifically, develop, including as a result of third-party studies and publications, our business, results of operations and financial condition will be materially and adversely affected.

Concerns about potential side effects and long-term results may negatively impact market acceptance of presbyopia correction surgery generally or our products specifically, result in potential liability for us and prevent us from growing our business. Any undesirable

28


 

side effects that may be discovered in our clinical trials or evaluations or in any third party studies or evaluations could delay or prevent regulatory approval, including FDA approval, could prevent us from maintaining our existing regulatory approvals, including our CE mark, or limit mark etability of our products.

In early 2012, we completed a 12-month multicenter, post-market evaluation in Italy and Greece of our microlens in presbyopic patients between the ages of 45 and 60. The 12-month data for 70 patients indicated certain post-operative adverse events, including: one removal of the microlens, as a result of a patient’s complaints of significant halos and glare when driving at night; one case of transient light sensitivity syndrome (an abnormal occurrence of photosensitivity associated with the femtosecond laser); one case of epithelial ingrowth (an abnormal growth of corneal epithelium in an area where it does not belong, associated with the femtosecond laser); and four cases of transient stromal haze (the activation of inflammatory cells in connection with surgery). In addition, certain patients experienced a slight loss in uncorrected visual acuity-distance, or UCVA-distance, which is distance vision in the operated eye without prescription enhancement. For further information regarding this post-market evaluation, see “Part I, Item 1. Business—Our Solution—Evaluation Conducted Outside of the United States.”

In addition, our microlens has been the subject of certain third party studies that have been conducted to assess the efficacy and safety of our microlens. We did not commission these studies or design, review or oversee the implementation of their protocols, and we have limited information with respect to these studies. These studies have reported certain adverse effects relating to the safety and efficacy of our microlens and microlens inserter. With respect to the below referenced third-party study conducted in Japan, we paid the annual fees of the IRB which reviews the study’s protocol.

One ongoing third-party study being conducted in Italy from 2011 to present by a group of ophthalmic surgeons evaluated the efficacy and safety of our microlens in 81 patients. Of the 81 patients evaluated, six patients underwent removal of our microlens within 12 months of implantation due to patient-reported reduction in distance vision and the presence of halos and glare. Findings that our microlens compromises distance vision could result in the suspension of our U.S. clinical trial, delay, make it more difficult and expensive for us to receive and/or prevent us from receiving, or prevent us from maintaining, regulatory approvals, including FDA approval or our CE mark, or limit marketability of our microlens and microlens inserter.

Another third-party study conducted in Japan from 2012 to April 2014 by one ophthalmic surgeon evaluated the efficacy and safety of our microlens in 38 patients. Such study reports a number of adverse events, including: three cases of inlay defect (a mark or defect seen on the edge of the microlens that is made by the microlens inserter due to improper microlens loading prior to insertion); two cases of epithelial ingrowth (an abnormal growth of corneal epithelium in an area where it does not belong associated with the femtosecond laser); two cases of microlens removal (related to halos and glare); one case of meibomianitis (inflammation of the meibomian glands, a group of oil-secreting glands in the eyelids); one case of moderate foreign debris (the presence of material in the pocket after using a laser and inserting the microlens); one case of severe keratic precipitates (an accumulation of white blood cells on the corneal endothelium which arises as a result of inflammatory reactions); one case of superficial punctate keratitis (a non-inflammatory condition of the cornea with discrete opacities of the cornea, without ulceration); and one case of vertical gas bubbles (escape of gas bubbles from the dissection plane into the trabecular meshwork then to the anterior chamber during laser-assisted flap or tunnel creation). Such study also documented 17 observations of “foreign debris” of unknown composition and origin under high magnification slit lamp examination (three of such 17 patients also experienced one of the other adverse events noted above, including the moderate case of foreign debris noted above which was reported as an adverse event). The ophthalmic surgeon performing the testing initially reported such foreign debris to be metallic.

As a result of the foreign debris adverse event noted in this study, the other foreign debris observations noted in this study and in the study in Russia discussed below, as well as anecdotal comments made by certain other surgeons regarding observations of foreign debris, we opened a corrective action and preventive action investigation to assess possible sources of the foreign debris. We developed a matrix of all possible sources of the foreign debris, including our microlens inserter, and conducted analysis and performed a literature review to determine the source of the foreign debris. As part of this analysis, we collected nine sterilized (but not cleaned) microlens inserters used in the Japan study (as well as an additional microlens inserter that had not been opened or used in the Japan study) and arranged for a third party to analyze such microlens inserters for the presence of foreign debris. Of the 10 microlens inserters that were tested, one microlens inserter was found to have two particles present, and two microlens inserters were found to have one particle present. These particles were determined to be series 300 stainless steel. The quantity and shape of these particles did not appear to be consistent with the characteristics of the foreign particles noted in the study conducted by the ophthalmic surgeon in Japan.

Based on the outcome of this initial analysis, additional testing was conducted to evaluate all possible sources that could lead to the observation of foreign debris as reported in the study conducted by the ophthalmic surgeon in Japan. Actuation tests were performed on 12 of our microlens inserters by a third party. The microlens inserters were not cleaned or sterilized between actuation ranges. Five of the 12 microlens inserters included in this testing came directly from the manufacturer and had never undergone cleaning or sterilization. Of the 12 microlens inserters tested, five microlens inserters did not produce particles in any of the actuation ranges. One

29


 

microlens inserter that had not been cleaned or sterilized produced particles in the one to 10 actuation r ange, four of the 12 microlens inserters produced particles in the 11 to 25 actuation range, two of the 12 microlens inserters produced particles in the 26 to 50 range, and six of the 12 microlens inserters produced particles in the 51 to 100 range. Certai n of the particles were determined to be series 300 stainless steel and others were determined to be titanium.

Following the actuation tests, additional testing was conducted to evaluate the cause of the foreign debris noted in third-party studies. As part of our ongoing corrective action and preventative action plan, we arranged for an analysis of the microlens of a patient (who was one of the two patients noted above in the Japanese study who had their microlens removed due to halos and glare) who was noted to have foreign debris present following implantation. This patient’s microlens was removed following implantation for reasons unrelated to the presence of the foreign debris (the patient’s microlens was removed due to repeated decentering of the microlens post-implantation). The removed microlens was found to have five foreign particles present. Initial testing concluded that the foreign particles were likely composed of stainless steel, which suggested that one or more metal instruments present in the surgical environment was likely the source of the foreign particles. Initial testing also concluded that galling, or chafing, may be occurring between the plunger and head assembly components of our microlens inserter, which could be the cause of the production of metal debris. As a result of these initial findings, additional testing was conducted by a third-party metallurgist at our request to determine whether the composition of the foreign particles in the removed microlens is consistent with the elements and concentrations thereof found in our microlens inserter. Such additional testing confirmed that the foreign particles in the explanted lens were of stainless steel composition, but also determined that the composition of the foreign particles was not consistent with the composition of our microlens inserter.

At this juncture, we have not reached any definitive conclusions as to the source of the foreign debris noted in the third-party studies. The final report of our corrective action and preventative action investigation was submitted to the FDA in November 2015. We received questions back from FDA and have provided responses to the questions regarding the debris. We are presently awaiting additional questions from FDA based on submitted responses. As a result of additional testing that we have completed as part of our investigation, we believe that our microlens inserter has the potential to produce metallic debris, although the debris noted during such testing was generally environmental in nature and was not considered clinically significant. In addition, there have now been a total of 26 observations of foreign debris in the 421 subjects implanted in the first and second stages (combined) of our U.S. staged pivotal clinical trial. None of these 26 observations was reported as an adverse event. Of the 26 observations, four patients experienced adverse events, and none of these adverse events were related to the presence of debris.  In all 26 observations, the debris was not considered clinically significant. We have reported these 26 observations in our interim safety report submitted to the FDA.

A common source of non-metallic debris is the general surgical environment. Several articles written over the last 10 years report that interface debris is a relatively common finding in patients who have undergone LASIK surgery or phacoemulsification (cataract surgery in which the eye’s internal lens is emulsified with an ultrasonic hand piece and aspired from the eye).

Other than the one case of moderate foreign debris reported as an adverse event in the third party study conducted in Japan, at this time, we are not aware of any additional adverse events reported with respect to the foreign debris observations noted in the third party studies or our U.S. staged pivotal clinical trial. We have developed additional cleaning and sterilization procedures and packaging procedures which are designed to provide microlens inserters in a clean initial condition prior to use. As part of our ongoing risk mitigation efforts, we are continuing to develop a disposable microlens inserter for our microlens and a pre-loaded disposable microlens inserter. In addition, with respect to our staged pivotal clinical trial that we are conducting in the United States, each microlens inserter is continuing to only being used one time in order to mitigate the potential risk associated with the possible creation of metal foreign debris during insertion of our microlens. If our microlens inserter or any other equipment supplied by us is determined to pose a health risk through the deposit of metal debris in a patient’s eye, such determination could result in the suspension of our U.S. clinical trial, delay, make it more difficult and expensive for us to receive and/or prevent us from receiving, or prevent us from maintaining, regulatory approvals, including FDA approval or our CE mark, limit marketability of our products and subject us to lawsuits or claims.

Three additional third-party studies conducted at three locations in Brazil beginning in 2012 evaluated the efficacy and safety of our microlens. The first ongoing study reported that four of 22 patients lost three or more lines of UCVA-distance at one year postoperative compared to an average UCVA-distance of 20/20 before the study. No additional adverse events were reported in that study. The second study reported that two of 10 patients lost two lines of UCVA-distance vision at three months postoperative compared to an average UCVA-distance of 20/20 before the study. No additional adverse events were reported in the study. The third ongoing study did not provide visual acuity data and no adverse events were reported

One additional third-party study of the efficacy and safety of our microlens was conducted in 2012 in Russia. This study reported that two of 10 patients experienced a decrease in UCVA-distance and BCVA-distance at three months postoperative due to night glare compared to before the study (preoperative visual acuity was not provided). One of these patients underwent removal of our

30


 

microlens, and no additional adverse events were reported for the patient after lens removal. This study also noted minimal debris inclusion in two cases. No additional postoperative adverse events were r eported in this study.

We are aware of one additional case of a patient undergoing microlens removal in a commercial setting in the Czech Republic and three additional cases of a patient undergoing microlens removal in commercial settings in Brazil. In addition, in March 2014, we became aware of a request for removal of a microlens from a patient who was implanted in Brazil. We have been informed that after treatment with a topical steroid, the patient’s inflammation issues have resolved and the patient does not wish to have the microlens removed.

In connection with the patient implants as part of the ongoing pivotal clinical trial in the United States, adverse events in treated eyes experienced to date include 73 reports of loss of best corrected distance visual acuity in treated eyes, eight reports of transient corneal haze, and eight reports of microlens explantation due to an inability of these patients to adapt to the technology. No unanticipated adverse device effects in the implanted eyes have been reported in this study to date. We have had seven serious adverse events reported for subjects unrelated to our microlens.

If our microlens or microlens inserter are ultimately determined to produce undesirable side effects, including posing a health risk through the deposit of foreign particles in a patient’s eye, such determination could result in the suspension of our U.S. staged pivotal clinical trial, delay, make it more difficult and expensive for us to receive and/or prevent us from receiving, or prevent us from maintaining, regulatory approvals, including FDA approval or our CE mark, limit marketability of our products and subject us to lawsuits or claims.

Adverse findings in post-marketing vigilance or regulatory audits could subject us to suspension or withdrawal of our certificates of conformity, mandatory product recalls and significant legal liability, which would materially and adversely affect our business, results of operations and financial condition.  

In February 2010, we received a certificate of conformity from our Notified Body (a third-party organization designated by competent authorities of the European Economic Area (all European Union member states plus Iceland, Liechtenstein and Norway), or EEA, to conduct regulatory oversight on medical devices) for our microlens allowing the CE Mark to be affixed to our microlens, permitting our microlens to be placed on the market within any state in the EEA and Switzerland (subject to certain localized registration and language requirements). Manufacturers of medical devices in the EEA are required to implement post-marketing vigilance procedures with respect to their CE Marked medical devices. Such post-marketing vigilance procedures include surveillance of patient and user complaints and alleged adverse events associated with the use of CE Marked medical devices. Serious incidents associated with the use of a medical device must be reported to the competent authority in whose territory the incident occurred. Incidents that must be reported include any malfunction or deterioration in the characteristics and/or performance of a device, as well as any inadequacy in the labeling or the instructions for use which, directly or indirectly, might lead to or might have led to the death of a patient, user or other person, or to a serious deterioration in their state of health. Incidents must be reported as soon as possible, and in some cases immediately, after the manufacturer becomes aware of the incident. In addition to reporting the incident, the manufacturer must investigate the incident and take any corrective action required. The required corrective action depends on the seriousness of the incident, and varies from the issuance of advisory notices to the implementation of product recalls. Minor incidents not requiring notification to the competent authorities must be documented, reviewed, investigated and analyzed on a regular basis by the manufacturer to determine whether trending conclusions can be made concerning the safety or performance of the medical device and whether actions must be taken in relation to the continued marketing of medical devices currently on the market. We expect to incur ongoing costs to comply with these post-market vigilance obligations in EEA markets for so long as we continue to market and sell products in those markets. Moreover, any patient or user complaints and/or adverse events discovered during such post-market vigilance could subject us to suspension or withdrawal of our certificates of conformity, mandatory product recalls and significant legal liability, which would materially and adversely affect our business, results of operation and financial condition. In addition, a notified body or other competent authority in an EEA country may perform post-marketing audits on our products and premises from time to time. Failure to comply with such requests in a timely manner, and any adverse findings in any such audit, could subject us to suspension or withdrawal of our certificates of conformity, mandatory product recalls and significant legal liability, which would materially and adversely affect our business, results of operations and financial condition.

We were previously subject to certain legal proceedings relating to the ownership of certain assets, including intellectual property. As demonstrated by such proceedings, future claims regarding intellectual property may be costly and time consuming to defend and future claims may delay or prevent the development and commercialization of our products or place our patent portfolio and other proprietary rights at risk.

In June 2008, Biovision AG, a Swiss company, was liquidated in bankruptcy in Switzerland. Vladimir Feingold, our Chief Technology Officer and one of our directors, was a minority owner of Biovision AG and served as its President and Chief Executive Officer. During the bankruptcy auction in Switzerland, Thomke Invest AG, or Thomke, purchased certain assets of Biovision AG with

31


 

the stated intention of transferring those assets to Biovision Technology AG, which is now Ne optics AG, a competitor developing an alternative corneal inlay surgical lens to treat presbyopia. Disputes arose as to the scope of the purchased assets, the propriety of the Swiss auction, and what persons or entities had superior rights with respect to certain property, data, know-how, processes, and technology relating to a specialized surgically implanted lens to treat presbyopia, which we refer to collectively as the Disputed Assets.

Two competing lawsuits were filed in July 2008. The first lawsuit, which we refer to as the Thomke Action, was filed in the Superior Court of the State of California, County of Orange, by Thomke against Mr. Feingold, Biovision AG, our Visitome, Inc. subsidiary, Zohar Loshitzer, one of our directors, Orchard Capital Corporation, which is owned by Richard Ressler (one of our directors and our controlling shareholder), and Swiss Investment Corporation. In its complaint, Thomke alleged, among other things, wrongful possession of personal property and conversion of the Disputed Assets. The second lawsuit, which we refer to as the Visitome Action, was filed on the same day in the same court by our Visitome, Inc. subsidiary seeking a declaration of rights with respect to the Disputed Assets. In November 2012, Swiss Investment Corporation and Mr. Feingold filed a lawsuit in Switzerland to invalidate certain orders issued by the Swiss Insolvency Office with respect to the Disputed Assets.

The Thomke Action and the Visitome Action were eventually consolidated. On December 12, 2012, the parties to the various lawsuits and certain of their affiliates entered into a settlement agreement to settle the three lawsuits. The parties to the settlement agreement included certain of our affiliates, including Mr. Feingold, Mr. Loshitzer, Visitome, Inc., PresbiBio, LLC, Presbia Holdings and Orchard Capital Corporation. The resulting settlement agreement included, among other things, (i) dismissals (with prejudice) of the three lawsuits, (ii) mutual releases of all matters arising prior to the date of the settlement agreement, including, without limitation, claims regarding the Disputed Assets, (iii) mutual waivers of all known or unknown matters subject to the mutual releases, (iv) mutual covenants not to sue in connection with matters released under the settlement agreement, and (v) acknowledgements and agreements to the terms of the settlement agreement by certain of our other affiliates not party thereto.

We cannot guarantee that we will not be subject to future claims regarding intellectual property. If successful, any such claims could place our patent portfolio and other proprietary rights at risk, which would have a material and adverse effect on our business, results of operations and financial condition. Even if such claims are not successful, they could be costly and time consuming to defend and they could delay or prevent the development and commercialization of our products.

We have a limited operating history and may face difficulties encountered by early stage companies in new and rapidly evolving markets.

We concluded our initial public offering (“IPO”) in January 2015 and have a limited operating history. In assessing our future prospects, you should consider the risks and difficulties frequently encountered by early stage companies in new and rapidly evolving markets, particularly companies engaged in the development and sales of medical devices. These risks include our ability to:

 

·

manage expectations during the lengthy process of obtaining PMA approval from the FDA;

 

·

establish and increase awareness of our brand and strengthen customer loyalty;

 

·

grow our business in targeted markets outside of the United States while awaiting FDA approval;

 

·

implement and successfully execute our commercialization strategy;

 

·

respond effectively to competitive pressures and developments;

 

·

continue to develop and enhance our products in development;

 

·

obtain and publish sufficient clinical data to reduce the uncertainty surrounding clinical acceptance of our microlens;

 

·

obtain regulatory approval to commercialize our products and, when and if approved, enhance those products;

 

·

maintain compliance with all applicable regulatory statutes and regulations;

 

·

expand our global presence;

 

·

perform clinical research and trials on our existing products and future product candidates;

 

·

attract, retain and motivate qualified personnel; and

 

·

raise additional capital, on favorable or acceptable terms, if at all.

As a result of these or other risks, our business strategy might not be successful.

32


 

We are engaged in an intensely comp etitive business with competitors that may enjoy significant competitive advantages over us and if we are unable to compete successfully against our existing or potential competitors, our sales and operating results may be negatively affected and we may no t grow.

The market for surgical presbyopia correction is intensely competitive, both in and outside of the United States, and competition may increase. In addition to our company, there are at least four companies currently developing competing corneal inlay surgical solutions—AcuFocus, Inc., Revision Optics, Inc., Neoptics AG and LensGen, Inc. Other non-corneal inlay procedures also offer solutions to presbyopia, including: monovision approaches (whereby one eye, typically the dominant eye, is corrected for distance vision and the other eye is corrected for near vision using glasses, contact lenses or surgical procedures); multifocal approaches (whereby both a distance focus and a near focus are provided at the same time in each eye using glasses, contact lenses, surgically implanted artificial lenses or laser surgery); and accommodating approaches (whereby surgically implanted artificial lenses are designed to mimic the movement of the natural crystalline lens of the eye or techniques are used to attempt to restore the function of the eye’s own accommodative system). Certain companies enjoy competitive advantages over us, including: significantly greater name recognition; established relations with healthcare professionals and customers; established distribution networks; additional lines of products; greater experience in conducting research and development, manufacturing, clinical trials, obtaining regulatory approval for products, and marketing approved products; greater financial and human resources for product development, sales and marketing, and patent litigation; and earlier commencement and successful completion of U.S. pivotal clinical trials. To compete in this market requires an ongoing, extensive search for technological innovation and the ability to respond to rapid technological change. It also requires, among other things, the ability to effectively discover, develop, test and obtain regulatory approvals for products, as well as the ability to effectively commercialize, market and promote approved products, including communicating the effectiveness, safety and value of products to actual and prospective patients and medical professionals. A better-financed or lower-cost provider of corneal inlay surgical solutions or a competing vision treatment could take market share away from us or force us to lower product prices, causing our revenues and results of operations to decline materially.

If we do not convince ophthalmic surgeons that our products are attractive alternatives to our competitors’ products as well as a complementary solution to other existing vision correction procedures, we will not be commercially successful.

Ophthalmic surgeons play a significant role in determining the course of treatment and, ultimately, the type of products that will be used to treat a patient for presbyopia. As a result, it will be important for us to effectively market our products to them. Acceptance of our products depends on educating ophthalmic surgeons as to the distinctive characteristics, perceived clinical benefits, safety and cost effectiveness of our products as compared to our competitors’ products as well as the utility of our microlens to be used as a complementary procedure to existing surgical treatments for visual problems. It also depends on training ophthalmic surgeons in the proper application of our products. If we are not successful in convincing ophthalmic surgeons of the merits of our products or educating them on the use of our products, they may not use our products and we will be unable to fully commercialize our products or reach profitability. Ophthalmic surgeons may be hesitant to change their medical treatment practices for the following reasons, among others:

 

·

lack of experience with our products and concerns regarding potential side effects;

 

·

prior negative experience with competitors’ inlay products and surgeons’ concerns that our products may lead to similar negative patient outcomes;

 

·

lack of clinical data currently available to support the safety and effectiveness of our products;

 

·

existing relationships with competitors and distributors that sell their products;

 

·

lack or perceived lack of evidence supporting additional patient benefits;

 

·

perceived liability risks generally associated with the use of new products and procedures; and

 

·

the time commitment that may be required for training.

In addition, we believe recommendations and support of our products by influential ophthalmic surgeons are important for market acceptance and adoption. If we do not receive support from such ophthalmic surgeons or long term data does not show the benefits of using our products, ophthalmic surgeons may not use our products. In such circumstances, we may not be able to grow our revenues or achieve profitability.

If we are unable to train ophthalmic surgeons and their clinical staff on the safe and appropriate use of our products, we may be unable to achieve revenue growth or profitability.

An important part of our sales process includes the ability to train ophthalmic surgeons and their clinical staff on the safe and appropriate use of our products. We have very limited experience in training and retaining qualified independent ophthalmic surgeons

33


 

to perform presbyopia correction surgery using our products. If we are unable to attract ophthalmic surgeons to our training programs, we may be unable to achieve growth or profitability.

There is a learning process involved in ophthalmic surgeons and their clinical staff becoming proficient in the use of our products. It is critical to the success of our commercialization efforts to train a sufficient number of ophthalmic surgeons and to provide them with adequate instruction in the use of our microlens and microlens inserter. This training process may take longer than expected and may therefore affect our ability to increase sales. Following completion of training, we expect to rely on the trained ophthalmic surgeons to advocate the benefits of our products in the broader marketplace. Convincing ophthalmic surgeons to dedicate the time and energy necessary for adequate training is challenging, and we cannot assure you we will be successful in these efforts. If ophthalmic surgeons and their clinical staff are not properly trained, they may misuse or ineffectively use our products. Such uses may result in unsatisfactory patient outcomes, patient injury, negative publicity or lawsuits against us, any of which would have a material adverse effect on our business, results of operations and financial condition.

Our reliance on a single third-party supplier for sales of our microlens outside of the United States and our reliance on a limited number of third-party suppliers for our microlens inserter could harm our ability to meet demand for our products in a timely and cost effective manner.

We rely on a single supplier located in Israel (Hanita Lenses) to manufacture and supply our microlens that we sell outside of the United States. This supplier has committed to a guaranteed minimum production level that we believe is adequate to meet our current needs. The agreement with this supplier is set to expire in January 2017. We have manufacturing capacity in Irvine, California, but items manufactured in that facility to date have been used solely for pre-IDE testing in the United States. Our U.S. facility received regulatory approval from the State of California to manufacture our microlens for our U.S. staged pivotal trial and during 2014 and 2015 provided all of the required lenses that were used in the treatment phase for 421 patients. Also, our U.S. facility received regulatory approval to manufacture our microlens for sale in the EEA. We expect to continue to utilize our existing Israeli supplier for products sold outside of the United States, including in the EEA, unless and until we determine that it is more efficient for our company to manufacture our microlens for sale outside the United States and we obtain any additional regulatory approvals that may be required. Given the location of our Israeli supplier, the supply of our microlens could be disrupted if events were to occur in the Middle East that resulted in social, political, economic or military instability. Given our reliance on this supplier, with whom our supply agreement expires in January 2017, and our limited experience manufacturing our microlens at our California facility, we cannot assure you that we will be able to obtain sufficient quantities of our microlens in the future, which could have a material adverse effect on our business, results of operations and financial condition.

Our microlens inserter is manufactured by a third-party original equipment manufacturer in the United States (Total Titanium, Inc.). We do not have a guaranteed supply commitment from this supplier. Although we believe that this supplier, in conjunction with the disposable inserters designed and produced internally, will be able to meet our foreseeable needs, we cannot assure you that we will be able to obtain sufficient quantities of our microlens inserter in the future, which could have a material adverse effect on our business, results of operations and financial condition.

For us to be successful, our suppliers must be able to provide us with products in desired quantities, in compliance with regulatory requirements, in accordance with agreed-upon detailed specifications, at acceptable costs and on a timely basis. Reliance on third party suppliers entails risks to which we would not be subject if we manufactured all of our products ourselves, including reliance on the third parties for regulatory compliance and quality assurance, the possibility that products will not be delivered on a timely basis, the possibility of increases in pricing for our products, the possibility of breach of the applicable manufacturing agreement by third parties and the possibility of termination or non-renewal of the agreement by third parties. If any of these risks materialize, it could significantly increase our costs and impact our ability to meet demand for our products and could have a material adverse effect on our business, results of operations and financial condition. If we are unable to satisfy commercial demand for our products in a timely manner, our ability to generate revenue would be impaired, market acceptance of our products could be adversely affected and customers may instead purchase or use our competitors’ products. Securing a replacement supplier could be difficult, time-consuming and expensive.

There are a limited number of suppliers and third-party manufacturers that operate under the FDA’s current Good Manufacturing Practices, or cGMP, maintain certifications of the International Standards Organization, or ISO, that are recognized as harmonized standards in the EEA, and have the necessary expertise and capacity to manufacture our products. As a result, if it were necessary to terminate our relationship with our existing suppliers, it may be difficult for us to locate another supplier that could promptly fulfill our anticipated future needs. If we are unable to arrange for third-party manufacturing of our products, or are unable to do so on commercially reasonable terms, our sales may be materially and adversely affected.

34


 

We rely on a single third -party supplier to supply the raw material used to manufacture our microlens.

The hydrophilic acrylic material used to manufacture our microlens is supplied to us by a single supplier located in the United Kingdom. We do not have a guaranteed supply commitment from this supplier. Although we believe that such supplier will be able to sufficiently meet our currently anticipated supply needs, we cannot assure you that we will be able to obtain sufficient quantities of the hydrophilic acrylic material in the future, which could have a material adverse effect on our business, results of operations and financial condition. In addition, we would be required to obtain approval from the FDA in the event that we wished to use different material or similar material from a different supplier with respect to any products to be offered and sold in the United States.

The global nature of our business may result in fluctuations and declines in our sales and profits.

Our products are currently available in several countries outside of the United States. Because we have received a CE Mark for our microlens, we have the ability presently to market that product within the EEA, and in Switzerland. For the foreseeable future, pending receipt of the necessary FDA approvals to market our products in the United States, we expect that sales outside of the United States will represent 100% of our revenues. We may be exposed to transaction risk because some of our sales and expenses will be incurred in a different currency than the local currency. To date, we have not attempted to offset our exposure to this risk by investing in derivatives or engaging in other hedging transactions.

Economic, social and political conditions, laws, practices and local customs vary widely among the countries in which we sell our products. Our operations outside of the United States face a number of risks and potential costs, enjoy less stringent protection of intellectual property and face economic, political and social uncertainty in some countries, especially in emerging markets. We have limited experience developing and manufacturing our products to comply with the commercial and legal requirements of markets outside of the United States. Our success in markets outside of the United States will depend, in part, on our ability to manufacture products that meet applicable regulatory and commercial requirements, our ability to enforce contractual commitments and our ability to develop and implement policies and strategies that are effective in anticipating and managing these and other risks in the countries where we do business. Such risks may have a material adverse effect on our operations in any particular country and on our business as a whole. Inflation in emerging markets also may make our products more expensive there and increase the credit risks to which we will be exposed.

If we do not successfully implement our commercialization strategy, our business, results of operations and financial condition will be adversely affected.

We have developed our commercialization strategy based on assumptions about the presbyopia market that might prove to be wrong. We believe that various demographics and industry-specific trends, including adults noticing the onset of presbyopia as they reach their forties, the demands upon our eyes resulting from the increased use of electronic devices and increasing acceptance of eye surgeries as alternatives to reading glasses and contact lenses, will help drive growth in our market and our business, but these demographics and trends are uncertain. Actual demand for our products could differ materially from projected demand if our assumptions regarding these factors prove to be incorrect or do not materialize, or if alternative treatments to those offered by our products gain widespread acceptance.

We may not be able to successfully implement our commercialization strategy. To implement our commercialization strategy of initially dealing directly with laser centers, we must, among other things, educate the decision-makers within these organizations regarding the advantages of our products and processes, train professionals working in those centers on how to use our products, enter into commercially reasonable agreements with those centers and engage in careful follow-up to capture relevant experience and demonstrate our goal to partner with our laser center customers. Our strategy of focusing exclusively on the presbyopia market may limit our ability to grow. Moreover, even if we successfully implement our commercialization strategy, our operating results may not improve or may decline. We may decide to alter or discontinue aspects of our commercialization strategy and may adopt different strategies due to business or competitive factors not currently foreseen, such as new medical technologies that would make our products obsolete. Any failure to implement our business strategy may materially and adversely affect our business, results of operations and financial condition.

If the market does not accept and endorse presbyopia correction surgery, we will not be able to successfully execute our business plan.

We believe that our profitability and our ability to expand depend to a large extent on the acceptance of vision correction surgeries in general, as well as presbyopia correction surgery specifically, as a safe and effective treatment option. Even if we obtain FDA and other required regulatory approvals, if presbyopia correction surgery does not gain broad market acceptance, our opportunity to achieve profitability and sustained growth will be severely limited. We cannot assure you that presbyopia correction surgery will be accepted widely, if at all, by ophthalmic surgeons, ophthalmologists, optometrists or the general population as an alternative to

35


 

existing or future methods of treati ng presbyopia or other refractive vision disorders. Market acceptance depends on a number of factors, including:

 

·

the efficacy and safety of our products as demonstrated in clinical trials, as well as by actual usage in jurisdictions where our products are authorized for marketing and sale;

 

·

the clinical indications for which our products are approved if and when approvals are granted;

 

·

acceptance by ophthalmic surgeons, ophthalmologists, optometrists and ophthalmic centers;

 

·

third-party publications reporting findings with respect to the efficacy and safety of our products;

 

·

the potential and demonstrable advantages of our products and of competitive products and processes;

 

·

relative convenience and ease of administration;

 

·

the tolerance of our products by patients, including prevalence and severity of side effects; and

 

·

the effectiveness of our sales and marketing efforts.

Any factor that adversely impacts market acceptance of presbyopia correction surgery will have a negative impact on our business, results of operations and financial condition.

We do not anticipate that our microlens and the procedure to implant our microlens will be reimbursable through private or governmental third-party payors, which could limit market acceptance.

Our microlens and the procedure to implant our microlens are not currently reimbursable through private or governmental third-party payors in any country. In addition, we do not anticipate that our microlens and the procedure to implant our microlens will be reimbursable through private or governmental third-party payors in the foreseeable future. The commercialization of our microlens depends on prospective patients’ ability to cover the costs of our microlens and the implantation procedure. We believe that a substantial portion of presbyopes worldwide do not have the financial means to cover the costs of our microlens. A general regional or worldwide economic downturn could negatively impact demand for our microlens. In the event that medically eligible patients deem the costs of our procedure to be prohibitively high or consider alternative treatment options to be more affordable, our business, results of operations and financial condition would be negatively impacted.

Our ability and the ability of our subsidiaries to use net operating loss carryforwards and certain other tax attributes may be limited.

Our ability and the ability of our subsidiaries to utilize United States federal net operating loss carryforwards and federal tax credits may be limited under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, or the Code. The limitations apply if an “ownership change,” as defined by Section 382, occurs. Generally, an ownership change occurs if the percentage of the value of the stock that is owned by one or more direct or indirect “five percent shareholders” increases by more than 50 percentage points over their lowest ownership percentage at any time during the applicable testing period (typically three years). The ownership change of a parent entity may result in the ownership change of a subsidiary. If we or any of our subsidiaries have experienced an “ownership change” at any time since formation, that corporation may already be subject to limitations on the ability to utilize existing net operating losses and other tax attributes to offset taxable income. In addition, future changes in our stock ownership, which may be outside of our control, may trigger an “ownership change” and, consequently, Section 382 and 383 limitations. As a result, if we or our subsidiaries earn net taxable income, the ability to use pre-change net operating loss carryforwards and other tax attributes to offset United States federal taxable income may be subject to limitations, which could potentially result in increased future tax liability to us or our subsidiaries.

We may not be able to achieve a competitive worldwide effective corporate tax rate.

We cannot give any assurance as to what our effective tax rate will be, because of, among other things, uncertainty regarding the geographic mix of any income we generate and the tax policies of the jurisdictions where we operate. Our actual effective tax rate may vary from our expectation and that variance may be material. Additionally, the tax laws of Ireland and other jurisdictions could change in the future, and such changes could cause a material change in our effective tax rate, which may negatively impact our business, results of operations and financial condition.

Presbia PLC and its Presbia Ireland, Limited subsidiary are incorporated in and resident for tax purposes in Ireland. Accordingly, they are subject to Irish corporation tax on their worldwide income and gains. The current rates of Irish corporation tax are 12.5% for certain trading income, 25% for all other income, and 33% for capital gains. It is anticipated that we will be subject to the lower rate of

36


 

Irish corporation tax applicable to our trading income (currently 12.5%) on the basis that we will be carrying on a trade in Ireland for Irish tax purposes. However, we cannot guarantee that our activities in Ireland will be sufficient to qualify for trading status in respect of all or any portion of our income. There is no comprehensive definition of what constitutes “trading” for Irish tax purposes, and whether or not a compan y is carrying on a trade in Ireland for Irish tax purposes is determined on the facts of each individual case. Consequently, we cannot assure you that the Irish Revenue (Tax) authorities would accept our trading status for Irish tax purposes in respect of all or any portion of our income. If it is determined that we are not in fact carrying on a trade in Ireland for Irish tax purposes, our income in Ireland could be subject to a 25% tax rate, including future royalty income from the U.S. market.

Our status as a foreign corporation for U.S. federal income tax purposes could be affected by changes in applicable laws.

We believe that, under current law, we are treated as a foreign corporation for U.S. federal income tax purposes. However, changes to the inversion rules in Section 7874 of the Code or the U.S. Treasury Regulations promulgated thereunder or other U.S. Internal Revenue Service, or IRS, or U.S. Treasury Department guidance could adversely affect our status as a foreign corporation for U.S. federal income tax purposes, and any such changes could have prospective or retroactive application to us and/or our respective shareholders and affiliates. Most recently, the U.S. Treasury Department issued Notice 2014-52, which applies stricter “anti-inversion” rules to inversion transactions occurring on or after September 22, 2014. Although the Notice in its current form would not affect our status as a foreign corporation, the U.S. Congress may enact legislation in the future to change the inversion rules, possibly retroactively. In addition, recent legislative proposals have aimed to expand the scope of U.S. corporate tax residence, and such legislation, if passed, could have a material and adverse effect on us.

We depend on key employees, the loss of which could substantially damage our business and our ability to compete.

We depend on the continued service of our executive officers, including our chief executive officer, Todd Cooper, and our chief technology officer, Vladimir Feingold, and other key employees. The loss of a key employee could hurt our business substantially. Mr. Feingold and Mr. Cooper are employees at will and are not subject to a non-compete obligation. We could be particularly damaged if any of our executive officers or any other key employee or employees went to work for our competitors. Our future success depends on our ability to identify, attract, train, motivate and retain other highly skilled personnel. Failure to do so may adversely affect our results. Other than with respect to Mr. Feingold, we do not maintain insurance policies to cover the cost of replacing the services of any of our key employees who may unexpectedly die or become disabled.

We may seek to grow our business through acquisitions of or investments in new or complementary businesses, products or technologies, and the failure to manage any acquisitions or investments, or the failure to integrate them with our existing business, could have a material adverse effect on us.

From time to time, we expect to consider opportunities to acquire or make investments in other technologies, products and businesses that may enhance our capabilities, complement our current products or expand the breadth of our markets or customer base. Potential and completed acquisitions and strategic investments involve numerous risks, including:

 

·

problems assimilating the purchased technologies, products or business operations;

 

·

maintaining uniform standards, procedures, controls and policies;

 

·

unanticipated costs associated with acquisitions;

 

·

diversion of management’s attention from our core business;

 

·

adverse effects on existing business relationships with suppliers;

 

·

risks associated with entering new markets in which we have limited or no experience;

 

·

potential loss of key employees of acquired businesses; and

 

·

increased legal and accounting compliance costs.

We have no current commitments or intentions with respect to any acquisition or investment. We do not know if we will be able to identify suitable acquisitions, complete any such acquisitions on favorable terms or at all, successfully integrate any acquired business, product or technology into our business or retain any key personnel, suppliers or distributors. Our ability to grow through acquisitions successfully depends upon our ability to identify, negotiate, complete and integrate suitable target businesses and to obtain any necessary financing. These efforts could be expensive and time-consuming, and may disrupt our ongoing business and prevent management from focusing on our operations. If we are unable to integrate any acquired businesses, products or technologies effectively, our business, results of operations and financial condition would be materially and adversely affected.

37


 

We may need to increase the size of our organization, and we may experi ence difficulties in managing growth.

As of December 31, 2015, we had 40 employees. Whether or not we grow by acquisition or internal growth, we expect that it will be necessary to expand our managerial, operational, financial and other resources in order to manage our operations and clinical trials, continue our development activities and fully commercialize our products. Our systems currently in place may not be adequate to support this future growth. Our need to effectively execute our business strategy requires that we:

 

·

manage our clinical trials effectively;

 

·

provide substantial support to ophthalmic centers at the time that we enter into contractual relationships with them and provide ongoing support even after the centers are fully trained;

 

·

manage our internal development efforts effectively;

 

·

continue to improve our operational, financial and management controls, reporting systems and procedures; and

 

·

identify, recruit, maintain, motivate and integrate additional employees.

If we are unable to expand our managerial, operational, financial, and other resources to the extent required to manage our development and commercialization activities, our business, results of operations and financial condition would be materially and adversely affected.

We may be subject to costly product liability claims related to our clinical trials and products and, if we are unable to obtain adequate insurance or are required to pay for liabilities resulting from a claim excluded from, or beyond the limits of, our insurance coverage, a material liability claim could adversely affect our financial condition.

We face the risk that the use of our products may result in adverse side effects to patients in our clinical trials. We face even greater risks in connection with the commercialization of our products, including our current sales outside of the United States. Although we maintain product liability insurance and request that laser centers and hospitals offering our products, and the physicians at such facilities, maintain product liability insurance, any such insurance coverage may be insufficient to reimburse us for any expenses or losses we may suffer, and we may be required to increase our product liability insurance coverage for trials that we initiate in the future. We do not know whether we will be able to continue to obtain product liability coverage and obtain expanded coverage if we require it, on acceptable terms, or at all. We may not have sufficient resources to pay for any liabilities resulting from a claim excluded from, or beyond the limits of, our insurance coverage. To the extent that we provide indemnities in favor of third parties under our agreements with them, there is also a risk that these third parties could incur liability and bring a claim under such indemnities. An individual may bring a product liability claim against us alleging that one of our products caused an injury or is found to be unsuitable for consumer use. Any product liability claim brought against us, with or without merit, could result in:

 

·

withdrawal of clinical trial volunteers, investigators, patients or trial sites;

 

·

difficulties in commercializing our products;

 

·

decreased demand for our products;

 

·

regulatory investigations that could require costly recalls or product modifications;

 

·

loss of revenues;

 

·

substantial costs of litigation;

 

·

liabilities that substantially exceed our product liability insurance, which we would then be required to pay ourselves;

 

·

an increase in our product liability insurance rates or the inability to maintain insurance coverage in the future on acceptable terms, if at all;

 

·

the diversion of management’s attention from our business; and

 

·

damage to our reputation and the reputation of our products.

Product liability claims may subject us to the foregoing and other risks, which could have a material adverse effect on our business, results of operations and financial condition.

38


 

If we use biological and hazardous materials in a manner that causes injury or violates applicable laws or regulations, we could be liable for damage s.

Our activities currently require the controlled use of potentially harmful biological materials and hazardous materials and chemicals. We cannot eliminate the risk of accidental contamination or injury to employees or third parties from the use, storage, handling or disposal of these materials. In the event of contamination or injury, we could be held liable for any resulting damages, and any liability could exceed our resources or any applicable insurance coverage we may have. Additionally, we are subject to, on an ongoing basis, a variety of federal, state and non-U.S. environmental and pollution control laws and regulations governing the use, storage, handling and disposal of these materials and specified waste products. The cost of compliance with these laws and regulations may become increasingly significant and could have a material adverse effect on our business, results of operations and financial condition. In the event of an accident or if we otherwise fail to comply with applicable regulations, we could lose our permits or approvals or be held liable for damages or penalized with fines.

Our employees may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk of employee fraud or other misconduct. Misconduct by employees could include intentional failures to comply with FDA or other governmental regulations, to provide accurate information to the FDA or other governmental authorities, to comply with applicable privacy laws, to comply with manufacturing standards we have established, to adequately monitor clinical investigation sites, or to report financial information or data accurately. Employee misconduct could involve the improper use of information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. It is not always possible to identify and deter employee misconduct, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of significant fines or other sanctions.

Our sales volumes and our operating results may fluctuate from quarter to quarter, which may make our performance more difficult to understand and may make our future performance more difficult to predict.

We may experience meaningful variability in our sales and operating expenses among quarters, as well as within each quarter, as a result of a number of factors, including, among other things:

 

·

the timing of or failure to obtain regulatory approvals or clearances for products;

 

·

the number of products sold in the quarter;

 

·

the demand for, and pricing of, our products and the products of our competitors;

 

·

costs, benefits and timing of new product introductions;

 

·

increased competition;

 

·

the availability and cost of components and materials;

 

·

the number of selling days in the quarter; and

 

·

impairment and other special charges.

Such quarterly fluctuations may make it difficult to understand our performance and predict our future performance.

If we experience material weaknesses in the future or otherwise fail to maintain an effective system of internal controls in the future, we may not be able to accurately report our financial condition or results of operations which may adversely affect investor confidence in us and, as a result, the value of our ordinary shares.

As a result of becoming a public company, we are required, under Section 404 of the Sarbanes-Oxley Act of 2002, or the Sarbanes-Oxley Act, to establish adequate internal control over financial reporting and disclosure controls and procedures and to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting. This assessment must include disclosure of any material weaknesses identified by our management in our internal control over financial reporting. A material weakness is a deficiency or combination of deficiencies in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of a company’s annual and interim financial statements will not be detected or prevented on a timely basis.

39


 

The effectiveness of our controls and procedures may be limited by a variety of factors, including:

 

·

faulty human judgment and simple errors, omissions or mistakes;

 

·

fraudulent action of an individual or collusion of two or more people;

 

·

inappropriate management override of procedures; and

 

·

the possibility that any enhancements to controls and procedures may still not be adequate to assure timely and accurate financial control.

If, in the future, we are unable to conclude that our internal control over financial reporting is effective, we could lose investor confidence in the accuracy and completeness of our financial reports, which would likely cause the price of our ordinary shares
to decline.

When we cease to be an “emerging growth company” and a “smaller reporting company” under the federal securities laws, our auditors will be required to express an opinion on the effectiveness of our internal controls. If we are unable to confirm that our internal control over financial reporting is effective, or if our auditors are unable to express an opinion on the effectiveness of our internal controls, we could lose investor confidence in the accuracy and completeness of our financial reports, which could cause the price of our ordinary shares to decline.

We are incurring significant costs as a result of being a public company, which may adversely affect our operating results and financial condition.

We are incurring costs associated with corporate governance requirements, including requirements under the Sarbanes-Oxley Act, as well as rules implemented by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the SEC, and the NASDAQ listing rules. These rules and regulations are expected to increase our accounting, legal and financial compliance costs and make some activities more time-consuming and costly. In addition, we are incurring additional costs associated with our public company reporting requirements and we expect those costs to increase in the future. As a public company, it is more expensive for us to maintain directors’ and officers’ liability insurance and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our board of directors, or our Board, committees of our Board, or as executive officers. We cannot predict or estimate the amount of additional costs we may incur or the timing of such costs.

If we experience significant disruptions or security breaches in our information technology systems, our business may be adversely affected.

We depend on our information technology systems for the efficient functioning of our business, including accounting, data storage, compliance, purchasing and inventory management. Although we attempt to mitigate interruptions, we may experience difficulties in implementing certain upgrades, which would impact our business operations, or experience difficulties in operating our business during the upgrade, either of which could disrupt our operations, including our ability to timely ship and track product orders, project inventory requirements, manage our supply chain and otherwise adequately service our customers. In the event we experience significant disruptions as a result of the implementation of our information technology systems, we may not be able to repair our systems in an efficient and timely manner. Furthermore, despite the implementation of security measures, our information technology systems and those of our clinical research organizations, contract manufacturers and other contractors and consultants are vulnerable to damage from cyber-attacks, malicious intrusion, computer viruses, unauthorized access, loss of data privacy, natural disasters, terrorism, war and telecommunication, electrical failures or other significant disruption.   Accordingly, such events may disrupt or reduce the efficiency of our entire operation, and result in a loss or damage to our data or inappropriate disclosure of confidential or proprietary information, and have a material adverse effect on our results of operations and cash flows.

Fluctuations in insurance cost and availability could adversely affect our profitability or our risk management profile.

We hold a number of insurance policies, including product liability insurance, directors’ and officers’ liability insurance, general liability insurance, property insurance and workers’ compensation insurance. If the costs of maintaining adequate insurance coverage increase significantly in the future, our operating results could be materially and adversely affected. Likewise, if any of our current providers should no longer be able to provide coverage to us, we may not be able to find another provider that provides comparable coverage for comparable costs, which could impact our coverage and materially and adversely affect our operating results.

40


 

Risks Related to our Regulatory Requirements

Our products are subject to extensive governmental regulation both in the United States and in other countries, and our failure to comply with applicable requirements could cause our business to suffer.

Our products are subject to extensive regulation by the FDA and various other U.S. federal, state and non-U.S. governmental authorities, such as the competent authorities of the countries of the EEA and other countries in which we currently have marketing approval and/or conduct operations. Government regulation of medical devices is meant to assure their safety and effectiveness, and includes regulation of, among other things:

 

·

design, development and manufacturing;

 

·

testing, labeling, content and language of instructions for use and storage;

 

·

clinical trials;

 

·

product safety;

 

·

marketing, sales and distribution;

 

·

regulatory approvals and clearances, including premarket approval and clearance;

 

·

conformity assessment procedures;

 

·

product traceability and record keeping procedures;

 

·

advertising and promotion;

 

·

product complaints, complaint reporting, recalls and field safety corrective actions;

 

·

post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury;

 

·

post-market studies; and

 

·

product import and export.

Failure to comply with applicable laws and regulations could jeopardize our ability to sell our products and result in enforcement actions such as:

 

·

delays in the introduction of products into the market;

 

·

warning letters;

 

·

injunctions;

 

·

fines and other civil penalties;

 

·

termination of distribution;

 

·

recalls or seizures of products;

 

·

total or partial suspension of production;

 

·

refusal of the FDA or other regulators to grant necessary approvals or clearances;

 

·

withdrawals or suspensions of then current approvals or clearances, resulting in prohibitions on sales of our products;

 

·

withdrawal of the CE Certificates of Conformity granted by the notified body or delay in obtaining these certificates; and/or

 

·

in the most serious cases, criminal penalties.

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, results of operations and financial condition.

41


 

We are subject to complex regulations which have tended to bec ome more stringent over time. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales.

Our current products are Class III devices under the U.S. Food, Drug and Cosmetic Act, or FDCA, and thus subject to more stringent regulatory controls than other medical devices. Before we can market or sell our microlens and our microlens inserter in the United States, we must obtain approval of a PMA application from the FDA. Our Investigational Device Exemption, or IDE, enables us to use our microlens and our microlens inserter in clinical studies in order to begin to collect safety and effectiveness data for the PMA application. In the PMA approval process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as implantable devices, as well as life-sustaining and life-supporting devices. The process of obtaining a PMA generally takes from one to four years, or even longer, from the time the application is submitted to the FDA until an approval is obtained. We do not expect to receive our PMA any earlier than in the fourth quarter of 2018.

Future products that we may develop, as well as material modifications to our existing products, will require a new PMA. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, our product introductions or modifications could be delayed or canceled, which could cause our sales to decline. Outcomes under the PMA process are difficult to predict, as are the time and expense associated with that process. Further, even if any of our future products do not require a PMA, we cannot assure you that we will be able to obtain clearances under Section 510(k) of the FDCA, or 510(k) clearances, which is a less onerous approval process than the PMA process, with respect to those products.

The FDA can delay, limit or deny approval or clearance of a device for many reasons, including:

 

·

our inability to demonstrate to the FDA’s satisfaction that our products are safe and effective for their intended uses;

 

·

the data from our pre-clinical studies and clinical trials may be insufficient to support clearance or approval, where required; and

 

·

the manufacturing process or facilities we use may not meet applicable requirements.

Significant delays in receiving approval or clearance, or the failure to receive approval or clearance for our products, would adversely affect our ability to generate revenues and negatively impact our business, results of operations and financial condition.

In addition, the FDA may change its approval and clearance policies, adopt additional regulations or revise existing regulations, or take other actions that may prevent or delay approval or clearance of our products under development or impact our ability to modify any products that may be approved or cleared. For example, in 2011, the FDA announced a Plan of Action to modernize and improve the FDA’s premarket review of medical devices, and has implemented, and continues to implement, reforms intended to streamline the premarket review process. In addition, as part of the U.S. Food and Drug Administration Safety and Innovation Act of 2012, or FDASIA, the U.S. Congress enacted several reforms entitled “Medical Device Regulatory Improvements” and additional miscellaneous provisions which will further affect medical device regulation both pre- and post-approval. Any change in the laws or regulations that govern the approval and clearance processes relating to our current and future products could make it more difficult and costly to obtain approval or clearance for new products, or to produce, market and distribute existing products.

Any delay in, or failure to receive or maintain, approval or clearance for our products under development could prevent us from generating revenue in the United States from these products or achieving profitability. Additionally, the FDA and other regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some ophthalmic surgeons from using our products and adversely affect our reputation and the perceived safety and efficacy of our products.

In addition, even if we obtain the proper regulatory approval or clearance to market a product, the FDA has the power to require us to conduct post-market surveillance systems, which are designed to identify adverse events, device malfunctions or complaints from patients implanted with the device during a specified period after the commencement of commercial use in the United States. The FDA may also require us to conduct post-marketing studies to further monitor the safety and/or efficacy of our products. Failure to conduct required surveillance systems or studies in a timely manner could result in the revocation of the PMA approval or 510(k) clearance for the product that is subject to such a requirement and could also result in the recall or withdrawal of the product, which would prevent us from generating sales from that product in the United States.

In order to be placed on the market within the EEA, medical devices must meet the essential requirements set out in the relevant medical device legislation. The principal legislation regulating general medical devices in the EEA is Directive 93/42/EEC, referred to herein as the EU Medical Devices Directive. In the case of low risk (Class I) medical devices, such as our microlens inserter, the

42


 

manufacturer may self-certify conformity with the EU Medical Devices Directive by issuing a declaration of conformity. In the case of medium to high risk (Class IIa, IIb and III) medical devices, including our microlens which is a Class IIb medical device, the certificate of conformity issues fro m a notified body. Where a medical device meets the essential requirements set out in the EU Medical Devices Directive and complies with the appropriate conformity assessment procedure, based on the classification of the medical device, a declaration or ce rtificate of conformity will issue and a CE Mark may then be affixed to the product. Once a CE Mark has been affixed to the medical device, it may then be placed on the market in any country within the EEA and Switzerland (subject to certain localized regi stration and language requirements).

In February 2010, we received a certificate of conformity from our notified body for our microlens allowing the CE Mark to be affixed to our microlens. In May 2013, we issued a declaration of conformity for our microlens inserter allowing the CE Mark to be affixed to our microlens inserter. We have also obtained an ISO 13485 quality system certification, which confirms that our medical device manufacturing quality management system is compliant with globally recognized standards set forth by the International Organization for Standardization. We are required to keep up-to-date and remain compliant with the most recently issued standards. In order to maintain our certificate of conformity and CE Mark, we must continue to comply with the EU Medical Devices Directive and pass annual facilities audit inspections by an inspection agency of the EEA to ISO 13485 standards. In addition, a notified body or other competent authority in an EEA country may perform post-marketing audits on our products and premises from time to time. Failure to comply with such requests in a timely manner, and any adverse findings in any such audit, could result in the withdrawal of our certificate of conformity and our CE Mark, and the recall or withdrawal of our products from the EEA market. Each certificate of conformity may be valid for a maximum of five years but would typically be valid for three years. Our existing certificate of conformity for our microlens is valid until November 2019. At the end of each period of validity, we are required to apply to the notified body for a renewal of our certificate of conformity. There may be delays in the renewal of our certificate of conformity and the notified body may require modifications to our products or to the related technical files before it agrees to issue a new certificate of conformity.

On September 26, 2012, the European Commission adopted a package of legislative proposals designed to replace the existing regulatory framework for medical devices in the EEA. The European Commission’s proposals may undergo significant amendments as they are reviewed by the European Council and European Parliament as part of the EEA legislative process. If and when adopted, the proposed new legislation may prevent or delay the EEA approval or clearance of any future products we may develop or impact our ability to modify currently EEA approved or cleared products on a timely basis.

The United States, in which we are seeking marketing approval, those countries which recognize our CE mark, and those other countries in which we have marketing approval, collectively, only represent a portion of the worldwide presbyopic population. To market and sell our products in other countries, including those countries that may represent a substantial portion of the worldwide presbyopic population, we must seek and obtain regulatory approvals, certifications and/or registrations and comply with the laws and regulations of those countries. These laws and regulations, including the requirements for approvals, certifications and/or registrations and the time required for regulatory review, vary from country to country. Obtaining and maintaining regulatory approvals, certifications and/or registrations are expensive, and we cannot be certain that we will receive regulatory approvals, certifications and/or registrations in any country for which we have yet to receive such approvals, certifications and/or registrations or that we will be able to maintain any regulatory approvals, certifications and/or registrations that we currently possess. If we fail to obtain or maintain regulatory approvals, certifications and/or registrations in any country in which we plan to market our products, our ability to generate revenue will be harmed.

Failure to comply with applicable laws and regulations could jeopardize our ability to sell our products and result in a variety of enforcement actions, all of which would negatively impact our business, results of operations and financial condition.

Modifications to our products may require new premarket approvals or may require us to cease marketing or recall the modified products until approvals are obtained.

Any modification to a PMA-approved device that could significantly affect its safety or effectiveness, including significant design and manufacturing changes, or that would constitute a major change in its intended use, design or manufacture, may require approval of a new PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new approvals are necessary. If the FDA disagrees with any determination that we may make in the future and requires us to seek new PMA approvals for modifications to any previously approved or cleared products for which we have concluded that new approvals are unnecessary, we may be required to cease marketing or distribution of our products or to recall the modified product until we obtain approval, and we may be subject to significant regulatory fines or penalties. We have commenced the development of a disposable microlens inserter that will require a 510(k) submission and a pre-loaded disposable microlens inserter which may require an additional PMA submission.

43


 

In the EEA, we are required to inform the notified body that carried out the conformity assessment of the medical devices we market or sell in the EEA of any planned changes to our quality system or changes to our devices which could a ffect compliance with the essential requirements set forth in the EU Medical Devices Directive or the devices’ intended purpose. The notified body will then assess the changes and verify whether they affect the products’ conformity with the essential requi rements set forth in the EU Medical Devices Directive or the conditions for the use of the device. If the assessment is favorable, the notified body will issue a new CE Certificate of Conformity or an addendum to the existing CE Certificate of Conformity a ttesting compliance with the essential requirements set forth in the EU Medical Devices Directive. If it is not, we may not be able to continue to market and sell the product in the EEA.

We may fail to obtain or maintain regulatory approvals to market our products in countries outside of the United States.

We market our products in certain countries outside of the United States and intend to expand our non-U.S. marketing. Each jurisdiction that we target for commercialization of our products requires regulatory approvals and compliance with numerous and sometimes varying regulatory requirements. In addition to the countries in which we currently have marketing approval, we are seeking regulatory approval or clearance to market our products in China, Taiwan, Peru, Saudi Arabia, India and Turkey. The approval procedures vary among countries and may involve requirements for additional testing, and the time required to obtain approval may differ from country to country and from that required to obtain clearance or approval in the United States and the necessary CE Certificates of Conformity in the EEA countries.

Approval or clearance in the United States and/or a CE Certificate of Conformity in the EEA countries does not ensure approval or certification by regulatory authorities in other countries or jurisdictions, and approval or certification by one regulatory authority does not ensure approval or certification by regulatory authorities in other countries or by the FDA. Any non-U.S. regulatory approval or certification process may include similar risks associated with obtaining FDA clearance or approval. In addition, some countries only approve or certify a product for a certain period of time, in which case we will be required to re-approve or re-certify our products in a timely manner prior to the expiration of our prior approval or certification. We may not obtain regulatory approvals that we seek on a timely basis, if at all. We may not be able to file for regulatory approvals or certifications and may not receive or maintain necessary approvals to commercialize our products in any market. If we fail to receive or maintain necessary approvals or certifications to commercialize our products in any non-U.S. jurisdiction on a timely basis, or at all, or if we fail to have our products re-approved or re-certified, our business, results of operations and financial condition could be materially and adversely affected.

If we or our suppliers fail to comply with ongoing EEA and FDA or other regulatory authority requirements, or if we experience unanticipated problems with our products, these products could be subject to restrictions or withdrawal from the market.

Any product for which we obtain approval or clearance, and the manufacturing processes, reporting requirements, post-approval clinical data and promotional activities for such product, will be subject to continued regulatory review, oversight and periodic inspections by the FDA and other U.S. and non-U.S. regulatory authorities. In particular, we and our third-party suppliers will be required to comply with the FDA’s Quality System Regulation, or QSR. In EEA countries, compliance with harmonized standards is also recommended as this is often interpreted as a presumption of conformity with the relevant essential requirements set forth in Annex I to the EU Medical Devices Directive. These FDA regulations and EU standards cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of our products. Compliance with applicable regulatory requirements is subject to continual review and is monitored rigorously through periodic inspections by the FDA. Compliance with harmonized standards in the EEA is also subject to regular review through the conduct of inspections by notified bodies or other certification bodies. If we, or our suppliers, fail to adhere to QSR requirements in the United States or other harmonized standards in the EEA, this could delay production of our products and lead to fines, difficulties in obtaining regulatory clearances and CE Certificates of Conformity, recalls, enforcement actions, including injunctive relief or consent decrees, or other consequences, which could, in turn, have a material adverse effect on our business, financial condition or results of operations.

In addition, the FDA audits compliance with the QSR through periodic announced and unannounced inspections of manufacturing and other facilities. The failure by our company or any of our suppliers to comply with applicable statutes and regulations administered by the FDA, or the failure to timely and adequately respond to any adverse inspectional observations or product safety issues, could result in any of the following enforcement actions:

 

·

untitled letters, warning letters, fines, injunctions, consent decrees and civil penalties;

 

·

unanticipated expenditures to address or defend such actions;

 

·

customer notifications or repair, replacement, refunds, recalls, detention or seizure of our products;

 

·

operating restrictions or partial suspension or total shutdown of production;

44


 

 

·

refusal of or delaying our requests for PMA approval of new products or modified products;  

 

·

withdrawing PMA approvals that have already been granted;

 

·

refusal to grant export approval for our products; and

 

·

criminal prosecution.

Any of these sanctions could have a material adverse effect on our reputation, business, results of operations and financial condition. Furthermore, our key component suppliers may not currently be or may not continue to be in compliance with all applicable regulatory requirements, which could result in our failure to produce our products on a timely basis and in the required quantities, if at all.

Outside the EEA and the United States, our products and operations are required to comply with standards set by the applicable regulatory authorities in each jurisdiction that we target for commercialization of our products, and those standards, types of evaluation and scope of review differ among such regulatory authorities. We intend to comply with the standards enforced by such regulatory authorities as needed to commercialize our products. If we fail to comply with any of these standards adequately, a regulatory authority may take adverse actions similar to those within the power of a notified body or competent authority or the FDA. Any such action may harm our reputation and business, and could have a material adverse effect on our business, results of operations and financial condition.

If our products, or the malfunction of our products, cause or contribute to a serious injury or a death, we will be subject to medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions.

Under the FDA medical device reporting regulations, medical device manufacturers are required to report to the FDA information that a device has or may have caused or contributed to a serious injury or death or has malfunctioned in a way that would likely cause or contribute to serious injury or death if the malfunction of the device or a similar device were to recur. All manufacturers placing medical devices in the market in the EEA are legally bound to report any serious or potentially serious incidents involving devices they produce or sell to the competent authority in whose jurisdiction the incident occurred. Were this to happen to us, the relevant competent authority would file an initial report, and there would then be a further inspection or assessment if there were particular issues. This would be carried out either by the competent authority or it could require that the notified body carry out the inspection or assessment.

Any such adverse event involving our products could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection or enforcement action. Any corrective action, whether voluntary or involuntary, will require the dedication of our time and capital, distract management from operating our business and may harm our business, results of operations and financial condition.

In the EEA, we must comply with the EU Medical Device Vigilance System. Under this system, incidents must be reported to the relevant authorities of the EEA countries, and manufacturers are required to take Field Safety Corrective Actions, or FSCAs, to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. An incident is defined as any malfunction or deterioration in the characteristics and/or performance of a device, as well as any inadequacy in the labeling or the instructions for use which, directly or indirectly, might lead to or might have led to the death of a patient or user or of other persons or to a serious deterioration in their state of health. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its European Authorized Representative to its customers and/or to the end users of the device through Field Safety Notices.

Our products may in the future be subject to product recalls. A recall of our products, either voluntarily or at the direction of governmental authorities, or the discovery of serious safety issues with our products, could have a significant adverse impact on us.

Governmental authorities, including the FDA, have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture. In the case of the FDA, the authority to require a recall must be based on an FDA finding that there is reasonable probability that the device would cause serious injury or death. In addition, non-U.S. governmental authorities have the authority to require the recall of our products in the event of material deficiencies or defects in design or manufacture. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found. A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, product failures, malfunctions, manufacturing errors, design or labeling defects or other deficiencies and issues. Recalls of any of our products would divert managerial and financial resources and would have an adverse effect on our reputation, results of operations and financial condition, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our

45


 

customers’ demands. We may also be subject to liability claims, be required to bear other costs, or take other actions that may have a negative impact on our future sales and our ability to reach profitability.

We rely on third parties to conduct our clinical trials and assist us with pre-clinical development. If these third parties do not perform as contractually required or expected, we may not be able to obtain regulatory clearance or approval for, or commercialize, our products.

We rely on third parties, including contract research organizations, medical institutions, clinical investigators and contract laboratories, to conduct our clinical trials and to assist in the preparation of our PMA submissions. If these third parties do not successfully carry out their contractual duties or regulatory obligations or meet expected deadlines, if these third parties need to be replaced, or if the quality or accuracy of the data they obtain is compromised due to the failure to adhere to our clinical protocols or regulatory requirements or for other reasons, our pre-clinical development activities or clinical trials may be extended, delayed, suspended or terminated, and we may not be able to obtain regulatory clearance or approval for, or successfully commercialize, our products on a timely basis, if at all, and our business, operating results and prospects may be materially and adversely affected. Furthermore, our third-party clinical trial investigators may be delayed in conducting our clinical trials for reasons outside of their control. We had previously engaged a contract research organization to monitor the clinical investigation sites, but terminated the engagement in January 2016 and are now relying on our own internal staff to monitor the clinical investigation sites. As stated above, we may determine to outsource this function again in the future.

The results of our clinical trials may not support our product claims or may result in the discovery of adverse side effects.

Our ongoing research and development, pre-clinical testing, clinical trial and post-market evaluation activities will be subject to extensive regulation and review by numerous governmental authorities, both in and outside of the United States. We are currently conducting a pivotal clinical trial under our IDE for our microlens and microlens inserter, to gather information about these products’ safety, efficacy or optimal use. In the future we may conduct clinical trials to support approval of new products. All such clinical studies must be conducted in compliance with applicable regulations or the applicable regulatory authorities may take enforcement action. The data collected from these clinical studies may ultimately be used to support market clearance for these products. Even if our clinical trials are completed as planned, we cannot be certain that their results will support our product claims or that the applicable regulatory authorities and notified bodies will agree with our conclusions regarding them. Success in pre-clinical studies and early clinical trials does not ensure that later clinical trials will be successful, and we cannot be sure that later trials will replicate the results of prior trials and pre-clinical studies. The clinical trial process may fail to demonstrate that our products are safe and effective for the proposed indicated uses, which could cause us to abandon a product and may delay development of others. Any delay or termination of our clinical trials will delay the filing of our product submissions and, ultimately, our ability to commercialize our products and generate revenues. It is also possible that patients enrolled in clinical trials will experience adverse side effects that are not currently part of the product’s profile.

We may be subject to enforcement action if we engage in improper marketing or promotion of our products.

The marketing and promotion of our products is subject to EEA Member States laws implementing the EU Medical Devices Directive, Directive 2006/114/EC concerning misleading and comparative advertising, and Directive 2005/29/EC on unfair commercial practices, as well as other EEA Member State legislation governing the advertising and promotion of medical devices. In addition, we are subject to EU and national Codes of Conduct. These laws and Codes of Conduct may limit or restrict the advertising and promotion of our products to the general public and may impose limitations on our promotional activities with healthcare professionals.

Further, once our products are approved, our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition of the promotion of unapproved, or off-label, use. If the FDA determines that our promotional materials or training constitutes promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine or criminal penalties. It is also possible that other federal, state or non-U.S. enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an off-label use. In that event, our reputation could be damaged and adoption of the products could be impaired. In addition, the off-label use of our products may increase the risk of product liability claims, which are expensive to defend and could divert our management’s attention, result in substantial damage awards against us, and harm our reputation.

46


 

Regulatory healthcare reforms may make it more difficult and costly for us to obtain regulatory approval or clearance of our products and to produce, market and distribute our products after approval or clearance is obtained.

FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of our products. Delays in receipt of, or failure to receive, regulatory approvals or clearances for our products would have a material adverse effect on our business, results of operations and financial condition.

Risks Related to Our Intellectual Property

We may become subject to third parties’ claims alleging infringement of their patents and proprietary rights or seeking to invalidate our patents or proprietary rights, or we may need to become involved in lawsuits to protect or enforce our patent portfolio, which could be costly, time consuming, delay or prevent the development and commercialization of our products, or put our patent portfolio and other proprietary rights at risk.

Litigation relating to infringement or misappropriation of patent and other intellectual property rights in the medical device industry is common. For example, we were previously a party to legal proceedings relating to the ownership of certain assets, including intellectual property. See “—Risks Related to Our Business—We were previously subject to certain legal proceedings relating to the ownership of certain assets, including intellectual property. As demonstrated by such proceedings, future claims regarding intellectual property may be costly and time consuming to defend and future claims may delay or prevent the development and commercialization of our products or place our patent portfolio and other proprietary rights at risk.” We may be subject to third-party claims in the future that would cause us to incur substantial expenses and which, if successful, could cause us to pay substantial damages. These damages potentially include increased damages and attorneys’ fees if we are found to have infringed such rights willfully. Further, if a patent infringement suit is brought against us, our research, development, manufacturing or sales activities relating to the product that is the subject of the suit may be delayed or terminated. As a result of patent infringement claims, or in order to avoid potential infringement claims, we may choose to seek, or be required to seek, a license from the claimant, which would be likely to include a requirement to pay license fees or royalties or both. These licenses may not be available on acceptable terms, or at all. Even if a license can be obtained on acceptable terms, the rights may be nonexclusive, which would give our competitors access to the same intellectual property rights. If we are unable to enter into a license on acceptable terms, we could be prevented from commercializing one or more of our products, or forced to modify such products, or to cease some aspect of our business operations, which could harm our business significantly.

U.S. and non-U.S. issued patents and pending patent applications controlled by third parties may relate to areas in which we are developing products. In such an instance, because all issued patents are entitled to a presumption of validity in many countries, including the United States and many European countries, issued patents held by others that claim our products or technology may limit our freedom to operate unless and until those patents expire or are declared invalid or unenforceable in a court of applicable jurisdiction, if we do not obtain a license or other right to practice the claimed inventions. Pending patent applications controlled by third parties may result in additional issued patents claiming our products and technology. In addition, the publication of patent applications occurs with a certain delay after the date of filing, so we may not be aware of all relevant patent applications of third parties at a given point in time. Further, publication of discoveries in the scientific or patent literature often lags behind actual discoveries, so we may not be able to determine whether inventions claimed in patent applications of third parties have been made before or after the date on which inventions claimed in our patent applications and patents have been made. If third parties prepare and file patent applications in the United States that also claim technology or therapeutics claimed by our patent applications or patents, we may have to participate in interference proceedings in the U.S. Patent and Trademark Office, or USPTO, to determine the priority of invention. An unfavorable outcome could require us to attempt to license rights from the prevailing party, or to cease using the related technology or developing or commercializing the related product candidate. We may also become involved in opposition proceedings in the European Patent Office regarding our intellectual property rights with respect to our products and technology.

Competitors may infringe our patent rights, or misappropriate or violate our other intellectual property rights. To counter infringement or unauthorized use, we may find it necessary to file infringement or other claims to protect our intellectual property rights. In addition, in any infringement proceeding brought by us against a third party to enforce our rights, a court may decide that a patent of ours is invalid or unenforceable, or may refuse to stop the other party from using the technology at issue on the basis that our patent does not cover the technology in question. An adverse result in any such litigation proceeding could put our patent protections at risk of being invalidated or interpreted narrowly, which could open us up to additional competition and have a material adverse effect on our business.

The cost to us of any patent litigation or other proceedings, such as interference proceedings, which are meant to determine who first invented any of the claims covered by the patent, even if resolved in our favor, could be substantial. Such litigation or proceedings could substantially increase our operating losses and reduce our resources available for development activities. We may not have

47


 

sufficient financial or other resources to adequately conduct such litigation or proceedings. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than us because of their subst antially greater financial resources. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments, and, if securities analysts or investors perceive these results to be negative, there c ould be a substantial adverse effect on the price of our ordinary shares. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketpla ce. Patent litigation and other proceedings may also require significant time and attention of management and technical staff, which may materially and adversely impact our financial position and results of operations. Furthermore, because of the substanti al amount of discovery required in connection with most intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation.

Our proprietary rights may not adequately protect our technologies and product candidates. If we are unable to protect our product candidates and our intellectual property rights, our position in the market may be materially and adversely affected.

Our commercial success may depend on our ability to obtain patents and maintain adequate protection for our technologies, intellectual property and product candidates in the United States and other countries. Our patent portfolio consists of certain U.S. patents, patents issued in other jurisdictions and patent applications in the United States and other jurisdictions relating to our technologies. There is no guarantee that any of our patent applications will result in issued patents, or that any patents, if issued, will include claims that are sufficiently broad to cover our existing products or products in development, or to provide meaningful protection from our competitors. We will be able to protect our proprietary rights from unauthorized use by third parties only to the extent that our proprietary technologies and future products are covered by valid and enforceable patents or are effectively maintained as trade secrets within our organization. If third parties disclose or misappropriate our proprietary rights, it may materially and adversely impact our position in the market.

We have applied for patents covering both our technologies and the products we are developing. We may fail to apply for patents on important technologies or products in development in a timely fashion, or at all. Our existing patents and any future patents we obtain may not be sufficiently broad to prevent others from using our technologies or from developing competing products and technologies. Moreover, the patent positions of many medical device companies are highly uncertain and involve complex legal and factual questions for which important legal principles remain unresolved. As a result, the validity and enforceability of our patent portfolio cannot be predicted with certainty. In addition, we cannot guarantee you that:

 

·

we were the first to make the inventions covered by our issued patents and our pending patent applications;

 

·

we were the first to file patent applications for these inventions;

 

·

others will not independently develop similar or alternative technologies or duplicate any of our technologies by inventing around our claims;

 

·

a third party will not challenge our proprietary rights, and, if challenged, that a court will hold that our existing or future patents are valid and enforceable;

 

·

any patents issued to us will cover our products as ultimately developed, or provide us with any competitive advantages;

 

·

we will develop additional proprietary technologies that are patentable; or

 

·

the patents of others will not have a material adverse effect on our business.

In addition, there are numerous recent changes to the patent laws and proposed changes to the rules of the USPTO which may have a significant impact on our ability to protect our technology and enforce our intellectual property rights. For example, on September 16, 2011, United States President Obama signed the America Invents Act which codifies several significant changes to the U.S. patent laws, including, among other things, changing from a “first to invent’ to a “first inventor to file” system, limiting where a patentee may file a patent suit, requiring the apportionment of patent damages, eventually eliminating interference proceedings while maintaining derivation actions, and creating a post-grant opposition process to challenge patents after they have issued. The effects of these changes are currently uncertain as the USPTO must still implement various regulations, and the courts have yet to address many of these provisions in the context of a dispute.

Restrictions on our patent rights relating to our products may limit our ability to prevent third parties from competing against us.

Our success will depend, in part, on our ability to obtain and maintain patent protection for our products, preserve our trade secrets, prevent third parties from infringing upon our proprietary rights and operate without infringing upon the proprietary rights of others. We cannot be certain that the claims in our patent applications to inventions covering our current or future products will be considered patentable by the USPTO and courts in the United States or by the patent offices and courts in countries outside of the United States.

48


 

We have filed a method-of-use patent application and may file additional method-of-use patent applications in the future. This type of patent protec ts the use of the product only for the specified method and does not prevent a competitor from making and marketing a product that is identical to our product for an indication that is outside the scope of the patented method. Moreover, even if these compe titors do not actively promote their product for our targeted indication, ophthalmic surgeons and ophthalmologists may use these products “off-label.” Although off-label use may infringe or contribute to the infringement of method-of-use patents, the pract ice is difficult to prevent or prosecute.

Patent applications in the United States and most other countries are confidential for a period of time until they are published, and publication of discoveries in scientific or patent literature typically lags actual discoveries by several months or more. As a result, we cannot be certain that we and the inventors of the issued patents and applications that we may in-license were the first to conceive of the inventions covered by such patents and pending patent applications or that we and those inventors were the first to file patent applications covering such inventions. Also, patent protection may lapse before we manage to obtain commercial value from patents that we may obtain, which might result in increased competition and materially and adversely affect our position in the market.

We may not be able to protect our intellectual property rights throughout the world.

Filing, prosecuting and defending patents on our products and technologies throughout the world would be prohibitively expensive. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, further, may export otherwise infringing products to territories where we have patent protection, but where enforcement is not as strong as that in the United States. These products may compete with our future products in jurisdictions where we do not have any issued patents and our patent claims or other intellectual property rights may not be effective or sufficient to prevent them from so competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in jurisdictions outside of the United States. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents and other intellectual property protection, which could make it difficult for us to stop the infringement of any patent issued to us or the marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in jurisdictions outside of the United States could result in substantial cost and divert our efforts and attention from other aspects of our business.

Obtaining and maintaining our patents depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

The USPTO and various non-U.S. governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other provisions during the patent process. There are situations in which noncompliance can result in abandonment or lapse of a patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, competitors may be able to enter the market earlier than would otherwise have been the case.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest and our business may be adversely affected.

Our registered or unregistered trademarks or trade names may be challenged, infringed, circumvented or declared generic or determined to be infringing on other marks. We may not be able to protect our rights to these trademarks and trade names, which we need to build name recognition by potential partners or customers in our markets of interest. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be materially and adversely affected.

We may be subject to claims that we or our employees or consultants have wrongfully used or disclosed alleged trade secrets of our employees’ or consultants’ former employers or their clients. These claims may be costly to defend and, if we do not successfully do so, we may be required to pay monetary damages and may lose valuable intellectual property rights
or personnel.

Although no claims against us are currently pending, we may be subject to claims that our employees or our company have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of the former employers of our employees. Litigation may be necessary to defend against these claims. If we fail in defending such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. A loss of key research personnel or their work product could hamper our ability to commercialize, or prevent us from commercializing, our products, which could severely harm our business.

49


 

Even if we are successful in def ending against these claims, litigation could result in substantial costs and be a significant distraction to management.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position would be harmed.

In addition to seeking patents for some of our technology and products, we will also rely on trade secrets, including unpatented know-how, technology and other proprietary information, to maintain our competitive position. We seek to protect our trade secrets, in part, by entering into non-disclosure and confidentiality agreements with parties who have access to them, such as our employees, contract manufacturers, consultants and other third parties. We also enter into confidentiality and invention or patent assignment agreements with our employees and consultants that obligate them to assign their inventions to us. Despite these efforts, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive and time-consuming, and the outcome is unpredictable. In addition, some courts inside and outside the United States are less willing or unwilling to protect trade secrets. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor, we would have no right to prevent them from using that technology or information to compete with us. If any of our trade secrets were to be disclosed to or independently developed by a competitor, our competitive position would be harmed.

Risks Related to Ownership of Our Ordinary Shares

We believe that we may be a passive foreign investment company, or PFIC, for U.S. federal income tax purposes, which could subject U.S. Holders to adverse U.S. federal income tax consequences.

Although neither we nor any of our subsidiaries was a PFIC in 2015 or any prior taxable year, we believe that we could be a PFIC for U.S. federal income tax purposes in the current taxable year and for foreseeable future taxable years. A PFIC generally is a foreign corporation if either at least (i) 75% of its gross income is “passive income” (the “PFIC Income Test”) or (ii) 50% of the gross value of its assets is attributable to assets that produce, or are held for the production of, passive income (the “PFIC Asset Test”). The proceeds from our initial public offering are a passive asset under these rules, and if substantial enough, may cause us to meet the PFIC Asset Test for 2016 (and in later years if we are not deploying the cash at a rate that would allow us to avoid meeting the PFIC Asset Test in such later years). Similarly, any earnings received from investments made with the proceeds from our initial public offering will be passive income under these rules, and if substantial enough, may cause us to meet the PFIC Income Test for 2016 and in later years. If we are a PFIC in any taxable year in which you hold shares and you are a U.S. Holder, we always will be a PFIC with respect to your stock ownership (subject to the QEF election discussed immediately below) unless you make an election to “purge” PFIC status as of the beginning of the first taxable year that we are not a PFIC (a year in which we do not meet the PFIC Income Test or the PFIC Asset Test) or the first taxable year that you make a QEF election, if such election is made after the first year in which you held our shares and in which we are a PFIC, all as discussed further below. If we are a PFIC and you are a U.S. Holder and do not make a Qualified Electing Fund election, or QEF election, with respect to us or a mark-to-market election with respect to our ordinary shares, you will be subject to adverse tax consequences, including deferred tax and interest charges with respect to certain distributions on our ordinary shares, any gain realized on a disposition of our ordinary shares and certain other events. The effect of these adverse tax consequences could be materially adverse to you. If you are a U.S. Holder and make a valid, timely QEF election for us, you will not be subject to those adverse tax consequences, but could recognize taxable income in a taxable year with respect to our ordinary shares in excess of any distributions that we make to you in that year, thus giving rise to so-called “phantom income” and to a potential out-of-pocket tax liability. If we are a PFIC with respect to any tax year, we will provide information to all electing shareholders needed to comply with the QEF election in time for each electing shareholder to make and maintain a timely QEF election, taking into account available extensions. If you are a U.S. Holder and make a valid, timely mark-to-market election with respect to our ordinary shares, you will recognize as ordinary income or loss in each year that we are a PFIC an amount equal to the difference between your basis in our ordinary shares and the fair market value of the ordinary shares, thus also possibly giving rise to phantom income and a potential out-of-pocket tax liability. Ordinary loss generally is recognized only to the extent of net mark-to-market gains previously included in income. We believe that one or more of our subsidiaries may be PFICs in the current taxable year and for foreseeable future taxable years based on their current and projected assets and income; also, we may form or acquire a subsidiary that is a PFIC in the future. In such event, U.S. Holders will also need to make the QEF election with respect to each such subsidiary in order to avoid the adverse tax consequences described above. We intend to provide on a timely basis all information necessary for U.S. Holders to make the QEF election with respect to any of our subsidiaries that may be classified as a PFIC in any tax year. U.S. Holders should also be aware that the mark-to-market election generally will not be available with respect to any of our subsidiaries that are a PFIC, rendering such election less beneficial to U.S. Holders than the QEF election. We will determine on an annual basis whether we will be a PFIC with respect to any taxable year. As noted above, if we are a PFIC in any taxable year in which you own shares and you are a U.S. holder, we will remain a PFIC with respect to your stock ownership unless you make a “purging election.” The resulting liability from such an election could be substantial.

50


 

If the IRS determines that we are not a PFIC, and you previously paid taxes pursuant to a QEF election or a mark-to -market election, you may pay more taxes than you legally owe.

If the IRS makes a determination that we are not a PFIC and you previously paid taxes pursuant to a QEF election or mark-to-market election, then you may have paid more taxes than you legally owed due to such election. If you do not, or are not able to, file a refund claim before the expiration of the applicable statute of limitations, you will not be able to claim a refund for those taxes.

An active, liquid and orderly trading market for our ordinary shares may not develop and you may not be able to resell your shares at or above the price that you paid for them.

Prior to our initial public offering, there was no public market for our ordinary shares. Although our ordinary shares are listed on the NASDAQ Global Market, an active, liquid, and orderly trading market for our shares may never develop or be sustained. If an active market for our ordinary shares does not continue to develop or is not sustained, it may be difficult for investors in our ordinary shares to sell shares without depressing the market price for the shares or to sell the shares at all.

Our share price may be volatile, and you may not be able to resell your shares at or above the price that you paid for them.

Since our initial public offering, the trading price of our ordinary shares has been volatile, and it is likely that the trading price of our ordinary shares will continue to be volatile. As a result of this volatility, investors may not be able to sell their ordinary shares at or above the price paid for the shares. The market price for our ordinary shares may be influenced by many factors, including:

 

·

announcements regarding the timing, progress or results of our clinical trials, post-market evaluation studies, research and development programs and commercialization efforts;

 

·

fluctuations in our quarterly financial results or the quarterly financial results of companies perceived to be similar to us;

 

·

actual or anticipated fluctuations in our key operating metrics, financial condition and operating results;

 

·

third-party publications reporting findings with respect to the efficacy and safety of our products;

 

·

difficulties in establishing relationships with refractive laser centers;

 

·

actual or anticipated changes in our growth rate;

 

·

announcements of technological innovations or new offerings by us or our competitors;

 

·

our announcement of actual results for a fiscal period that are worse than projected or expected or our announcement of revenue or earnings guidance that is lower than expected;

 

·

changes in estimates of our financial results or recommendations by securities analysts;

 

·

failure of any of our products to achieve or maintain market acceptance;

 

·

changes in market valuations of similar companies;

 

·

success of competitive products or services;

 

·

changes in our capital structure, such as future issuances of securities or the incurrence of debt;

 

·

announcements by us or our competitors of significant products or services, contracts, acquisitions or strategic alliances;

 

·

regulatory developments in the United States or other countries;

 

·

actual or threatened litigation involving us or our industry;

 

·

additions or departures of key personnel;

 

·

share price and volume fluctuations attributable to inconsistent trading volume levels of our shares;

 

·

further issuances of ordinary shares by us;

 

·

sales of ordinary shares by our shareholders;

 

·

repurchases or redemptions of ordinary shares; and

 

·

changes in general economic, industry and market conditions.

51


 

In addition, the stock market in general, and the market for medical device companies in particular, has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. Securities class action litigation has often be en instituted against companies following periods of volatility in the overall market and in the market price of a company’s securities. Any such litigation, if instituted against us, could result in very substantial costs, divert our management’s attentio n and resources, and harm our business, operating results and financial condition.

A sale of a substantial number of our ordinary shares into the public market could cause the market price of our ordinary shares to drop significantly, even if our business is doing well.

As of March 21, 2016, we had 13,371,445 ordinary shares issued and outstanding, of which 7,834,841 shares, or 58.6% of our total outstanding shares, are held by Richard Ressler and his affiliates, our controlling shareholder.

If our controlling shareholder, sells, or indicates an intention to sell, or if our controlling shareholder distributes our shares to its equity holders and those equity holders sell or indicate an intention to sell, substantial amounts of our ordinary shares in the public market, the trading price of our ordinary shares could decline. The perception in the market that these sales may occur could also cause the trading price of our ordinary shares to decline.

Our controlling shareholder is entitled to rights with respect to the registration of the ordinary shares that it holds under the Securities Act. See “Part II, Item 13. Certain Relationships and Related Party Transactions—Registration Rights Agreement.” Registration of these shares under the Securities Act would result in the shares becoming freely tradable without restriction under the Securities Act, except for shares purchased by affiliates.

On January 29, 2015, we filed a registration statement on Form S-8 registering the issuance of 1.8 million ordinary shares subject to options or other equity awards issued or reserved for issuance under our Presbia Incentive Plan. Shares registered under this registration statement on Form S-8 are available for sale in the public market subject to applicable vesting arrangements and the exercise of options, and, in the case of our affiliates, the restrictions of Rule 144. If these additional ordinary shares are sold, or if it is perceived that they will be sold, in the public market, the trading price of our ordinary shares could decline.

In addition, our controlling shareholder, our directors and our executive officers may establish programmed selling plans under Rule 10b5-1 of the Exchange Act with respect to shares that they hold or thereafter acquire, for the purpose of effecting sales of our ordinary shares. Any sales of ordinary shares by these shareholders, or the perception that those sales may occur, including the entry into such programmed selling plans, could have a material adverse effect on the trading price of our ordinary shares.

If securities or industry analysts do not publish or cease publishing research or reports about us, our business, or our market, or if they change their recommendations regarding our shares adversely, our share price and trading volume could decline.

The trading market for our ordinary shares will be influenced by the research and reports that industry or securities analysts may publish about us, our business, our market or our competitors. Securities and industry analysts do not currently, and may never, publish research on us. If no securities or industry analysts commence coverage of our company, our share price and trading volume would likely be negatively impacted. If any of the analysts who may cover us change their recommendation regarding our shares adversely, or provide more favorable relative recommendations about our competitors, our share price would likely decline. If any of the analysts who may cover us were to cease coverage or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our share price or trading volume to decline.

Our controlling shareholder has substantial control over us and beneficially owns a majority of our issued ordinary shares, which could delay or prevent a change in corporate control.

Richard Ressler, one of our directors and his affiliates, hold a majority of our issued ordinary shares. As of February 15, 2016, Mr. Ressler effectively controlled approximately 58.6% of the 13,371,445 shares outstanding. As a result, our controlling shareholder has the ability to control the outcome of matters submitted to our shareholders for approval, including the election of directors and any sale, merger, consolidation or sale of all or substantially all of our assets. In addition, our controlling shareholder has the ability to control or influence our management and our affairs. Furthermore, the concentration of voting power in our controlling shareholder may have an adverse effect on our share price.

We are an “emerging growth company” and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our ordinary shares less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act, and we are taking advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies,” including, but not

52


 

limited to, not being required to comply with the auditor atte station requirements of Section 404 of the Sarbanes Oxley Act for an extended period of time, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a no nbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. We may take advantage of these exemptions until we are no longer an “emerging growth company.” We will remain an “emerging g rowth company” until December 31, 2020, although if the market value of our ordinary shares that are held by non-affiliates exceeds $700 million as of any June 30 before that time and in certain other circumstances, we would cease to be an “emerging growth company” as of the following December 31. We cannot predict if investors will find our ordinary shares less attractive because we may rely on these exemptions. If some investors find our ordinary shares less attractive as a result, there may be a less act ive trading market for our ordinary shares.

We are a “controlled company” under the NASDAQ listing rules, and as such we are entitled to exemption from certain NASDAQ corporate governance standards, and you may not have the same protections afforded to shareholders of companies that are subject to all NASDAQ corporate governance requirements.

Richard Ressler and his affiliates hold a majority of the voting power of our issued ordinary shares. As a result, we are a “controlled company” within the meaning of the corporate governance rules of NASDAQ. Under these rules, a controlled company may elect not to comply with certain corporate governance requirements, including: the requirement that we have a compensation committee that is composed entirely of independent directors; the requirement that we have a nominating/corporate governance committee that is composed entirely of independent directors; and the requirement that a majority of the members of our Board be independent directors. We are utilizing and intend to continue to utilize some or all of those exemptions. Accordingly, you will not be similarly situated to shareholders of companies that are subject to all of the corporate governance requirements of NASDAQ. Our status as a controlled company could make our ordinary shares less attractive to some investors or otherwise harm our stock price.

We do not currently intend to pay dividends on our ordinary shares and, consequently, your ability to achieve a return on your investment will depend on appreciation in the price of our ordinary shares.

We have never declared or paid any cash dividends on our ordinary shares and do not intend to do so for the foreseeable future. We currently intend to retain all available funds and any future earnings to support the operation of, and to finance the growth and development of, our business. Any future determination to declare cash dividends will be made at the discretion of our Board, subject to compliance with applicable laws (including the Irish Companies Acts, which require Irish companies to have “profits available for distribution” before they can pay dividends) and covenants under credit facilities, which may restrict or limit our ability to pay dividends and will depend on our financial condition, operating results, capital requirements, general business conditions and other factors that our Board may deem relevant. As a result, any return to shareholders will be limited to the appreciation, if any, of their ordinary shares.

Provisions contained in our articles of association, as well as provisions of Irish law, could impair a takeover attempt.

Our articles of association and certain provisions of the Irish Companies Acts contain provisions that could have the effect of delaying or preventing changes in control or changes in our management without the consent of our Board.

There are a number of approaches for acquiring an Irish public limited company, including a court-approved scheme of arrangement under the Irish Companies Acts, through a tender offer by a third party under the Irish Takeover Panel Act 1997 (as amended) and the takeover rules made thereunder (the Irish Takeover Rules), which we refer to herein as the Irish Takeover Rules, and by way of a merger with a company incorporated in the EEA under the European Communities (Cross-Border Mergers) Regulations 2008 (as amended). Each method requires shareholder approval or acceptance and different thresholds apply.

The Irish Takeover Rules will govern a takeover or attempted takeover of our company by means of a court-approved scheme of arrangement or a tender offer. These Rules contain detailed provisions for takeovers including as to disclosure, dealing and timetable. The Irish Takeover Rules could discourage an investor from acquiring 30% or more of the outstanding ordinary shares of our company unless such investor were prepared to make a bid to acquire all outstanding ordinary shares.

Our Board may be limited by the Irish Takeover Rules in its ability to defend an unsolicited takeover attempt.

Under the Irish Takeover Rules, we will not be permitted to take certain actions that might “frustrate” an offer for our ordinary shares once our Board has received an offer, or has reason to believe an offer is or may be imminent, without the approval of more than 50% of shareholders entitled to vote at a general meeting of our shareholders and/or the consent of the Irish Takeover Panel. This could limit the ability of our Board to take defensive actions even if it believes that such defensive actions would be in the best interests of our company.

53


 

Irish law differs from the laws in effect in the U.S. and may afford less protection to holders of our securities.

It may not be possible to enforce court judgments obtained in the U.S. against us in Ireland based on the civil liability provisions of the U.S. federal or state securities laws. In addition, there is some uncertainty as to whether the courts of Ireland would recognize or enforce judgments of U.S. courts obtained against us or our directors or officers based on the civil liabilities provisions of the U.S. federal or state securities laws or hear actions against us or those persons based on those laws. We have been advised that the United States currently does not have a treaty with Ireland providing for the reciprocal recognition and enforcement of judgments in civil and commercial matters. Therefore, a final judgment for the payment of money rendered by any U.S. federal or state court based on civil liability, whether or not based solely on U.S. federal or state securities laws, would not automatically be enforceable in Ireland.

As an Irish company, we are governed by the Irish Companies Acts, which differ in some material respects from laws generally applicable to U.S. corporations and shareholders, including, among others, differences relating to interested director and officer transactions and shareholder lawsuits. Likewise, the duties of directors and officers of an Irish company generally are owed to the company only. Shareholders of Irish companies generally do not have a personal right of action against directors or other officers of the company and may exercise such rights of action on behalf of the company only in limited circumstances. Accordingly, holders of our ordinary shares may have more difficulty protecting their interests than would holders of shares of a corporation incorporated in a jurisdiction of the United States.

The rights of our shareholders may differ from the rights typically offered to shareholders of a U.S. corporation and these differences may make our ordinary shares less attractive to investors.

We are incorporated under Irish law and, therefore, certain of the rights of holders of our shares are governed by Irish law, including the provisions of the Irish Companies Acts, and by our articles of association. These rights differ in certain respects from the rights of shareholders in typical U.S. corporations and these differences may make our ordinary shares less attractive to investors. The principal differences include the following:

 

·

under Irish law, dividends may only be declared if we have, on an individual entity basis, profits available for distribution, within the meaning of the Irish Companies Acts;

 

·

under Irish law, each shareholder generally has preemptive rights to subscribe on a proportionate basis to any issuance of shares for cash. Under U.S. law, shareholders generally do not have preemptive rights unless specifically granted in the certificate of incorporation or otherwise. Pre-emption rights may be disapplied under Irish law for a maximum renewable five-year period by Irish companies by way of a provision in their articles of association or special resolution of their shareholders, which is an option we have availed ourselves of prior to the consummation of our initial public offering;

 

·

under Irish law, certain matters require the approval of holders of 75% of the votes cast at a general meeting of our shareholders, including amendments to our articles of association. This may make it more difficult for us to complete certain types of corporate actions deemed advisable by our Board. Under U.S. law, generally only majority shareholder approval is required to amend the certificate of incorporation or to approve other
significant transactions;

 

·

under Irish law, a bidder seeking to acquire us would need, on a tender offer, to receive shareholder acceptance in respect of 80% of our outstanding shares. If this 80% threshold is not achieved in the offer, under Irish law, the bidder cannot complete a “second step merger” to obtain 100% control of us. Accordingly, acceptance of an offer by 80% of our outstanding shares will likely be a compulsory acquisition of the non-accepting shares or a condition in a tender offer to acquire us, not 50% as is more common in tender offers for corporations organized under U.S. law; and

 

·

under Irish law, shareholders may be required to disclose information regarding their equity interests upon our request, and the failure to provide the required information could result in the loss or restriction of rights attaching to the shares, including prohibitions on the transfer of the shares, as well as restrictions on voting, dividends and other payments. Comparable provisions generally do not exist under U.S. law.

A future transfer of your ordinary shares, other than one effected by means of the transfer of book entry interests in DTC, may be subject to Irish stamp duty.

Transfers of ordinary shares effected by means of the transfer of book entry interests in the Depository Trust Company, or DTC, should not be subject to Irish stamp duty. It is anticipated that the majority of ordinary shares will be traded through DTC through brokers who hold such ordinary shares on behalf of customers through DTC. This exemption should be available because our ordinary shares will be traded on a recognized stock exchange in the United States. However, if you hold your ordinary shares as of record rather than beneficially through DTC or through a broker that holds your ordinary shares through DTC, any transfer of your ordinary shares could be subject to Irish stamp duty (currently at the rate of 1% of the higher of the price paid or the market value of the

54


 

ordinary shares acquired). Payment of Irish stamp dut y is generally a legal obligation of the transferee. The potential for stamp duty to arise could adversely affect the price of our ordinary shares.

 

 

Item 1B. Unresolved Staff Comments .

None.

Item 2. Properties .

Our operations are currently conducted at three leased facilities. We lease or sublease an aggregate of approximately 14,500 square feet of office, laboratory and manufacturing space in Irvine, California. The lease covering approximately two-thirds of this space expires in May 2017 and the sublease covering approximately one-third of this spaces expires in July 2016. In addition, we lease approximately 538 square feet of office and storage space in Amsterdam, the Netherlands, and we lease approximately 610 square feet of office and storage space in Dublin, Ireland. Our corporate headquarters are currently located at our Dublin location.

We believe that our current facilities are suitable and adequate to meet our current needs.

Item 3. Legal Proceedings .

We are not aware of any pending or threatened legal proceeding against us that could have a material adverse effect on our business, operating results or financial condition. However, the medical device industry is characterized by frequent claims and litigation, including claims regarding patent and other intellectual property rights as well as improper hiring practices. As a result, we may be involved in various legal proceedings from time to time.

Item 4. Mine Safety Disclosures .

Not applicable.

 

 

Part II

Item 5. Market for Registrant’s Common Equit y, Related Shareholder Matters and Issuer Purchases of Equity Securities .

Market Information for Ordinary Shares

 

Our common stock began trading on The NASDAQ Global Market on January 29, 2015 under the symbol “LENS.” Prior to such time, there was no public market for our common stock. The following table sets forth the high and low sales prices per share of our common stock as reported on The NASDAQ Global Market for the period indicated.

 

 

 

High

 

Low

Year Ended December 31, 2015

 

 

 

 

First Quarter (commencing on January 29, 2015)

 

$9.32

 

 

 

$5.52

Second Quarter

 

$9.38

 

 

 

$6.66

Third Quarter

 

$8.00

 

 

 

$4.99

Fourth Quarter

 

$6.89

 

 

 

$3.62

 

The last reported sales price of our ordinary shares as reported on The NASDAQ Global Market on March 14, was $4.56 per share

Shareholders

As of March 14, 2016, there were twenty-two registered holders of record of our ordinary shares. This number does not reflect the beneficial holders of our ordinary shares who hold shares in street name through brokerage accounts or other nominees.

Dividend Policy

We have never declared or paid any cash dividends on our ordinary shares. We currently intend to retain all available funds and any future earnings to support our operations and finance the growth and development of our business. We do not intend to pay cash

55


 

dividends on our ordinary shares for the foreseeable future. Any future determination relating to our dividend policy will be made at the discretion of our Board and will depend on, among other factors, our results of operations, financial condition, capital requirements, contractual restrictions, business prospects and other factors our Board may deem relevant.

Securities Authorized for Issuance Under Equity Compensation Plans

The following table provides information as of December 31, 2015 regarding shares of our common stock that may be issued under the Presbia Incentive Plan (the “Plan”).

 

 

 

 

 

 

 

 

 

 

 

 

 

Equity Compensation Plan Information

 

 

 

Number of securities
to be issued upon exercise
of outstanding options
and rights(1)

 

Weighted Average
exercise price of
outstanding options
and rights

 

Number of securities
remaining available for
future issuance under equity
compensation plan
(excluding securities
referenced in column (a))

 

Equity compensation plans approved by security holders

 

1,084,583

 

 

$9.73

 

 

 

685,858

 

Equity compensation plans not approved by security holders

 

 

 

 

 

 

 

        Total

 

1,084,583

 

 

$9.73

 

 

 

685,858

 

(1) Does not include restricted shares of 29,559 issued during 2015 as such shares are already reflected in our outstanding shares. 

Use of Proceeds

On January 28, 2015, our registration statement on Form S-1 (File No 333-194713), as amended, was declared effective by the SEC for our initial public offering. Upon the closing of our initial public offering on February 3, 2015, we sold 4,166,667 ordinary shares, $0.001 par value per share, at a public offering price of $10.00 per share, for an aggregate public offering price of $41.7 million. Jefferies LLC acted as the sole book-running manager for the offering.

As a result of the initial public offering, we received net proceeds of approximately $36.8 million, after deducting approximately $2.9 million of underwriting discounts and commissions and estimated offering expenses of approximately $2.0 million payable by us. None of such payments were direct or indirect payments to any of (i) our directors or officers or their associates, (ii) persons owning 10 percent or more of our common stock, or (iii) our affiliates.

There has been no material change in the planned use of proceeds from our initial public offering from that described in the final prospectus related to the offering, which we filed with the SEC on January 29, 2015.

 

 

56


 

Item 6. Selected Financial Data.

Under SEC rules and regulations, as a smaller reporting company, we are not required to provide the information otherwise required by this item.

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

You should read the following discussion and analysis of our financial condition and results of operations together with our financial statements and the related notes appearing elsewhere in this Annual Report on Form 10-K. Some of the information contained in this discussion and analysis or set forth elsewhere in this Annual Report on Form 10-K, including information with respect to our plans and strategy for our business and related financing, includes forward-looking statements that involve risks and uncertainties. You should read “Cautionary Note Regarding Forward-Looking Statements” and “Part I, Item 1A. Risk Factors” of this Annual Report on Form 10-K for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.

Overview

We are an ophthalmic device company which has developed and is currently marketing a proprietary optical lens implant for treating presbyopia, the age-related loss of the ability to focus on near objects. Our microlens is a miniature lens designed to be surgically implanted in a patient’s eye to improve that patient’s ability to see objects at close distances. Our current strategy is to continue to commercialize our microlens in certain strategic countries where we currently have marketing approval and to continue to seek to obtain marketing approval in other key markets, including the United States. Our goal is to become a leading provider of corneal inlay presbyopia-correcting treatment worldwide.

Although reading glasses and contact lenses have historically been, and remain, the most common solution for presbyopia, there are significant drawbacks associated with these approaches, as well as with alternative surgical approaches. We believe that our microlens provides an alternative solution to those presbyopic individuals who desire greater freedom from glasses and wish to avoid the daily maintenance and other complications of contact lenses. We believe that our microlens can be both an effective standalone solution for presbyopia and an effective complementary solution that can be used in conjunction with certain other surgical approaches that are used to treat vision disorders other than presbyopia.

We are an ophthalmic device company with a limited operating history. We are not profitable and have incurred losses in each year since our formation. We have reported recurring net losses and negative cash flow from operating activities since inception and, as of December 31, 2015, we had an accumulated deficit of $55.5 million. We expect to continue to incur significant losses for the foreseeable future.

Factors Affecting our Industry

The medical device industry in general, and the ophthalmic medical device market in particular, are highly competitive. In order for us to succeed in this market as a development stage company, we must:

 

·

incur substantial expenditures to obtain regulatory approvals necessary to commence marketing our products in particular jurisdictions;

 

·

develop a commercialization strategy that is responsive both to the needs of laser centers and ophthalmic surgeons and to our own requirements and limitations;

 

·

invest in our future by continuing to advance our technology and improve our microlens, our microlens inserter and other auxiliary products;

 

·

focus on, and respond to, the feedback we receive in post-operative situations and comply with various post-marketing reporting obligations; and

 

·

invest in our infrastructure, to assure that if we are successful in gaining necessary regulatory approvals, commercializing our products and advancing our technology, we will be able to grow our business accordingly.

We expect to compete against companies that develop corneal inlay surgical solutions for presbyopia, companies that offer alternative surgical methodologies for the treatment of presbyopia, including monovision, multifocal and accommodating approaches, and companies that promote reading glasses and/or contact lenses as approaches for treating presbyopia. At any time, our known competitors and other potential market entrants, many of which have greater resources and experience in the ophthalmic medical device market than we have, may develop new devices or treatment alternatives that may compete directly with our products. In

57


 

addition, they may gain a market advantage by developing and patenting competitive products or processes earlier than we can or by obtaining regulatory approvals/clearances or market registrations more rapid ly than we can.

The competitive nature of the market, the high degree of government regulation, the importance of technological innovation and the significance that most people place on near vision combine to elevate the risks facing any development stage company seeking to enter our market.

Factors Affecting our Revenues

We believe that the principal factors affecting our revenues will include:

 

·

our ability to obtain pre-market approval for our microlens and microlens inserter in the United States and, if we are able to obtain that approval, the time that it will take us to obtain that approval and the associated expenses;

 

·

our ability to obtain necessary regulatory approvals in other jurisdictions that we target to commercialize our products, and, if we are able to obtain those approvals, the time that it will take us to obtain those approvals and the associated expenses;

 

·

the growth in the worldwide presbyopic population and the increasing needs of significant elements of that population to view small print on a variety of electronic devices;

 

·

our ability to maintain the regulatory approvals that we currently possess and may acquire in the future and the associated expense;

 

·

our ability to obtain commercialization commitments from laser centers and individual surgeons in the jurisdictions in which we are authorized to market our products;

 

·

our ability to gain acceptance by ophthalmic surgeons, to train those ophthalmic surgeons and to cause those ophthalmic surgeons to train other ophthalmic surgeons; and

 

·

the effects that our competitors will have on us, in terms of our ability to meet price competition, to respond to product announcements and developments by others and to respond to other developments in the market.

Factors Affecting Our Expenses

Our expenses are principally driven by the following factors:

 

·

Cost of goods sold . At present, our cost of goods sold relates principally to amounts that we pay to our microlens supplier in Israel and our OEM microlens inserter supplier in the United States. Although we have developed manufacturing capacity in our California facility, we have used, and expect to continue to use all output from that facility for evaluation purposes and for clinical trials unless there is an alternative use for that facility or we receive the necessary governmental approvals to sell products that we manufacture in the United States. Until there is an alternative use for that facility or we receive those approvals, the direct manufacturing costs that we incur in producing products in the United States will be included within research and development expenses. When and if we receive those approvals and manufacture products in the United States for sale in the United States, our cost of goods sold will also include raw material costs, labor expenses and other expenses that we incur to manufacture our products. We do not expect to increase production at our California facility significantly beyond what would be required for the clinical trials unless and until we receive approval of our PMA application from the FDA. Our costs of goods sold are directly impacted by the terms of our supply agreements, which may obligate us to pay additional costs if we do not reach our suppliers’ production expectations, and by shipping and handling expenses. When and if we ourselves manufacture products for sale, our costs of goods sold will also be directly impacted by:

 

·

the number of employees that will be engaged in manufacturing and the wages and benefits, including stock-based compensation, that we will pay to those employees;

 

·

to the extent we invest in fixed assets associated with manufacturing activities, the depreciation expenses associated with those fixed assets;

 

·

the costs we incur to purchase raw materials;

 

·

inventory write-downs for excess or obsolete inventory;

 

·

the costs of non-production materials; and

 

·

lease expenses associated with our production facilities.

58


 

 

·

Research and development. Our research and development expenses consist of the expenses we incur to develop our products, to pursue patent and trade mark protection, to respond to technological challenges, to conduct clinical trials and post-market evaluation studies and to pursue governmental approvals. We expect to continue to expense all research and development costs as they are incurred with the e xception of capital expenditures that would have alternative uses. Our research and development expenses consist of employee salaries and related benefits, including stock-based compensation, third-party contract costs relating to research, manufacturing, preclinical studies, clinical trial activities and post-market evaluation studies, and allocated facility costs. We expect that our research and development expenses related to the ongoing clinical trials will decline in 2016 relative to 2015, as we have c ompleted the subject treatment phase of our U.S. staged pivotal clinical trial. The process of conducting preclinical studies and clinical trials necessary to obtain regulatory approval is costly and time consuming. We may not succeed in achieving certain marketing approvals that we seek for our products. The probability of success of each product may be affected by numerous factors, including preclinical data, clinical data, post-market and third-party evaluation studies, competition, manufacturing capabil ity and commercial viability.  

As of December 31, 2015, we had nine employees directly engaged in research and development for at least a portion of their responsibilities. We also engage outside advisors and counsel to assist in development projects and in prosecuting patent and trademark applications. Our research and development expenses will be directly impacted by:

 

·

the number of employees that will be engaged in research and development and the wages and benefits, including stock-based compensation, that we will pay to those employees;

 

·

the extent to which we will rely on outside sources to provide research and development assistance and the fees charged to us for those services;

 

·

the extent to which we pursue clinical trials, our ability to sign-up patients for those trials and retain patients in those trials, the outcomes arising from those trials and the regulatory responses to those trials;

 

·

the extent to which we pursue post-market evaluation studies, our ability to sign-up patients for those studies and retain patients in those studies, the outcomes arising from those studies and the regulatory responses to those studies;

 

·

the results of third-party evaluation studies;

 

·

the size and geographical scope of the patent and trademark portfolio and the maintenance fees required to maintain that portfolio; and

 

·

to the extent that we invest in fixed assets associated with our clinical trials, the depreciation expenses associated with those fixed assets.

 

·

Sales and marketing. Our sales and marketing expenses consist of costs associated with our sales efforts. Our commercialization strategy involves engaging laser centers to ultimately sponsor our products after gaining confidence in our products and processes. We will train the staff of these centers in practice integration, support patient recruitment with direct response advertising campaigns, surgical performance, patient management and post-operative reporting, enabling the centers to perform a substantial portion of the commercialization process on their own. If we are successful in implementing this strategy, our principal expenses will be in furnishing training teams to laser centers and then arranging for a smaller Presbia team to remain available to the center once the center is able to perform the necessary skills on its own. We have incurred, and will continue to incur, expenses in connection with conferences, seminars and trade shows that we attend and/or sponsor. We may also enter into marketing campaigns with participating laser centers, which will add to our sales and marketing expenses. Our sales and marketing expenses will be directly impacted by:

 

·

the volume of our revenues;

 

·

the number of countries in which we obtain authorization to market our products and the associated regulations;

 

·

the number of laser centers that will be willing to partner with us;

 

·

the extent to which we are successful in training ophthalmic surgeons to train other ophthalmic surgeons;

 

·

the extent to which we will be required to develop a distributorship network in countries that mandate that approach;

 

·

the number of employees that will be engaged in sales and marketing and the wages and benefits, including stock-based compensation, that we will pay to those employees;

59


 

 

·

the extent to which we ident ify advertising opportunities that we believe are likely to produce revenue growth; and  

 

·

the extent to which we continue to participate in conferences, seminars and similar opportunities.

 

·

General and administrative expenses. Our general and administrative expenses consist of finance, human resources, purchasing and information technology services, other administrative services, foreign exchange costs and expenses associated with planning for and implementing the Reorganization Transactions. To date, our general and administrative expenses have been our largest single cost element, reflecting our approach of concentrating our own efforts on research and development and contracting with third-parties, principally affiliated entities and outside professionals, to provide administrative services to us. Over time, we expect to build our own infrastructure and perform more of these services in-house, in which case our general and administrative expenses will relate more to our own payroll than to the amount that we pay to third-parties. Furthermore, we are incurring additional expenses as a result of operating as a public company, including costs to comply with the rules and regulations applicable to companies listed on The NASDAQ Global Market and costs related to compliance and reporting obligations pursuant to the rules and regulations of the SEC. In addition, as a public company, we are incurring increased expenses related to additional insurance, investor relations and other increases related to needs for additional human resources and professional services. Our general and administrative expenses will be directly impacted by:

 

·

the extent to which we purchase services from third-parties;

 

·

the costs we incur to build an infrastructure capable of performing services in-house;

 

·

the number of employees that will be engaged in general and administrative functions and the wages and benefits, including stock-based compensation, that we will pay to those employees;

 

·

the geographical breadth of our company; and

 

·

the extent to which costs associated with being a public company increase over time.

 

·

Interest expense . From inception through January 15, 2015, our interest expense reflects the interest charges that we have incurred through borrowings from Presbia Holdings and, prior to 2009, Orchard Investments, LLC (which is wholly-owned, directly or indirectly, by our director, Richard Ressler, his immediate family and trusts established for his immediate family). From inception through November 30, 2014, Presbia Holdings and Orchard Investments, LLC funded the cash that we required to operate our business, at an interest expense of 15% per annum, compounding daily. From November 2014 to our initial public offering consummated in January 2015, we funded our operations through borrowings from Presbia Holdings, at an interest rate equal to the then applicable monthly federal rate of interest for short-term loans, adjusted monthly, compounding daily. As of January 15, 2015, all such debt has been converted to our equity. The amount of interest expense that we incur in the future will be directly impacted by:

 

·

our need for external debt financing;

 

·

the terms we will be able to attract when and if we require external debt financing; and

 

·

our ability, which cannot be assured, to attract equity financing as an alternative to debt financing.

Critical Accounting Polices and Estimates

Our financial statements are prepared in accordance with generally accepted accounting principles in the United States, or GAAP. The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, costs and expenses and related disclosures. We have based and will base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. In many instances, we could have reasonably used different accounting estimates, and in other instances changes in the accounting estimates are reasonably likely to occur from period to period. Accordingly, actual results could differ significantly from the estimates made by our management. To the extent that there are material differences between these estimates and actual results, our future financial statement presentation, financial condition, results of operations and cash flows will be affected. We believe that the accounting policies discussed below are critical to understanding our historical and future performance, as these policies relate to the more significant areas involving management’s judgments and estimates.

Emerging Growth Company Status

The Jumpstart Our Business Startups Act of 2012, or the JOBS Act, permits an “emerging growth company” such as us to take advantage of an extended transition period to comply with new or revised accounting standards applicable to public companies. We

60


 

have chosen to “opt out” of this provision and, as a result, we will comply with new or revised accounting standards as required when they are adopted. This decision to opt out of the extended trans ition period under the JOBS Act is irrevocable.

Revenue Recognition

We recognize revenue when there is persuasive evidence that an arrangement exists with our customers, selling prices are fixed or determinable, title or risk of loss has passed, and collection is reasonably assured. Revenue is recognized upon shipment and payments are either received in advance, or net 30 days for lenses or net 14 days for accessories. Distributor arrangements include certain perfunctory acceptance provisions and a one-year warranty, from the date of shipment, that products are free from defects in material workmanship. Under such provisions customers may reject shipments via written notifications ranging from 14-45 days or exchange defective product under warranty for the same non-defective product. We have not had any significant rejected shipments or warranty claims. We do not grant price concessions to our distributors.

In 2012, we changed our commercialization strategy from exclusively using distributors to also targeting refractive laser centers equipped with femtosecond lasers, except in countries that require the use of distributors or sales representatives. We recognize revenue from laser centers based upon an analysis of the terms of each customer arrangement and upon determination that persuasive evidence of an arrangement exists, selling prices are fixed or determinable, title or risk of loss has passed, and collection is reasonably assured. Revenues from laser centers during the years ended December 31, 2015 and 2014 were not material.

Stock-Based Compensation

We record share-based compensation in the statements of operations as expense, based on the estimated grant date fair value of our share-based awards, whereby such fair values are amortized to expense over the requisite service period. Our share-based awards are currently comprised of common stock options and restricted awards granted under our various plans. The fair value of our common stock options is generally estimated on the grant date using the Black-Scholes-Merton, or BSM, option-pricing formula. While utilizing the BSM model meets established requirements, the estimated fair values generated by the model may not be indicative of the actual fair values of our share-based awards as it does not consider certain factors important to those awards to employees and non-employees, such as continued employment and periodic vesting requirements as well as limited transferability. The determination of the fair value of share-based awards utilizing the BSM model is affected by our stock price and a number of assumptions, including the expected term, expected volatility, risk-free interest rate and expected dividend yields. The expected term of our stock options for those options granted to employees is generally estimated using the simplified method, as permitted by guidance issued by the Securities and Exchange Commission, or SEC. For those options granted to non-employees, the expected term of the options is the remaining contractual term. The expected volatility is based on the historical volatility of our stock price. Due to our limited stock price history during 2015 and no stock price availability during 2014, we relied upon the historical volatilities using a peer group average. The risk-free interest rate assumption is based on the U.S. Treasury interest rates appropriate for the expected term of our stock options and stock purchase rights. The fair value of our restricted stock awards are based on the closing market price of our common stock on the date of grant. If factors change and we employ different assumptions, share-based compensation expense may differ significantly from what we have recorded in the past. If there are any modifications or cancellations of the underlying unvested share-based awards, we may be required to accelerate, increase or cancel any remaining unearned share-based compensation expense.

Research and Development Expenses

We recognize research and development expenses as they are incurred. With respect to capital expenditures for property and equipment used in conducting research and development activities, these costs are generally capitalized on the balance sheet as part of property and equipment and depreciated over their useful lives to research and development expense provided these assets have future alternative uses.

During 2014 and 2015, we incurred costs in connection with the FDA staged-enrollment pivotal clinical trial, which is expected to continue into 2018 or possibly further. We incurred costs for patient recruiting, acquisition of clinical test equipment to be used in the trial, outside experts to read and interpret the results of the studies, third party costs to monitor the investigational sites and perform data collection activities and surgeon and patient fees in connection with surgical procedures and follow-up visits. Our policy with respect to the recognition of these expenses is to record such expenses as research and development expense in the period in which the services are provided. We will evaluate the purchases of clinical test equipment, on a case by case basis, to determine if there exists an alternative use for the equipment following the clinical trial. In the event we determine that there is no alternative use for the test equipment, then that cost will be expensed as part of research and development expense in the period in which we take title to the equipment from the supplier.

61


 

Impairment of Long-Lived Assets

We review the recoverability of long-lived and finite-lived intangible assets when circumstances indicate that the carrying amount of assets might not be recoverable. This evaluation compares the carrying value of the long-lived asset to the undiscounted cash flow projections associated with an asset or group of assets. In the event undiscounted cash flow projections indicate impairment, we would record an impairment loss on the statements of operations in the period in which the impairment occurred and adjust the carrying value of the asset or group of assets to its fair value.

Income Taxes

Deferred income tax assets and liabilities are recorded for the expected future tax consequences of temporary differences between the financial statement carrying amounts and the income tax basis of assets and liabilities. A valuation allowance is recorded against all of our net deferred tax asset balance due to uncertainties related to the realizability of our deferred tax assets as a result of our history of operating losses.

Segment Information

In accordance with generally accepted accounting principles, we identify operating segments as components or elements of an enterprise about which separate discrete financial information is available for evaluation by the chief operating decision-maker in making decisions regarding resource allocation and assessing performance. To date, the Company has viewed its operations and manages its business as one segment.

Results of Operations

Comparison of the Years Ended December 31, 2015 and 2014 (in thousands)

 

 

 

Year Ended December 31,

 

 

Change

 

 

 

2015

 

 

2014

 

 

$000's

 

 

%

 

Revenues

 

$

153

 

 

$

161

 

 

$

(8

)

 

 

-5

%

Cost of goods sold

 

 

163

 

 

 

61

 

 

 

102

 

 

 

167

%

Gross profit (loss)

 

 

(10

)

 

 

100

 

 

 

(110

)

 

 

-110

%

Operating expenses:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

7,935

 

 

 

4,243

 

 

 

3,692

 

 

 

87

%

Sales and marketing

 

 

2,706

 

 

 

1,652

 

 

 

1,054

 

 

 

64

%

General and administrative

 

 

7,479

 

 

 

7,577

 

 

 

(98

)

 

 

-1

%

Total operating expenses

 

 

18,120

 

 

 

13,472

 

 

 

4,648

 

 

 

35

%

Operating loss

 

 

(18,130

)

 

 

(13,372

)

 

 

(4,758

)

 

 

36

%

Interest expense, net

 

 

 

 

 

2,288

 

 

 

(2,288

)

 

 

-100

%

Other (income) expense

 

 

12

 

 

 

(6

)

 

 

18

 

 

 

-300

%

Loss before income tax provision

 

 

(18,142

)

 

 

(15,654

)

 

 

(2,488

)

 

 

16

%

Income tax provision

 

 

19

 

 

 

10

 

 

 

9

 

 

 

90

%

Net loss

 

$

(18,161

)

 

$

(15,664

)

 

$

(2,497

)

 

 

16

%

 

Revenue

Revenue for the year ended December 31, 2015 was $153,000 as compared to $161,000 in 2014. Revenues were insignificant in both years consistent with our strategy to commercialize our microlens product in only selected markets outside the United States. Until such time that we can be assured that our commercialization strategy, marketing activities and execution plans are validated in selected key markets, we will not attempt to commercialize in every market in which we are currently approved to do so.

Cost of Goods Sold

Cost of goods sold was $163,000 in the year ended December 31, 2015 as compared to $61,000 in the year ended December 31, 2014. During fiscal year 2015, cost of goods sold primarily consisted of $169,000 for provision of inventory obsolescence. During the year ended December 31, 2014, cost of goods sold consisted of $12,000 for cost of units shipped to customers, $61,000 for provision of inventory obsolescence, partially offset by $12,000 for favorable inventory adjustments.

62


 

Research and Development

Research and development expense increased by $3.7 million, or 87%, for the year ended December 31, 2015 as compared to 2014, due to increased expenditures in principally three areas: (i) a $3.0 million of cost increases related to our U.S. staged pivotal clinical trials consisting of costs to recruit, treat and monitor 346 subjects enrolled in the second stage of the trial, training of investigational site surgeons and purchases of test equipment used to monitor patient outcomes (ii) a $153,000 increase in expenses related to our pilot manufacturing facility used to provide the microlens used in the clinical trials;  and (iii) product development and regulatory affairs costs, which were higher by $512,000 due to additional personnel costs of $295,000, reduced professional fees of $37,000 related to intellectual property filings, an increase of $226,000 related to third party product development expenses and $28,000 in other overhead costs. During 2016 and 2017, we expect that the costs to continue our U.S. staged pivotal clinical trial will decline as compared to 2015 with the main focus of the trials shifting from patient recruiting and treatment to compliance.

Sales and Marketing

Sales and marketing expense increased by $1.1 million, or 64%, for the year ended December 31, 2015 as compared to the year ended December 31, 2014. We are not authorized to sell our microlens in the United States until we receive FDA approval to do so; therefore, our sales and marketing activities are limited to developing the markets outside the United States. During the year ended December 31, 2015, we incurred higher costs for sales and marketing personnel of $767,000, an increase of 96%, higher travel expenses related to supporting clients outside the United States of $181,000, an increase of 44%, and a slight increase in other marketing costs of $106,000, an increase of 24%. We expect sales and marketing costs to increase throughout 2016 and into 2017 as we implement our commercialization strategy in selected markets.

General and Administrative

General and administrative expenses declined by $98,000, or 1%, in the year ended December 31, 2015 as compared to the year ended December 31, 2014 due primarily to the one-time recognition of $3.4 million of deferred offering costs related to our initial public offering as general and administrative expenses during 2014. These costs consist primarily of legal and audit professional fees and printing costs in connection with our initial public offering that was delayed during the second and third quarters of 2014 for a period that exceeded 90 days. As a result of this delay, these costs, recognized prior to September 2014, were reclassified as general and administrative expense. Excluding the one-time effect of this write-down, general and administrative costs increased by $3.3 million principally due to the Company operating as a public company during 2015 and incurring higher costs in areas such as (i) stock-based compensation of $1.8 million; (ii) higher personnel costs of $0.2 million; (iii) higher professional fees of $0.7 million; (iv) higher insurance costs of $0.4 million; and (v) all other costs of $0.2 million.

Interest and Other Income and Expense

Interest and other expense for the year ended December 31, 2015 was $12,000, or $2.3 million less than the year ended December 31, 2014. The change is due primarily to the November 2014 and January 2015 conversion of $23.5 million and $1.6 million, respectively, of indebtedness from Presbia Holdings to certain of its subsidiaries to equity as part of the 2014 and 2015 Restructuring(s), respectively.  For additional information, see discussion above under the caption “Factors Affecting Our Expenses; Interest Expense. “

Net Loss

Our net loss of $18.2 million for the year ended December 31, 2015 was $2.5 million greater, or 16% greater, than the loss in the corresponding period of 2014 of $15.7 million, due primarily to (i) increased operating expenses of $8.1 million including $2.0 million increase of stock-based compensation costs; (ii) higher inventory provisions of $0.1 million; (iii) partially offset by the write off of the deferred offering costs of $3.4 million in 2014; and (iv) partially offset by $2.3 million decrease of interest expense. We expect that losses will continue through 2018 and possibly further, due to anticipated costs related to our U.S. staged pivotal clinical trial and ongoing costs required to develop the market outside of the United States for our microlens.

 

Liquidity and Capital Resources

On February 3, 2015, we closed the initial public offering of our ordinary shares. We sold a total of 4,166,667 ordinary shares in the offering at a public offering price of $10.00 per share. The aggregate proceeds from our initial public offering was $41.7 million, and we received net proceeds of approximately $36.8 million from the offering, after deducting $4.9 million of underwriting discounts and commissions and estimated offering expenses payable by us.

63


 

As of December 31, 2015, we have generated an accumulated deficit of $55.5 million. We funded operations through November 2014 by means of borrowings from Presbia Holdings and at an interest cost of 15% per annum, compoundi ng daily. From November 2014 to the consummation of our initial public offering, we funded our operations through borrowings from Presbia Holdings, at an interest rate equal to the then applicable monthly federal rate of interest for short-term loans, adju sted monthly, compounding daily.

On November 30, 2014, as part of the 2014 Debt Conversion, Presbia Holdings converted all the remaining indebtedness owed to Presbia Holdings by certain subsidiaries of Presbia Ireland, Limited at that time to equity. In the 2014 Debt Conversion, approximately $23.5 million of outstanding intercompany debt owed to Presbia Holdings was converted to equity of such subsidiaries. On January 14, 2015, as part of the 2015 Debt Conversion, Presbia Holdings converted all the remaining indebtedness owed to Presbia Holdings by a subsidiary of Presbia Ireland, Limited at that time to equity. In the 2015 Debt Conversion, approximately $1.6 million of outstanding intercompany debt owed to Presbia Holdings was converted to equity of such subsidiary.

Our primary uses of cash are to fund operating expenses, primarily general and administrative expenditures and research and development expenditures. Cash used to fund operating expenses is impacted by the timing of when we pay these expenses, as reflected in the change in our outstanding accounts payable and accrued expenses.

Our future capital requirements are difficult to forecast and will depend on many factors, including:

 

·

the progress, timing and completion of clinical trials for our products;

 

·

the number and characteristics of products that we pursue;

 

·

the progress, costs and results of our clinical trials;

 

·

the outcome, timing and cost of regulatory approvals;

 

·

delays that may be caused by changing regulatory requirements;

 

·

timing and amount of revenue resulting from sales of our microlens outside the U.S.; and

 

·

timing and investment in our commercialization efforts outside the U.S.

The following table summarizes our cash flows for the periods indicated (in thousands):

 

 

 

Year Ended December 31,

 

 

 

2015

 

 

2014

 

Net cash used in operating activities

 

$

(15,653

)

 

$

(9,514

)

Net cash used in investing activities

 

$

(196

)

 

$

(179

)

Net cash provided by financing activities

 

$

37,460

 

 

$

9,247

 

 

Prior to February 2015, we relied on funding from Presbia Holdings to fund our all of our operations including offering costs to complete our initial public offering on February 3, 2015. At December 31, 2015, we had an accumulated deficit of approximately $55.5 million and we expect to incur additional operating losses through 2018, and possibly further. As we continue to incur losses, our transition to profitability will depend on the successful development, approval and commercialization of our microlens. We may never achieve profitability, and unless and until we do, we will need to continue to raise additional capital. Based on our current business plan, we believe that our cash and cash equivalents at December 31, 2015, coupled with anticipated revenues outside of the United States will be sufficient to meet our anticipated cash requirements through the first quarter of 2017.  Our current commercialization strategy is targeted to countries where we believe we can both establish the market for our technology and achieve positive cash flow from such geographic market as soon as possible.  This commercialization strategy will undergo continual prioritization and in the future we may adjust our commercialization efforts to preserve our existing cash or realize better results than anticipated which could have a positive impact on cash.  Our U.S. pivotal clinical trial and planned FDA approval is our highest priority.  That priority, coupled with our current commercialization efforts outside the U.S., will likely result in our need to raise additional capital to fund our operations.  We may raise additional capital through equity offerings, debt financings, collaborations and/or licensing arrangements. Additional funds may not be available when we need them on terms that are acceptable to us, or at all. If adequate funds are not available on acceptable terms, we may be required to delay, reduce the scope of, or curtail, our operations. To the extent that we raise additional funds by issuing equity securities, our shareholders will experience dilution, and debt financing, if available, may involve restrictive covenants.

64


 

Contractual Obligations and Other Commitments

The following table summarizes our contractual obligations as of December 31, 2015 (in thousands).

 

 

 

Less than

 

 

1 to 3

 

 

3 to 5

 

 

More than

 

 

 

 

 

Contractual Obligations

 

1 year

 

 

years

 

 

years

 

 

5 years

 

 

Total

 

Facility Leases

 

$

178

 

 

$

70

 

 

$

 

 

$

 

 

 

248

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total contractual obligations

 

$

178

 

 

$

70

 

 

$

 

 

$

 

 

$

248

 

Off-Balance Sheet Arrangements

We have not entered into any off-balance sheet arrangements and do not have any holdings in variable interest entities.

Recent Accounting Pronouncements

Refer to Note 2 of Notes to the Consolidated Financial Statements, included in Item 8 of this report, for discussion of recent accounting pronouncements.

Item 7A. Quanti tative and Qualitative Disclosures About Market Risk.

Under SEC rules and regulations, as a smaller reporting company, we are not required to provide the information otherwise required by this item.

 

65


 

Item 8. Financial Statement s and Supplementary Data.

INDEX TO FINANCIAL STATEMENTS

 

 

Page

PRESBIA PLC

 

Consolidated Financial Statements:

 

 

 

Report of Independent Registered Public Accounting Firm - Squar Milner LLP

67

Report of Independent Registered Public Accounting Firm - Deloitte & Touche LLP

68

Consolidated Balance Sheets as of December 31, 2015 and 2014

69

Consolidated Statements of Operations and Comprehensive Loss for the Years Ended December 31, 2015 and 2014

70

Consolidated Statement of Shareholders’ Equity (Deficit) for the Years ended December 31, 2015 and 2014

71

Consolidated Statements of Cash Flows for the Years Ended December 31, 2015 and 2014

72

Notes to Consolidated Financial Statements

73

 

66


 

RE PORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of Presbia PLC

We have audited the accompanying consolidated balance sheet of Presbia PLC and subsidiaries (the “Company”) as of December 31, 2015 and the related consolidated statements of operations and comprehensive loss, shareholders’ equity (deficit), and cash flows for the year then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2015, and the results of their operations and their cash flows for the year then ended in conformity with U.S. generally accepted accounting principles.

 

/s/ SQUAR MILNER LLP

 

San Diego, California

March 25, 2016

 

 

 

67


 

RE PORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of Presbia PLC

Dublin, Ireland

We have audited the accompanying consolidated balance sheet of Presbia PLC, an Irish public limited company, (the “Company”) as of December 31, 2014, and the related consolidated statements of operations and comprehensive loss, shareholders’ deficit, and cash flows for the year then ended.  Our audit also included the financial statement schedule listed in the index at item 15(a)(2).  These financial statements and the financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and the financial statement schedule based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion . An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2014, and the results of its operations and its cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.  Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

As discussed in Note 1 to the consolidated financial statements, the financial statements include allocations of expenses from Presbia Holdings, the Company’s ultimate controlling shareholder. These allocations may not be reflective of the actual level of costs or debt which would have been incurred had the Company operated as a separate entity apart from Presbia Holdings. Also as disclosed in Note 10, the Company has arrangements with related parties, including Presbia Holdings.

/s/ Deloitte & Touche LLP

Los Angeles, California

March 31, 2015

 

 

 

68


 

CONSOLIDATED FINANCIAL STATEMENTS

PRESBIA PLC

Consolidated Balance Sheets

(in thousands, except shares and par value amount)

 

 

 

December 31,

 

 

 

2015

 

 

2014

 

Assets

 

 

 

 

 

 

 

 

Current assets

 

 

 

 

 

 

 

 

Cash

 

$

21,749

 

 

$

138

 

Accounts receivable

 

 

116

 

 

 

25

 

Inventory

 

 

430

 

 

 

378

 

Prepaid expenses and other current assets

 

 

242

 

 

 

122

 

Total current assets

 

 

22,537

 

 

 

663

 

Property and equipment, net

 

 

775

 

 

 

747

 

Intangible assets

 

 

32

 

 

 

46

 

Other assets

 

 

63

 

 

 

886

 

Total assets

 

$

23,407

 

 

$

2,342

 

Liabilities and shareholders’ equity (deficit)